Saw Blade Manual Tool Accessory
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 8202100000 | 35.0% | CN | US | Official Doc |
Product Images
AI Analysis
πͺ Handsaws & Metal Saw Blades (Manual Tool Accessories)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
π I. Product Definition & Classification: Do You Really Understand "Saw Blades"?
Handsaws and their metal parts, including blades for all kinds of saws (whether toothed, slitting, slotting, or toothless), fall under the broad category of Chapter 82: Tools, Implements, Cutlery, Spoons and Forks of Base Metal. In international trade, precise classification is critical because the tax liability varies significantly between the hand tool itself and the replaceable blade.
Key Distinction: * The Handle/Body (Non-Blade Parts): Classified under 8202.99.00.00. These are considered parts of handsaws but not blades. * The Blade (Toothed/Toothless): Classified under 8202.10.00.00. This includes saw blades of all kinds, even if they are accessories.
β οΈ Critical Classification Point:
- If the item is a complete handsaw (handle + blade) or just the handle/parts without the cutting element β 8202.99.00.00
- If the item is a saw blade (whether for a hand saw, band saw, or circular saw) β 8202.10.00.00
- Note: Even if you are importing "accessories" like replacement blades, if they are blades, they go to 8202.10.00.00, NOT the parts code.
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority)
Based on the provided data for "Saw blade manual tool accessory", we focus on the two primary codes involved in this category.
| HS Code | Product Description | Applicable Scenario | Blade Type |
|---|---|---|---|
8202.10.00.00 |
Saw blades of all kinds (including slitting, slotting, or toothless) | Replacement blades for hand saws, circular saws, band saws, etc. | β Yes (It is a Blade) |
8202.99.00.00 |
Other saw blades, and parts thereof (excluding blades) | Handles, frames, screws, or metal parts of handsaws (non-cutting) | β No (It is a Part) |
π Key Reminder:
- "Saw Blade" implies a cutting element. Even if it's a "toothless" slotting blade, it falls under 8202.10.00.00.
- "Parts" (like a wooden handle or metal frame) fall under 8202.99.00.00.
- Do not mix them. If you import a kit (handle + blade), they must be declared separately or the dominant component must be identified. For "accessories" (blades), 8202.10.00.00 is the correct code.
π° III. 2026 Latest Tariff Rate Detailed Explanation (Including Additional Duties)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Time: As per current USITC and IEEPA regulations
π― 1. 8202.10.00.00 ββ Saw Blades of All Kinds
| Item | Content |
|---|---|
| Base Duty Rate | 0.0% (Ad Valorem) |
| Additional Duty (Section 301) | +25.0% |
| Total Duty Rate | 25.0% |
| Tax Calculation | CIF Value Γ 25% |
| De Minimis Exemption | β Not Applicable (Section 301 duties apply regardless of value) |
| Legal Basis | USITC Heading 8202.10.00.00 + Section 301 Footnote |
π Explanation:
- The base tariff for saw blades is 0%. This is because the US considers essential tools for construction and manufacturing as low-tariff items.
- However, due to Section 301 of the Trade Act, products classified under 8202.10.00.00 originating from China are subject to an additional 25% tariff.
- Total Liability: 25%. There is no base tax to combine with; the 25% is applied directly to the customs value.
π― 2. 8202.99.00.00 ββ Other Parts of Handsaws (Non-Blade)
| Item | Content |
|---|---|
| Base Duty Rate | 0.0% (Ad Valorem) |
| Additional Duty (Section 301) | +25.0% |
| Total Duty Rate | 25.0% |
| Tax Calculation | CIF Value Γ 25% |
| De Minimis Exemption | β Not Applicable |
| Legal Basis | USITC Heading 8202.99.00.00 + Section 301 Footnote |
π Explanation:
- Similar to blades, the parts (handles, frames) also enjoy a 0% base duty.
- They are also subject to the 25% Section 301 additional duty.
- Total Liability: 25%.
- Crucial: Even if you import just a handle, if it's classified under 8202.99.00.00, it still incurs the 25% duty if of Chinese origin.
π οΈ IV. Customs Clearance Practical Advice (Real-World Pitfall Avoidance)
β 1. Documentation Checklist (Non-Negotiable)
| Document | Mandatory? | Notes |
|---|---|---|
| β Product Specification Sheet | βοΈ | Must clearly state: "Saw Blade" vs. "Handle". Include dimensions, tooth count, material (bi-metal, steel, etc.). |
| β Commercial Invoice | βοΈ | Must explicitly describe the item as "Saw Blade" or "Part of Handsaw". Do not use vague terms like "Tool Accessory". |
| β Packing List | βοΈ | Separate items if importing both blades and handles. |
| β Country of Origin Certificate | βοΈ | Critical for determining Section 301 applicability. |
| β Product Photos | βοΈ | Show the blade teeth (if any) and the overall shape to justify the HS Code. |
β 2. Declaration Tips (Key Mantra)
π₯ "Blades are Blades, Parts are Parts. Don't Mix Them, or You'll Pay Twice!"
| Scenario | Correct Declaration | Wrong Practice |
|---|---|---|
| Replacement Saw Blade | HS: 8202.10.00.00 |
Declare as "Tool Part" β Risk of reclassification + penalties |
| Saw Handle/Frame | HS: 8202.99.00.00 |
Declare as "Blade" β Incorrect description, potential audit |
| Complete Handsaw | Declare both parts separately if possible, or dominant component | Lump sum declaration without detail β Customs delay |
| Toothless Slotting Blade | HS: 8202.10.00.00 |
Declare as "Knife" or "Scissor" β Wrong Chapter |
π Note:
- "Saw Blade" includes toothless blades used for slitting or slotting.
- "Parts" refers to non-cutting components.
β 3. Special Circumstances
| Situation | Handling Advice |
|---|---|
| Bi-Metal Blades | Still classified under 8202.10.00.00. The material (steel vs. tungsten carbide) does not change the HS Code for general saw blades. |
| Custom Blades | Provide customer order + design specs. If it's a non-standard slotting blade, it still falls under 8202.10.00.00. |
| Kit Imports (Handle + Blade) | Declare Separately! Do not combine into one line item. Declare blades under 8202.10.00.00 and handles under 8202.99.00.00. |
| Non-Chinese Origin | If the blade is made in Vietnam, Germany, or USA, no 25% Section 301 duty applies. Only the 0% base duty. |
π V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Notes |
|---|---|---|---|
| πΊπΈ USA | 8202.10.00.00 |
25% (Total) | Base 0% + 25% Section 301 |
| π¨π³ China | 8202.10.00.00 |
~10-15% | Import duty applies, but no Section 301 |
| πͺπΊ EU | 8202.10.00.00 |
~2.5-6% | No additional punitive tariffs |
| π¬π§ UK | 8202.10.00.00 |
~2.5-6% | Post-Brexit tariff schedule |
| π¨π¦ Canada | 8202.10.00.00 |
~2.5-6% | USMCA may apply for US-origin goods |
π Conclusion:
- The US market is the most expensive for Chinese-manufactured saw blades due to the 25% Section 301 tariff.
- Europe and Asia have significantly lower tariffs, making them more attractive for high-volume tool accessories.
π VI. Common Errors & Pitfall Avoidance (Lessons Learned)
β Error 1: Declaring "Saw Blades" as "Kitchen Knives" or "Shears"
π Consequence: HS Code mismatch β Rejection by Customs β Delays & Fines
β Error 2: Combining "Handles" and "Blades" into one line item labeled "Saw Parts"
π Consequence: Customs may assign the highest applicable tariff or reject the entry for lack of clarity. Declare separately!
β Error 3: Ignoring the "Toothless" classification
π Consequence: Slotting blades are still saw blades. If declared as "tools," you risk misclassification.
β Error 4: Assuming all "Tool Accessories" are taxed equally
π Consequence: Blurring the line between "blade" (8202.10) and "part" (8202.99) leads to incorrect duty calculations.
β Correct Practice:
"Bi-Metal Saw Blade, 10-inch, 24 TPI, for Wood Cutting, Model XYZ, Made in China"
π― VII. Conclusion: Precision in Classification Saves Money!
π― Remember the Mantra:
πΉ "Blades go to 8202.10, Parts go to 8202.99."
πΉ "25% Tax is the Rule for Chinese Origins in the US."
πΉ "Declare Separately, Avoid Delays, Stay Compliant!"
π Pro Tip:
If your saw blades are originally manufactured in Vietnam, Thailand, or Malaysia, they are exempt from the 25% Section 301 tariff. Ensure your Certificate of Origin clearly states the non-Chinese origin to save 25% on every shipment.
Consider applying for an Advance Ruling from US Customs if you have complex multi-component saw kits.
π£ Take Action Now:
π Contact a licensed Customs Broker + Provide Product Specs + Verify Country of Origin
π Ensure your saw blade accessories clear US Customs smoothly and cost-effectively!
β¨ Professional Customs Clearance Starts with Accurate Classification!
πΌ Every Percent of Duty Matters in Global Trade!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.