Sieve
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 7323915040 | 15.3% | CN | US | Official Doc |
AI Analysis
π΄ Sieve & Strainer (Kitchen/Tableware Articles)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
π I. Product Definition & Classification: Do You Really Understand "Sieve"?
In the world of kitchenware and household articles, a "Sieve" (often referred to as a strainer, colander, or mesh tool) is a device used to separate solids from liquids or to remove fine particles. In international trade, it is broadly categorized under Chapter 73 (Articles of Iron or Steel), specifically within Heading 73.23.
However, the classification hinges on two critical factors: 1. Material Composition: Is it Cast Iron or Wrought Iron/Steel? 2. Finish: Is it Enamelled or Not Enamelled?
β οΈ Key Distinction:
- If the sieve is made of Iron (other than cast iron) or Steel AND is Enamelled β It falls under 7323.91.50.40.
- If the sieve is made of Cast Iron AND is Not Enamelled β It falls under a different subheading (e.g., 7323.94.00.80 or similar, depending on specific national breakdowns).
- Note: The provided DATA focuses specifically on the Enamelled Iron/Steel category.
π¦ II. HS Code Classification Details (Based on Provided Data)
| HS Code | Product Description | Material | Finish | Tax Rate (Total) |
|---|---|---|---|---|
7323.91.50.40 |
Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel: Other: Of iron (other than cast iron) or steel, enameled | Iron (Non-Cast) or Steel | Enamelled | 5.3% |
π Critical Note on the Provided Data:
The provided JSON data explicitly links HS Code7323.91.50.40to "Of iron (other than cast iron) or steel, enameled".
It also lists7323.94.00.80as "Of cast iron, not enameled".
Therefore, for a standard kitchen Sieve/Strainer: - If your sieve is enamel-coated stainless steel or iron: Use7323.91.50.40. - If your sieve is bare cast iron (rare for sieves, more common for skillets): Use7323.94.00.80.
π° III. 2026 Latest Tariff Rate Breakdown (Detailed Tax Clauses)
β Applicable Country: United States (US)
β Origin: China (CN) (Assumed based on typical tariff structures mentioned in previous contexts, but verify if origin differs)
β HS Code:7323.91.50.40
β Product: Enamelled Iron/Steel Household Articles (Sieve/Strainer)
π― 1. Tariff Structure for 7323.91.50.40
| Item | Content |
|---|---|
| Base Tariff Rate | 5.3% (Ad Valorem) |
| Section 301 Additional Tariff | 0.0% |
| IEEPA Additional Tariff | 0.0% |
| Total Effective Tax Rate | 5.3% |
| Tax Calculation | CIF Value Γ 5.3% |
| De Minimis Eligibility | β Yes (If value β€ $800, entry may be exempt from duties under 50 U.S.C. Β§ 1702; however, this depends on current CBP enforcement policies for de minimis shipments) |
| Legal Basis | HTSUS 7323.91.50.40 |
π Explanation:
- Base Rate (5.3%): This is the standard Most Favored Nation (MFN) duty rate for enamelled iron/steel kitchenware. - No Section 301/IEEPA Surcharge: Unlike electronics, steel, or aluminum products, many finished kitchenware items in this specific subheading do not currently attract the additional 25% (Section 301) or 10% (IEEPA) tariffs, provided they are correctly classified under 7323.91.
- β οΈ Verification Required: Always double-check with a licensed customs broker, as tariff landscapes can shift. The provided data explicitly states "Additional Tariff: 0.0%".
π οΈ IV. Customs Clearance Practical Advice (Real-World Pitfall Guide)
β 1. Documentation Checklist (Non-Negotiable)
| Document | Required? | Purpose |
|---|---|---|
| β Commercial Invoice | βοΈ | Must clearly state: "Enamelled Iron/Steel Kitchen Sieve" |
| β Packing List | βοΈ | Include net/gross weight, dimensions |
| β Product Photos | βοΈ | Show the enamel finish (glossy/coated surface) vs. bare metal |
| β Material Declaration | βοΈ | Confirm material is Iron (non-cast) or Steel, NOT Aluminum, Plastic, or Wood |
| β MFN Certificate | βοΈ | To prove eligibility for base rate |
β 2. Declaration Tips (Key Mantra)
π₯ βEnamel is Key, Material Must Be Clear! Donβt Mix Cast Iron with Wrought Steel!β
| Scenario | Correct Declaration | Incorrect Action |
|---|---|---|
| Enamelled Steel Sieve | 7323.91.50.40 β "Enamelled Steel Kitchen Sieve" |
Misclassifying as "Cast Iron" (7323.94) β Potential penalty |
| Bare Cast Iron Skillet | 7323.94.00.80 β "Cast Iron Cookware" |
Declaring as "Steel" β Wrong duty rate |
| Plastic Sieve | 3924.10 (Plates, etc.) |
Declaring as Iron/Steel β Severe Penalty |
| Stainless Steel Sieve (Non-Enamelled) | Check 7323.93 or 7323.99 | Assuming all steel is 7323.91 β Wrong Code |
π Crucial Distinction:
- Stainless Steel is often classified under 7323.93 (Enamelled) or 7323.99 (Other).
- 7323.91 specifically refers to Iron (other than cast iron) or Steel that is Enamelled.
- If your sieve is Stainless Steel and NOT Enamelled (just polished metal), it likely falls under 7323.99 or 7323.93, depending on the specific HTSUS breakdown.
- The provided data ONLY covers7323.91.50.40(Enamelled Iron/Steel). If your product is Stainless Steel, you must verify if it qualifies as "Enamelled" (it usually doesnβt) or if it falls under a different subheading.
β 3. Special Cases
| Scenario | Handling Advice |
|---|---|
| Stainless Steel Sieve | Do NOT use 7323.91.50.40 unless it is explicitly enamelled. Stainless steel is typically 7323.93 (Enamelled) or 7323.99 (Other). Check with a broker. |
| Aluminum Sieve | Incorrectly declared as Iron/Steel β Seizure Risk. Use Chapter 76. |
| Combined Sets (Sieve + Bowl) | Declare as a set under the principal item. If the sieve is the main function, use its HS Code. |
π V. Global Market Comparison (2026)
| Country/Region | Recommended HS Code | Duty Rate | Notes |
|---|---|---|---|
| πΊπΈ USA | 7323.91.50.40 |
5.3% | No additional tariffs for this specific code |
| π¨π³ China | 7323.91.50.40 |
~5-13% | Varies by trade agreement |
| πͺπΊ EU | 7323.91 |
~4-5% | CE marking required if applicable |
| π¬π§ UK | 7323.91 |
~4-5% | Post-Brexit rules apply |
π Conclusion:
The US duty rate of 5.3% for Enamelled Iron/Steel kitchenware is relatively low compared to electronics or machinery. However, misclassification is the biggest risk. Ensure your product is truly Enamelled and Not Cast Iron.
π VI. Common Mistakes & Pitfalls (Lessons Learned)
β Mistake 1: Declaring a Stainless Steel sieve as 7323.91.50.40
π Result: Customs may reject the code, leading to reclassification under 7323.93 or 7323.99, potentially altering duty rates or triggering additional scrutiny.
β Mistake 2: Not distinguishing between Cast Iron and Wrought Iron/Steel
π Result: Using 7323.94.00.80 (Cast Iron) for a steel sieve is incorrect. Cast iron is brittle and heavy; wrought steel is ductile. Material science matters!
β Mistake 3: Ignoring the "Enamelled" requirement
π Result: If the sieve is bare steel (polished, not enamelled), it does NOT qualify for 7323.91. It likely falls under 7323.99 (Other articles), which may have different duty rates.
β Correct Practice:
"Stainless Steel Kitchen Strainer, Non-Enamelled, Model XYZ" β Check HS Code 7323.93/99
"Enamelled Iron Kitchen Sieve, Red Coating, Model ABC" β Use HS Code 7323.91.50.40
π― VII. Conclusion: Precision in Classification Saves Money!
π― Remember:
πΉ "Enamelled = 7323.91"
πΉ "Cast Iron = 7323.94"
πΉ "Bare Steel = 7323.93/99"
πΉ "Always Verify Material & Finish!"
π Pro Tip:
If you are importing Stainless Steel sieves, do NOT assume they fall under 7323.91. Stainless steel is often classified differently. Consult a customs broker to determine if your stainless steel product is considered "Enamelled" (unlikely) or falls under 7323.93 or 7323.99.
π£ Immediate Action:
π Contact a licensed customs broker to verify the HS Code for your specific material (Iron vs. Steel vs. Stainless) and finish (Enamelled vs. Bare).
π Accurate classification ensures smooth clearance and optimal duty rates!
β¨ Professional Customs Clearance Starts with Accurate Classification!
πΌ Your Duty Cost is Directly Linked to Your HS Code!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.