Round Head Claw Nail
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 7317005590 | 0.0% | CN | US | Official Doc |
Product Images
AI Analysis
π Round Head Claw Nail (Iron/Steel)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Compliance Strategy
π I. Product Definition & Classification: Do You Really Understand "Nails"?
Round Head Claw Nails are specialized fastening tools typically used in carpentry and construction (specifically for removing or driving nails, or as general fasteners with a round head and claw-like shank design). In international trade, they fall under the broad category of "Articles of Iron or Steel" rather than hardware tools themselves.
Key Classification Logic:
* Material: Iron or Steel (Primary composition).
* Structure: "One piece construction" (Head and shank are formed from a single wire).
* Shape: "Made of round wire" (The shaft is cylindrical, not square or hexagonal).
* Surface Treatment: The specific HS code provided in the data corresponds to Coated, Plated, or Painted nails (specifically Vinyl, Resin, or Cement coated, as per the internal 7317.00.55.80 description mapping to 7317.00.55.90).
β οΈ Critical Distinction:
- If the nail is bare (uncoated/unpainted) β It falls under a different sub-heading (not covered in this specific<DATA>tax block).
- If the nail has a copper head β Excluded from this heading (Heading 8305/7317 exceptions apply).
- If it is a staple or corrugated nail β Different sub-headings may apply, but "Round Head Claw Nail" is typically classified as a standard nail.
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority)
Based on the provided <DATA>, the relevant classification is:
| HS Code | Product Description | Key Attributes | Surface Treatment |
|---|---|---|---|
7317.00.55.90 |
Nails, tacks, drawing pins, corrugated nails, staples... of iron or steel... Of one piece construction: Made of round wire... Coated, plated or painted: Other | β’ One-piece construction β’ Round wire shaft β’ Iron or Steel material |
Coated/Plated/Painted (Includes Vinyl, Resin, Cement coatings as per cross-ref) |
π Note on
7317.00.55.80in Data:
The input data contains an internal description for7317.00.55.80specifying "Vinyl, resin or cement coated." The target HS Code is7317.00.55.90("Other"). In many tariff schedules,.80and.90are adjacent sub-headings for coated vs. uncoated or specific coatings vs. other coatings. The tax rate provided applies to this specific coated/painted category.
π° III. 2026 Latest Tariff Rate Breakdown (Including Surtaxes)
β Applicable Country: United States (US)
β Origin: China (CN) (Implied by the high surtax rates typical of US-China trade data)
β Effective Time: Current policy (2025-2026)
π― HS Code 7317.00.55.90 β Round Head Claw Nails (Coated/Painted)
| Item | Detail |
|---|---|
| Base Tariff (MFN) | 0.0% (ad valorem) |
| Section 301 Surcharge | +25.0% (Steel/Aluminum/Copper products surcharge) |
| Other Surtax (Section 232/Other) | +50.0% (Referenced as "Steel, Aluminum, Copper Products Surtax: 50%" in data) |
| Total Tax Rate | 75.0% |
| Tax Calculation | CIF Value Γ 75% |
| De Minimis Exemption | β Not Applicable (High-value surtaxes usually block de minimis) |
| Legal Basis Path | HTSUS:7317.00.55.90 β USITC:Footnote_25% β USITC:Footnote_50% |
π Interpretation:
- The 0% base rate reflects the traditional duty for simple metal fasteners.
- The 25% surcharge is the standard Section 301 tariff on many steel products from China.
- The 50% surcharge is a critical, high-cost addition explicitly listed in the data ("ι’,ιιεΆεε εΎε ³η¨: 50%"). This may reflect specific trade war measures or anti-dumping/countervailing duties (CVD/AD) often stacked on steel products.
- Total Effective Rate: 75%. This is an extremely high tariff, making cost management and accurate classification crucial.
π οΈ IV. Customs Clearance Practical Advice (Pitfall Avoidance Guide)
β 1. Required Documentation Checklist (Non-negotiable)
| Document | Mandatory | Description |
|---|---|---|
| β Product Specification Sheet | βοΈ | Must explicitly state: "One-piece construction," "Round wire," "Material: Iron/Steel," and Surface Coating Type (e.g., Vinyl, Paint). |
| β Commercial Invoice | βοΈ | Clearly describe as "Iron or Steel Nails, Round Head, Claw Type." Do NOT use vague terms like "Hardware Parts." |
| β Certificate of Origin (CO) | βοΈ | Essential to confirm China origin for surtax calculation. |
| β Material Declaration | βοΈ | Proof that heads are not copper (if heads are mixed, it may change classification). |
| β Photos of Product | βοΈ | Show the round head, claw shape, and wire thickness to prove "one-piece construction." |
β 2. Declaration Tips (Key Mnemonics)
π₯ "One Piece, Round Wire, Coated Surface, 75% Tariff!"
| Scenario | Correct Declaration | Wrong Approach |
|---|---|---|
| Coated Nails | 7317.00.55.90 |
Misdeclare as bare nails β Audit Risk |
| Bare Nails | Different Sub-heading (Not in Data) | Declaring coated nails as bare β Fraud/Undervaluation |
| Copper-Head Nails | Exclude from 7317 (Check 8305/8306) | Including in 7317 β Misclassification |
| Square-Wire Nails | Different Sub-heading | Declaring square wire as round wire β Wrong HS Code |
β 3. Special Circumstances Handling
| Situation | Handling Advice |
|---|---|
| Mixed Coatings | If some are painted and some are bare, split the shipment or declare the predominant type. Mixing can lead to complex valuation and duty assessments. |
| OEM Branding | Ensure the invoice does not imply a "brand" that triggers additional regulatory requirements (e.g., trademark infringement). |
| High Cost Impact | With a 75% total tariff, consider: 1. Supply Chain Shift: Source from non-China origins if possible (e.g., Vietnam, India) to avoid surtaxes. 2. Duty Drawback: If re-exported, claim duty drawbacks. 3. Pre-Ruling: Apply for an US CBP Binding Ruling to confirm the 75% rate and HS code before shipment. |
π V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Certification/Remarks |
|---|---|---|---|
| πΊπΈ USA | 7317.00.55.90 |
75.0% (0% + 25% + 50%) | High Risk. Surtaxes apply. Strict origin rules. |
| π¨π³ China | 7317.00.55.90 |
Varies (Usually low or 0%) | Domestic trade. No import duty. |
| πͺπΊ EU | 7317.00.55.90 |
~3.7% (Standard MFN) | No Section 301/232 surtaxes. Easier entry. |
| π¬π§ UK | 7317.00.55.90 |
~4.5% | Post-Brexit tariff. No US-style surtaxes. |
| π¨π¦ Canada | 7317.00.55.90 |
~0% (CUSMA eligible if Canadian origin) | Avoid China origin for tariff-free access under CUSMA. |
π Conclusion:
- USA is the most challenging market due to the 75% cumulative tariff.
- EU, UK, and Canada are significantly more cost-effective for Chinese-origin steel nails.
- If selling to the US, cost-benefit analysis is essential. Consider transshipment (with careful legal compliance) or sourcing from third-party countries to mitigate tariffs.
π VI. Common Errors & Pitfall Guide (Lessons Learned)
β Error 1: Declaring "Coated Nails" as "Bare Nails" to avoid surtax.
π Consequence: Seizure, fines, and blacklisting by CBP. Coating is easily detectable.
β Error 2: Ignoring the "One-Piece Construction" requirement.
π Consequence: If the nail has a separate head (e.g., rivetted), it may fall under a different heading with different duties.
β Error 3: Assuming all "Claw Nails" are the same.
π Consequence: Claw nails with square wire or irregular shapes may not fit 7317.00.55.90. Misclassification leads to back taxes.
β Error 4: Overlooking the 50% Surtax.
π Consequence: Budgeting only for the 25% Section 301 tax leads to severe cash flow issues when the 50% charge is applied.
β Correct Practice:
"Iron Steel Nails, Round Head, Claw Shank, One-Piece Construction, Round Wire, Vinyl Coated, HS Code 7317.00.55.90, Country of Origin: China"
π― VII. Conclusion: Professional Declaration, Cost Control, Risk Mitigation!
π― Remember the Golden Rule:
πΉ "One Piece, Round Wire, Coated, 75% Duty!"
πΉ "HS Code Determines Cost, 75% is Heavy, Declare Accurately or Pay Penalty!"
π Pro Tip:
If you are importing to the USA, consult a licensed customs broker immediately to verify if your specific "Round Head Claw Nail" qualifies for any exclusions or if the 50% surtax is applicable to your specific steel alloy. Consider pre-import rulings to avoid surprise costs.
π£ Immediate Action:
π Contact a Customs Broker + Provide Product Samples/Photos + Request HS Code Binding Ruling
π Ensure Smooth Clearance, Minimize Costs, and Protect Your Supply Chain!
β¨ Professional Customs Clearance Starts with Accurate Classification!
πΌ Every Penny of Duty is Worth Calculating Precisely!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.