Rubber Gloves for Mechanical Repair
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 6116109500 | 24.5% | CN | US | Official Doc |
| 3926204050 | 16.5% | CN | US | Official Doc |
| 4015191150 | 38.0% | CN | US | Official Doc |
| 6116106500 | 24.5% | CN | US | Official Doc |
| 4015195100 | 49.0% | CN | US | Official Doc |
Product Images
AI Analysis
𧀠Rubber Gloves for Mechanical Repair (Industrial Use)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Breakdown | Professional Level Strategy
π I. Product Definition & Classification: Do You Really Understand "Rubber Gloves"?
Rubber gloves for mechanical repair are protective equipment designed to protect hands from oils, chemicals, abrasions, and mechanical hazards during maintenance and repair work. In international trade, their classification depends heavily on material composition (natural vs. synthetic/rubber) and manufacturing method (knitted, laminated, or vulcanized).
β οΈ Key Distinction:
- If the gloves are knitted or crocheted with rubber impregnation/coating β Classified under Chapter 61 (Clothing Accessories).
- If the gloves are solid rubber/vulcanized (molded, no fabric base) β Classified under Chapter 40 (Rubber Articles).
- If the gloves are made of plastic/rubber mix with specific manufacturing logic β May fall under Chapter 39 (Plastics).
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Classification Logic | Applicable Scenario |
|---|---|---|---|
6116.10.95.00 |
Rubber agricultural/hand gloves, knitted/crocheted, rubber material | Fits the category of knitted/crocheted gloves of plastic or rubber. Material is rubber, form is glove. | Knitted gloves with rubber coating/impregnation for general repair. |
3926.20.40.50 |
Rubber gloves for mechanical repair, plastic/rubber mix logic | Classification logic aligns with plastic products in glove applications. Consistency in usage-based classification. | Gloves where material composition is interpreted as plastic-like or mixed polymer. |
4015.19.11.50 |
Rubber mechanical repair gloves, vulcanized rubber clothing/accessories | Fits clothing and accessories made of vulcanized rubber (including gloves). | Solid molded rubber gloves, no textile base. |
6116.10.65.00 |
Rubber gloves, rubber material, glove form | Reasonable inference for gloves impregnated or coated with rubber. | Similar to 6116.10.95, specific sub-category for coated gloves. |
4015.19.51.00 |
Rubber mechanical repair gloves, vulcanized rubber clothing/accessories | Meets classification requirements for vulcanized rubber clothing and accessories (gloves). | High-end vulcanized rubber industrial gloves. |
π Important Reminder:
- Knitted + Rubber Coating β Chapter 61 (6116.xx.xx.xx)
- Solid Vulcanized Rubber β Chapter 40 (4015.xx.xx.xx)
- Plastic-like/Rubber Mix β Chapter 39 (3926.xx.xx.xx)
- Misclassification Risk: Declaring vulcanized rubber gloves as knitted ones (or vice versa) will lead to significant tax differences and customs delays.
π° III. 2026 Latest Tariff Rate Breakdown (Including Surcharge & Policy Add-ons)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Time: 2025/2026 (Post-November 10, 2025)
π― 1. 6116.10.95.00 ββ Knitted/Crocheted Rubber Gloves
| Item | Detail |
|---|---|
| Basic Tariff | 7.0% |
| Section 301 Surcharge | 7.5% |
| Section 122 Tariff | 10.0% |
| Total Tariff | 24.5% |
| Tax Calculation | CIF Value Γ 24.5% |
| De Minimis Exemption? | β Not Eligible (Deny de minimis) |
| Legal Basis Path | Section 301 β Section 122 β HTSUS 6116.10.95.00 |
π Explanation:
- "Section 301 Surcharge 7.5%" is part of the USITC Footnote 9903 series for China-origin goods.
- "Section 122 Tariff 10%" is a specific add-on for certain textile/garment categories from China.
- Total 24.5% is a high tariff, requiring proactive planning.
π― 2. 3926.20.40.50 ββ Plastic/Rubber Mixed Logic Gloves
| Item | Detail |
|---|---|
| Basic Tariff | 6.5% |
| Section 301 Surcharge | 0.0% |
| Section 122 Tariff | 10.0% |
| Total Tariff | 16.5% |
| Tax Calculation | CIF Value Γ 16.5% |
| De Minimis Exemption? | β Not Eligible (Deny de minimis) |
| Legal Basis Path | Section 122 β HTSUS 3926.20.40.50 |
π Note:
- This classification offers a lower total tax rate (16.5%) compared to others.
- No Section 301 Surcharge, which is a significant cost advantage.
- Suitable for gloves where the material can be legally argued as "plastic-based" or mixed polymer with glove application logic.
π― 3. 4015.19.11.50 ββ Vulcanized Rubber Gloves
| Item | Detail |
|---|---|
| Basic Tariff | 3.0% |
| Section 301 Surcharge | 25.0% |
| Section 122 Tariff | 10.0% |
| Total Tariff | 38.0% |
| Tax Calculation | CIF Value Γ 38.0% |
| De Minimis Exemption? | β Not Eligible (Deny de minimis) |
| Legal Basis Path | Section 301 (25%) β Section 122 β HTSUS 4015.19.11.50 |
π Critical Warning:
- "Section 301 Surcharge 25%" is the highest among all options.
- This results in a very high total tax of 38.0%.
- Must be avoided if cost is a primary concern, unless the product strictly requires this classification.
π― 4. 6116.10.65.00 ββ Rubber Impregnated Gloves
| Item | Detail |
|---|---|
| Basic Tariff | 7.0% |
| Section 301 Surcharge | 7.5% |
| Section 122 Tariff | 10.0% |
| Total Tariff | 24.5% |
| Tax Calculation | CIF Value Γ 24.5% |
| De Minimis Exemption? | β Not Eligible (Deny de minimis) |
| Legal Basis Path | Section 301 β Section 122 β HTSUS 6116.10.65.00 |
π Note:
- Identical tax rate to6116.10.95.00.
- Choose based on specific sub-category accuracy (coated vs. general knitted).
π― 5. 4015.19.51.00 ββ High-Spec Vulcanized Rubber Gloves
| Item | Detail |
|---|---|
| Basic Tariff | 14.0% |
| Section 301 Surcharge | 25.0% |
| Section 122 Tariff | 10.0% |
| Total Tariff | 49.0% |
| Tax Calculation | CIF Value Γ 49.0% |
| De Minimis Exemption? | β Not Eligible (Deny de minimis) |
| Legal Basis Path | Section 301 (25%) β Section 122 β HTSUS 4015.19.51.00 |
π Critical Warning:
- This is the MOST EXPENSIVE classification with a 49.0% total tax.
- Combines high basic tariff (14%) with maximum Section 301 surcharge (25%).
- Strongly avoid unless product characteristics strictly mandate this HS code.
π οΈ IV. Customs Clearance Practical Advice (Battle-Tested Pitfall Avoidance)
β 1. Required Documentation Checklist (No Exceptions)
| Document | Mandatory? | Description |
|---|---|---|
| β Product Specification Sheet | βοΈ | Material composition (natural/synthetic rubber), manufacturing process (knitted/molded), coating thickness. |
| β Technical Diagrams | βοΈ | Show structure: fabric base + rubber layer OR solid rubber mold. Crucial for Chapter 61 vs. 40. |
| β Product Photos (Including Label) | βοΈ | Clear view of brand, model, material label, and usage instructions. |
| β Third-Party Test Reports | βοΈ | ASTM, ISO, or EN standards for chemical resistance, abrasion, and durability. |
| β Commercial Invoice | βοΈ | Must explicitly state "Rubber Gloves for Mechanical Repair" and material details. |
| β Certificate of Origin (CO) | βοΈ | For China origin, subject to high tariffs. If re-exported from non-China, may reduce tax. |
| β Packing List | βοΈ | Detail units per carton, weight, and dimensions. Avoid mixed goods in one shipment. |
β 2. Declaration Tips (Key Mantra)
π₯ "Material Dictates Chapter, Process Determines Sub-Code, Accurate Name Saves Dollars!"
| Scenario | Correct Declaration | Wrong Practice |
|---|---|---|
| Knitted Gloves with Rubber Coating | 6116.10.95.00 or 6116.10.65.00 |
Declare as "Solid Rubber Gloves" β 38%-49% |
| Solid Molded Rubber Gloves | 4015.19.11.50 or 4015.19.51.00 |
Declare as "Knitted Gloves" β Risk of penalty + back taxes |
| Plastic/Rubber Mixed Logic | 3926.20.40.50 |
Declare as "Rubber" β Higher tax |
| Mixed Shipment (Knitted + Solid) | Split Declaration | Combined Declaration β Confusion & Delays |
β 3. Special Handling Cases
| Scenario | Handling Advice |
|---|---|
| OEM Custom Gloves | Provide client specs + design blueprints to justify specific HS code. |
| Gloves with Cotton Lining | If cotton > rubber by weight/value, may still be Chapter 61, butιζδΎ proof. |
| Chemical-Resistant vs. Mechanical | If primarily for chemical resistance, ensure material claims align with HS logic. |
| Re-export from Vietnam/Mexico | IEEPA Exemption Possible: Tax may drop to 0%-5% if origin is changed. |
π V. Global Market Customs Clearance Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff | Certification | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 3926.20.40.50 |
16.5% (Lowest) | ASTM/ISO | Avoid 4015 due to 49% tax. |
| π¨π³ China | 6116.10.95.00 |
5-7% | CCC/RoHS | No additional surcharges. |
| πͺπΊ EU | 4015.19 |
0-2.5% | CE/REACH | No Section 301/122. |
| π¬π§ UK | 6116.10 |
0-3% | UKCA | Post-Brexit, favorable rates. |
| π¦πΊ Australia | 3926.20 |
5% | RCM | Moderate tax. |
π Conclusion:
- USA is the most complex market due to Section 301 & 122 tariffs.
-3926.20.40.50offers the lowest US tariff (16.5%) if legally justifiable.
- China-origin goods face high taxes in the US; consider supply chain optimization.
π VI. Common Mistakes & Pitfall Guide (Blood-Teaching Lessons)
β Mistake 1: Declaring "Solid Rubber Gloves" as "Knitted Gloves"
π Consequence: Customs audit β Back taxes + Penalties (Tax difference up to 24.5%).
β Mistake 2: Ignoring Section 122 Tariff
π Consequence: Unexpected 10% add-on on top of basic + Section 301 tariffs.
β Mistake 3: Vague Description ("Gloves")
π Consequence: Customs assigns highest possible rate (49%) due to uncertainty.
β Mistake 4: Mixing Knitted and Solid Gloves in One Box
π Consequence: Split Inspection Delay β Storage fees + Demurrage.
β Correct Practice:
"Rubber-Coated Knitted Gloves, Cotton Base, Nitrile Rubber Coating, Size 9, Model XYZ, ASTM D6319 Compliant"
π― VII. Conclusion: Precise Classification, Time-Saving, Cost-Efficient!
π― Remember the Mantra:
πΉ "Knitted = Ch61 (24.5%), Plastic-Logic = Ch39 (16.5%), Solid Rubber = Ch40 (38-49%)"
πΉ "HS Code Determines Fate, Tax Rate Varies by 25%, Declaration Step Matters, Cost Difference is Huge!"
π Pro Tip:
If your gloves can be argued as "Plastic-like or Mixed Polymer" (3926.20.40.50), you save 8-12.5% in taxes compared to Chapter 61 and 20-32.5% compared to Chapter 40.
Apply for Advance Ruling (Pre-classification) to secure the 16.5% rate.
π£ Take Action Now:
π Contact Professional Customs Broker + Provide Product Specs + Apply for HS Code Advance Ruling
π Ensure Smooth Customs Clearance, Efficient Export, Profit Maximization!
β¨ Professional Clearance Starts with Accurate Classification!
πΌ Every Penny of Your Cost Deserves Precise Calculation!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.