Simulated Vine
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 4602124500 | 41.6% | CN | US | Official Doc |
| 3926903500 | 16.5% | CN | US | Official Doc |
| 3926909989 | 22.8% | CN | US | Official Doc |
Product Images
AI Analysis
πΏ Simulated Vine (Faux Rattan/Wicker)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Strategy for Synthetic Decor
π 1. Product Definition: What is "Simulated Vine"?
"Simulated Vine" refers to artificial rattan or wicker products made from synthetic materials (primarily plastics or composite fibers) that mimic the appearance and texture of natural vines or rattan. These are widely used in furniture, garden decorations, baskets, and interior design.
In international trade, the classification depends heavily on the material composition (plastic vs. other woven materials) and the form (finished article vs. raw material). Below is the breakdown based on the provided data.
π¦ 2. HS Code Classification Details (2026 Authoritative Mapping)
| HS Code | Product Description | Material & Form | Total Tax Rate | Key Classification Logic |
|---|---|---|---|---|
| 4602.12.45.00 | Woven Articles of Plaiting Materials | Simulated vine material (synthetic mimicry), classified as "other woven articles." | 41.6% | Base: 6.6% Add-on: 25.0% Section 122: 10% |
| 3926.90.35.00 | Other Plastic Articles (Decorative) | Plastic material, decorative form, classified as "other plastic articles." | 16.5% | Base: 6.5% Add-on: 0.0% Section 122: 10% |
| 3926.90.99.89 | Other Plastic Articles (Unclassified) | Plastic material, not specified in other subheadings, classified as "other articles of plastics." | 22.8% | Base: 5.3% Add-on: 7.5% Section 122: 10% |
π Critical Distinction:
- If the product is considered a woven article (even if made of synthetic "simulated" material), it falls under 4602.
- If the product is considered a general plastic article (molded, extruded, or not primarily defined as "woven" in the specific subheading), it falls under 3926.
- The tax burden varies significantly: 41.6% (Woven) vs. 16.5% or 22.8% (Plastic Articles).
π° 3. 2026 Latest Tariff Rate Breakdown (Including Additional Duties)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Time: 2025/2026 Period (Post-2025 Policies)
π― 1. 4602.12.45.00 ββ Woven Articles (Simulated Vine as "Woven Product")
| Item | Content |
|---|---|
| Base Rate | 6.6% |
| USITC Add-on (Section 301) | +25.0% |
| Section 122 Duty | +10.0% |
| Total Tax Rate | 41.6% |
| Tax Calculation | CIF Value Γ 41.6% |
| De Minimis Exemption | β Not Eligible (High tariff rate exceeds threshold for Section 321 relief) |
| Legal Basis | HTSUS 4602.12.45.00 + USITC Footnote (301) + Section 122 Directive |
π Explanation:
- The 25% additional tariff is under the U.S. Trade Act Section 301 (China-specific).
- The 10% is under Section 122 (a specific legislative add-on for certain goods).
- Total: 41.6%. This is a high-cost category. Misclassification here can lead to significant cost increases.
π― 2. 3926.90.35.00 ββ Plastic Articles (Decorative)
| Item | Content |
|---|---|
| Base Rate | 6.5% |
| USITC Add-on (Section 301) | 0.0% (Specific exemption or lower bracket) |
| Section 122 Duty | +10.0% |
| Total Tax Rate | 16.5% |
| Tax Calculation | CIF Value Γ 16.5% |
| De Minimis Exemption | β Not Eligible (Still subject to duties) |
| Legal Basis | HTSUS 3926.90.35.00 + Section 122 Directive |
π Explanation:
- This is the most tax-efficient option if the product qualifies as a "decorative plastic article."
- The 25% Section 301 tariff does NOT apply to this specific subheading (or is at a different rate), resulting in a much lower total duty.
- Key Advantage: 16.5% vs. 41.6%.
π― 3. 3926.90.99.89 ββ Other Plastic Articles (Unclassified)
| Item | Content |
|---|---|
| Base Rate | 5.3% |
| USITC Add-on (Section 301) | +7.5% |
| Section 122 Duty | +10.0% |
| Total Tax Rate | 22.8% |
| Tax Calculation | CIF Value Γ 22.8% |
| De Minimis Exemption | β Not Eligible |
| Legal Basis | HTSUS 3926.90.99.89 + USITC Footnote + Section 122 |
π Explanation:
- This is a catch-all category for plastic articles not specified elsewhere.
- It incurs a 7.5% Section 301 tariff (lower than the 25% in 4602).
- Total: 22.8%. It is cheaper than 4602 but more expensive than 3926.90.35.00.
π οΈ 4. Customs Clearance Practical Advice (Avoid Pitfalls)
β 1. Documentation Checklist (Essential)
| Document | Must Provide | Notes |
|---|---|---|
| Product Specification Sheet | βοΈ | Must clearly state: Material (e.g., "HDPE Plastic"), Method (Woven vs. Molded). |
| Photos (Clear & Detailed) | βοΈ | Show texture, joints, and whether it looks like natural rattan. |
| Commercial Invoice | βοΈ | Describe as "Synthetic Wicker Furniture" or "Plastic Decorative Vine," not just "Vine." |
| Origin Certificate | βοΈ | Confirm China origin to apply correct additional duties. |
| Material Composition Proof | βοΈ | Lab report confirming 100% plastic/synthetic vs. natural fiber blend. |
β 2. Declaration Strategy (Key Mnemonic)
π₯ "Material Dictates Code, Form Defines Duty!"
| Scenario | Correct HS Code | Tax Rate | Risk if Misclassified |
|---|---|---|---|
| Woven Simulated Vine (Looks like woven basket/chair) | 4602.12.45.00 |
41.6% | High cost. If declared as plastic, you may face penalties for undervaluation. |
| Molded/Extruded Decorative Vine (Solid plastic, shaped like vine) | 3926.90.35.00 |
16.5% | Optimal. Must prove it's not "woven" in the traditional sense. |
| Generic Plastic Vine (No specific category) | 3926.90.99.89 |
22.8% | Moderate. Use if 3926.90.35.00 doesn't fit the exact description. |
π Critical Tip:
- If your product is woven (interlaced strands), Customs may insist on 4602 (41.6%).
- If your product is molded or extruded and merely shaped to look like vines, argue for 3926 (16.5%).
- Do NOT declare as "Natural Rattan" (different HS code) unless it actually is natural.
β 3. Special Cases
| Case | Handling Advice |
|---|---|
| Mixed Materials (Plastic + Natural Fiber) | If >50% plastic, argue for 3926. If >50% natural, it may fall outside this data set (potentially higher duty). |
| Furniture vs. Decor | If it's a chair/table, it might be classified as furniture (8708/9403), not vine. Check if "Simulated Vine" is just a part. |
| Section 122 Exemptions | Check if any Section 122 exemptions apply to your specific product type in 2026. |
π 5. Global Market Comparison (2026)
| Region | Recommended HS Code | Estimated Total Duty | Notes |
|---|---|---|---|
| πΊπΈ USA | 3926.90.35.00 |
16.5% | Best option if product allows. |
| πΊπΈ USA | 4602.12.45.00 |
41.6% | High risk if not strictly "woven." |
| πͺπΊ EU | 4602.11.00 |
~5-10% | EU tariffs generally lower; no Section 122. |
| π¨π³ China | 4602.12.00 |
~5-10% | Import duty into China is lower. |
π Conclusion:
- USA is the most challenging market due to Section 301 and Section 122 duties.
- Strategy: Optimize product design/documentation to qualify for 3926.90.35.00 (16.5%) rather than 4602.12.45.00 (41.6%).
π 6. Common Errors & Pitfalls (Lessons Learned)
β Error 1: Declaring "Simulated Vine" as "Natural Rattan"
π Consequence: Customs inspection reveals synthetic material β Penalty + Back Taxes + Possible Fraud Charge.
β Error 2: Using 4602 for a molded plastic product
π Consequence: Paying 41.6% instead of 16.5% β 25% unnecessary cost increase.
β Error 3: Ignoring Section 122 (10%)
π Consequence: Underestimating total landed cost β Profit Margin Erosion.
β Correct Action:
Description: "Artificial Wicker, 100% HDPE Plastic, Molded to resemble woven vine, for Outdoor Decor."
HS Code:3926.90.35.00
Why: Emphasizes "Plastic" and "Molded" to avoid "Woven" classification.
π― 7. Conclusion: Smart Classification Saves Money!
π― Remember the Formula:
πΉ "Woven = 41.6% | Molded Plastic = 16.5% | Don't Guess, Specify!"
πΉ "Section 122 adds 10% to everything. Plan for it!"
π Pro Tip:
- Request a Pre-Ruling from CBP (Customs and Border Protection) before shipment if unsure.
- Ensure your supplier provides a Material Safety Data Sheet (MSDS) to prove plastic composition.
π£ Act Now:
π Consult a Customs Broker + Provide Material Proof + Optimize for
3926.90.35.00
π Maximize Profit, Minimize Duty, Ensure Compliance!
β¨ Professional Customs Clearance Starts with Accurate Classification!
πΌ Every Percent of Duty Saved is Pure Profit!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.