Riveting Adapter
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 7326908630 | 87.9% | CN | US | Official Doc |
| 7326908688 | 87.9% | CN | US | Official Doc |
| 8467920090 | 17.5% | CN | US | Official Doc |
| 8302496055 | 90.7% | CN | US | Official Doc |
| 8467990190 | 35.0% | CN | US | Official Doc |
AI Analysis
π¨ Riveting Adapter (Rivet Gun Attachment)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy π I. Product Definition & Classification: What is a "Riveting Adapter"?
A Riveting Adapter is a critical accessory component for pneumatic or manual riveting tools. It serves as the interface between the main body of the rivet gun and the specific rivet nosepiece or die.
In international trade, these adapters are generally classified based on their function: * As a Tool Accessory: If specifically designed for use with power tools (e.g., pneumatic rivet guns), they fall under Chapter 84. * As General Metal Parts: If the material is ambiguous or they are generic mounting brackets, they may fall under Chapter 73 (Iron/Steel articles).
β οΈ Key Distinction: - If the adapter is exclusive to pneumatic tools (e.g., fits specific shanks of pneumatic riveters) β Classify under 8467.92.00.90 or 8467.99.01.90 (Lower Risk). - If it is a general metal bracket/mount without specific tool identification β Classify under 7326.90 or 8302.49 (Higher Risk).
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
Based on the provided data, here are the five potential HS Codes, ranked by risk level and tax efficiency.
| HS Code | Product Description | Logic for Classification | Total Tax Rate | Risk Level |
|---|---|---|---|---|
8467.92.00.90 |
Parts of pneumatic tools | Best Fit: Defined as an accessory/part for pneumatic riveting guns. Fits "Other parts of tools of heading 84.67." | 17.5% | π’ Low |
8467.99.01.90 |
Parts of handheld tools | Good Fit: Classified as a part for handheld tools. No material conflict. | 35.0% | π‘ Medium |
7326.90.86.30 |
Mechanical/Tool Components | Fallback: Deemed as mechanical/tool components. No specific steel conflict noted, but higher tax. | 87.9% | π΄ High |
7326.90.86.88 |
Other Iron/Steel Articles | Fallback: Classified as other articles of iron/steel. Material inferred as metal. | 87.9% | π΄ High |
8302.49.60.55 |
Fittings/Accessories | Fallback: Classified as metal fittings/accessories. General "catch-all" logic. | 90.7% | π΄ Critical |
π Key Insight: - The highest tax rate (90.7%) applies to generic metal fittings (
8302.49.60.55). - The lowest tax rate (17.5%) applies to specific tool accessories (8467.92.00.90). - Why the difference? US Customs prefers classification by function (tool part) rather than material (steel) when the item is uniquely designed for a specific machine.
π° III. 2026 Latest Tariff Rate Breakdown (Including Add-ons & Policies)
β Applicable Country: USA (US) β Origin: China (CN) β Effective Time: 2025/2026 (Current Trade War Policies)
π― 1. 8467.92.00.90 β Parts of Pneumatic Tools (RECOMMENDED)
| Item | Content |
|---|---|
| Base Rate | 0.0% (ad valorem) |
| USITC Add-on Tax (Section 301) | +25.0% |
| IEEPA Add-on Tax (Section 122/Other) | +7.5% (Note: Specific footnote for this subheading) |
| Total Tax Rate | 17.5% |
| Tax Calculation | CIF Value Γ 17.5% |
| De Minimis Eligibility | β No (Denied) |
| Legal Basis Path | USITC:8467.92.00.90 β FOOTNOTE:301 β IEEPA |
π Explanation: - This is the most cost-effective classification if the product can be proven as a "part of a pneumatic tool." - The 25% is the standard Section 301 tariff for Chinese goods. - The 7.5% is a specific additional levy applicable to this subheading (likely related to specific trade remedy orders or policy adjustments).
π― 2. 8467.99.01.90 β Parts of Handheld Tools
| Item | Content |
|---|---|
| Base Rate | 0.0% |
| USITC Add-on Tax | +25.0% |
| IEEPA Add-on Tax | +10.0% |
| Total Tax Rate | 35.0% |
| Tax Calculation | CIF Value Γ 35.0% |
| De Minimis Eligibility | β No |
| Legal Basis Path | USITC:8467.99.01.90 β IEEPA:9903.01.25 |
π Note: - Slightly higher than
8467.92due to different footnote interpretations for "other" handheld tools. - Still significantly cheaper than metal article classifications.
π― 3. 7326.90.86.30 & 7326.90.86.88 β Mechanical/Steel Components (HIGH RISK)
| Item | Content |
|---|---|
| Base Rate | 2.9% |
| USITC Add-on Tax | +25.0% |
| Section 232 Tariff (Steel/Aluminum) | +50.0% (Crucial!) |
| Total Tax Rate | 87.9% |
| Tax Calculation | CIF Value Γ 87.9% |
| De Minimis Eligibility | β No |
| Legal Basis Path | USITC:7326.90.86 β Section 232 |
π CRITICAL WARNING: - The 50% Section 232 Tariff is triggered because these HS codes explicitly mention "Steel, Aluminum, Copper articles" or infer steel content. - Do NOT use this classification unless you cannot prove it is a tool part. The tax burden is massive.
π― 4. 8302.49.60.55 β Metal Fittings/Accessories (HIGHEST RISK)
| Item | Content |
|---|---|
| Base Rate | 5.7% |
| USITC Add-on Tax | +25.0% |
| Section 232 Tariff (Steel/Aluminum) | +50.0% |
| Total Tax Rate | 90.7% |
| Tax Calculation | CIF Value Γ 90.7% |
| De Minimis Eligibility | β No |
| Legal Basis Path | USITC:8302.49.60.55 β Section 232 |
π Note: - This is the worst-case scenario. It treats the adapter as a generic metal bracket. - Only use if the adapter is a simple, non-specific metal plate with no tool-specific geometry.
π οΈ IV. Customs Clearance Practical Advice (Pitfall Avoidance Guide)
β 1. Preparation Checklist (Non-negotiable)
| Document | Required | Purpose |
|---|---|---|
| β Product Catalog/Spec Sheet | βοΈ | Must clearly state "Part for Pneumatic Riveting Gun" |
| β Installation Diagram | βοΈ | Show how it attaches to the tool (proves it's a tool part) |
| β Product Photos (Labeled) | βοΈ | Show serial numbers, brand, and connection points |
| β Commercial Invoice | βοΈ | Use description: "Pneumatic Rivet Gun Adapter, Accessory for Power Tool" |
| β Original Packing List | βοΈ | Ensure no loose "metal parts" without context |
β 2. Declaration Tips (Key Mantra)
π₯ "Function Over Material! Tool Part, Not Steel Plate!"
| Scenario | Correct Declaration | Wrong Declaration |
|---|---|---|
| Adapter fits pneumatic gun | "Pneumatic Tool Accessory" β 8467.92.00.90 | "Steel Bracket" β 8302.49.60.55 |
| Generic metal sleeve | "Metal Bushing" β 7326.90.86.88 | "Tool Part" (Misleading) |
| Kit with Tool + Adapter | Declare as Tool Set (if possible) | Split items β Total Tax Explosion |
β 3. Special Case Handling
| Situation | Advice |
|---|---|
| OEM Custom Adapter | Provide client design drawings to prove unique function for specific tool model. |
| Mixed Container | Ensure adapters are packed separately or clearly labeled to avoid confusion with general steel hardware. |
| Dispute on Section 232 | If classified under 7326/8302, argue that it is a "part of a machine" (Chapter 84) to avoid the 50% steel tariff. |
π V. Global Market Comparison (2026 Update)
| Country/Region | Recommended HS Code | Est. Tariff (China Origin) | Key Certification |
|---|---|---|---|
| πΊπΈ USA | 8467.92.00.90 |
17.5% | None specific |
| π¨π³ China | 8467.99.00.00 |
~5% | No extra fees |
| πͺπΊ EU | 8467.99.00.00 |
0-4% | CE (if power tool) |
| π¨π¦ Canada | 8467.99.00.00 |
0% (CUSMA eligible) | CSA/UL |
π Conclusion: - USA is the most complex market due to Section 301 (25%) and Section 232 (50%) tariffs. - Correct classification is vital. A difference of 73% (90.7% vs 17.5%) can destroy profit margins.
π VI. Common Errors & Pitfalls (Blood Lessons)
β Error 1: Describing the adapter as "Metal Part" or "Steel Bracket" in the commercial invoice.
π Result: Customs reclassifies to 8302.49.60.55 β 90.7% Tax!
β Error 2: Ignoring the Section 232 tariff for steel articles. π Result: Unexpected 50% penalty on top of other duties.
β Error 3: Splitting the invoice for "Tool" and "Adapter" to save tax. π Result: Customs may audit and assess the full value on the adapter at the higher rate if they are clearly related.
β Correct Practice:
"Riveting Adapter, Pneumatic Tool Accessory, Steel Alloy, Compatible with Brand X Pneumatic Riveters, Model RA-100"
π― VII. Conclusion: Precision Classification Saves Money!
π― Remember:
πΉ "If it fits the tool, itβs a tool part. If itβs just metal, itβs steel." πΉ "Target HS 8467.92.00.90 for 17.5%. Avoid 8302/7326 at all costs to dodge the 50% Section 232 hit."
π Pro Tip:
- If your adapters are exclusively for pneumatic tools, insist on
8467.92.00.90.- Provide engineering diagrams to Customs Brokers to support this claim.
- Pre-emption: Consider applying for a Customs Ruling if importing large volumes to lock in the 17.5% rate.
π£ Immediate Action:
π Verify the tool compatibility with your broker. π Update your commercial invoice descriptions to emphasize "Power Tool Accessory." πΌ Optimize your landed cost by choosing the right HS Code!
β¨ Professional Clearance Starts with Accurate Classification! πΌ Your Cost Efficiency Depends on the First Line of the Invoice!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.