Shirt Accessories
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 6217108500 | 24.6% | CN | US | Official Doc |
| 7117909000 | 28.5% | CN | US | Official Doc |
| 6217109550 | 32.1% | CN | US | Official Doc |
| 6117809570 | 32.1% | CN | US | Official Doc |
| 6117909095 | 32.1% | CN | US | Official Doc |
Product Images
AI Analysis
𧡠Shirt Accessories (Clothing Fasteners & Ornaments)
π HS Code Reference & Clearance Guide | 2026 Latest Tariff Breakdown | Professional Entry Strategy
π I. Product Definition & Classification: Do You Really Know "Shirt Accessories"?
Shirt Accessories encompass a wide range of non-structural components used to finish, decorate, or fasten garments (shirts, blouses, tunics). These items are not the main garment body but are essential for functionality and aesthetics.
They are broadly categorized into: * Functional Fasteners: Buttons, snaps, zippers, eyelets, hooks, and shanks. * Decorative Ornaments: Embellishments, embroidery patches, labels, and non-precious metal trims. * Material Basis: The HS Code classification heavily depends on whether the item is made of plastic, textiles (non-knitted/woven), base metals, or non-precious metals.
β οΈ Critical Classification Logic:
- If Material is Undefined in the description, Customs often applies a "Residual/Other" (ε εΊ) principle, leading to higher duty rates due to uncertainty.
- Plastic/Textile parts generally fall under Chapter 61 or 62.
- Metal/Non-precious metal parts may fall under Chapter 71 or specific textile accessory codes.
π¦ II. HS Code Classification Breakdown (2026 Latest Tariff Authority)
Based on the provided data, here is the precise mapping for Shirt Accessories when material details are vague or specific:
| HS Code | Product Description | Applicable Scenario | Material Logic (Inferred) |
|---|---|---|---|
6217.10.85.00 |
Garment Accessories: Matching garment attachments, classified under "Other" when material is undefined. | General buttons, hooks, and trims for non-knitted shirts where material isn't explicitly stated. | Residual Category: Non-specific material (Default "Other"). |
7117.90.90.00 |
Imitation Jewelry / Accessories: Non-precious metal decorative items based on residual principles. | Non-precious metal buttons, chains, badges, or ornamental trims (e.g., brass, alloy). | Non-precious Metal: Infers decorative metal parts not covered by precious metal codes. |
6217.10.95.50 |
Garment Accessories: Fully matching "Clothing Accessories" with undefined material, classified as "Other". | Complete sets of accessories for shirts where the specific fabric/metal composition is missing. | Residual Category: Matches "clothing accessories" but defaults to "Other" due to lack of material specificity. |
6117.80.95.70 |
Garment Accessories: Matches clothing attachments, defaults to non-cotton/non-wool material accessories. | Accessories for non-knitted or synthetic/blend shirt materials (e.g., polyester, linen, synthetic trims). | Non-Cotton/Non-Wool: Defaults to accessory category excluding standard cotton/wool textile fibers. |
6117.90.90.95 |
Garment Accessories: Consistent with clothing accessories and parts, classified under residual accessory principles. | Spare parts or loose accessories (tags, linings, small trimmings) for knit shirts or specific garment types. | Residual Accessory: Applies the principle of "Accessories & Parts" as a catch-all. |
π Key Insight:
- The "Total Tax" rates vary significantly (24.6% to 32.1%) because Undefined Materials trigger Residual Classifications.
-7117.90.90.00(Metal) has the lowest Base Tax (11.0%) but a higher Additional Tax (7.5%) compared to textile-based codes, yet the overall burden differs.
-6217.10.95.50and6117.80.95.70carry the highest base tax (14.6%) due to the "Residual" classification logic.
π° III. 2026 Latest Tariff Rate Breakdown (Detailed Analysis)
β Applicable Market: United States (US)
β Origin: China (CN)
β Effective Date: 2025-11-10 (Including subsequent imports)
β Tax Structure: Base Tariff + Section 301 (Additional) + Section 122 (Additional)
π― 1. Code 6217.10.85.00 β Garment Accessories (Residual Material)
| Item | Content |
|---|---|
| Base Tariff | 14.6% |
| Section 301 (Additional) | 0.0% (Note: Specific code exclusion) |
| Section 122 Tariff | +10.0% (Targeted China import tax) |
| Total Tax Rate | 24.6% |
| Tax Calculation | CIF Value Γ 24.6% |
| De Minimis Exemption | β Not Eligible |
π Explanation:
- 14.6% Base: Standard MFN rate for textile accessories.
- 0% Additional: No Section 301 penalty applies to this specific residual code.
- 10% Section 122: Mandatory surcharge on Chinese-origin goods under specific trade actions.
- Result: 24.6% is the lowest total rate in this dataset, making it the most cost-effective if the item can be classified here.
π― 2. Code 7117.90.90.00 β Non-Precious Metal Accessories
| Item | Content |
|---|---|
| Base Tariff | 11.0% |
| Section 301 (Additional) | +7.5% |
| Section 122 Tariff | +10.0% |
| Total Tax Rate | 28.5% |
| Tax Calculation | CIF Value Γ 28.5% |
| De Minimis Exemption | β Not Eligible |
π Explanation:
- 11.0% Base: Lower base rate for metal/imitation jewelry.
- 7.5% Additional: Section 301 surcharge applies to metal accessories from China.
- 10% Section 122: Standard surcharge.
- Result: 28.5% total. Despite a lower base rate, the Section 301 tax pushes the total higher than6217.10.85.00.
π― 3. Codes 6217.10.95.50, 6117.80.95.70, 6117.90.90.95 β High-Risk Residual Categories
(All three codes share identical tax structures)
| Item | Content |
|---|---|
| Base Tariff | 14.6% |
| Section 301 (Additional) | +7.5% |
| Section 122 Tariff | +10.0% |
| Total Tax Rate | 32.1% |
| Tax Calculation | CIF Value Γ 32.1% |
| De Minimis Exemption | β Not Eligible |
π Explanation:
- 14.6% Base: High base rate for "Other" textile accessories.
- 7.5% Additional: Section 301 applies to these residual textile codes.
- 10% Section 122: Mandatory surcharge.
- Result: 32.1% total. This is the highest cost scenario, occurring when material definitions are too vague, forcing Customs to use the most punitive "Other" subheadings.
π οΈ IV. Clearance Practical Advice (Pitfall Avoidance Guide)
β 1. Preparation Checklist (Must-Have Documents)
| Document | Required? | Why it Matters |
|---|---|---|
| β Detailed Product Specification | YES | Must explicitly state Material Composition (e.g., "100% Polyester Buttons", "Alloy Zippers"). |
| β Material Certificate | YES | Proves material type to avoid "Residual" classification (95.x codes). |
| β Product Photos (Close-up) | YES | Must show texture, logo, and fastening mechanism to confirm function. |
| β Commercial Invoice | YES | Must use precise terms like "Plastic Buttons" or "Metal Ornaments," NOT just "Accessories." |
| β Packing List | YES | Clearly separate "Garments" from "Loose Accessories" if they differ in HS Codes. |
β 2. Declaration Strategy (Key Mantra)
π₯ "Define Material, Avoid Residual, Lower Tax by 5%!"
| Scenario | Correct Declaration | Wrong Declaration | Consequence |
|---|---|---|---|
| Material Unknown | 6217.10.85.00 (If plausible) |
6217.10.95.50 (Residual) |
Tax jump from 24.6% to 32.1% |
| Metal Buttons | 7117.90.90.00 |
6117.90.90.95 (Textile category) |
Wrong classification + Potential Audit |
| Mixed Materials | Split Declaration (One for Metal, One for Textile) | Mixed in one line | Customs Rejection / Delay |
| Generic Term | "Polyester Trim" | "Shirt Accessories" | High Risk of "Residual" Code |
β 3. Special Handling Tips
| Situation | Action Plan |
|---|---|
| Vague Supplier Description | Demand a material breakdown before shipment. If unavailable, test samples to identify composition. |
| Mixed Shipments (Garments + Accessories) | Ensure the accessory HS Code is declared on a separate line item to avoid blending tax rates. |
| High-Volume Imports | Apply for Advance Ruling on the specific "Residual" codes to lock in the 24.6% rate if possible. |
| Section 122 Compliance | Ensure all products are marked "Made in China" clearly to verify eligibility for the 10% surcharge (or avoid it if re-exported). |
π V. Global Market Comparison (2026 Context)
| Region | Preferred HS Code (If Material Defined) | Est. Tariff (CN Origin) | Key Risk |
|---|---|---|---|
| πΊπΈ USA | 6217.10.85.00 (Best) |
24.6% | Residual codes (95.x) spike to 32.1% |
| πͺπΊ EU | 6217.10.80.00 (Typical) |
~4-5% | No Section 301/122, but strict material rules |
| π¨π¦ Canada | 6217.10.00.00 |
~3-5% | CETA agreement may reduce duties if non-CN |
| π―π΅ Japan | 6217.10.90.00 |
~4-5% | Strict material verification |
π Conclusion:
- USA is the most critical market due to the Section 122 (10%) and Section 301 (7.5%)ε ε (stacking).
- Material Clarity is King: A missing material spec can increase your duty burden by 30%+ (from 24.6% to 32.1%).
π VI. Common Mistakes & Lessons Learned
β Mistake 1: Using generic terms like "Garment Accessories" without material details.
π Result: Customs assigns Residual Code (95.50 or 95.70) β Tax 32.1% (Loss of 7.5% potential savings).
β Mistake 2: Declaring metal buttons as textile accessories (6117.x).
π Result: Classification Error β Fine + Seizure + Back Tax.
β Mistake 3: Ignoring Section 122 Tariff.
π Result: Unexpected 10% surcharge applied at port, disrupting cash flow.
β Correct Approach:
"Plastic Shanks & Buttons, 10mm, for Shirts, Material: ABS Plastic, Origin: China"
β Target HS:6217.10.85.00β Tax: 24.6%
π― VII. Conclusion: Precision Saves Profits!
π― Remember the Mantra:
πΉ "Material Matters, Residual is Ruin."
πΉ "24.6% is the Goal, 32.1% is the Pitfall."
πΉ "Define, Specify, Save!"
π Pro Tip:
If your shirt accessories are Plastic, try to argue for 6217.10.85.00 to avoid the 7.5% Section 301 tax. If they are Metal, accept 7117.90.90.00 but calculate the 7.5% impact. Never leave the material undefined!
π£ Immediate Action:
π Audit your Bill of Materials (BOM) today.
π Update your Invoice Descriptions to include Material Composition.
π Lock in the 24.6% rate and avoid the 32.1% penalty!
β¨ Smart Classification = Smart Profit!
πΌ Don't let a missing word cost you 7.5% of your margin!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.