Special Structure Copolymer Material
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3914006000 | 38.9% | CN | US | Official Doc |
| 3914002000 | 35.0% | CN | US | Official Doc |
| 3907995050 | 41.5% | CN | US | Official Doc |
| 3902300000 | 41.5% | CN | US | Official Doc |
| 3902900050 | 41.5% | CN | US | Official Doc |
Product Images
AI Analysis
π§ͺ Special Structure Copolymer Material (Polymer Raw Materials)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Compliance Strategy
π I. Product Definition & Classification: What is "Special Structure Copolymer"?
"Special Structure Copolymer Material" refers to primary form polymers composed of two or more different monomer units arranged in a specific architectural pattern (e.g., block, graft, alternating, or random copolymers). These materials are engineered for enhanced mechanical, thermal, or chemical resistance compared to homopolymers.
In international trade, the classification hinges on three critical factors: 1. Chemical Composition: Is it an Olefin polymer (e.g., Polyethylene, Polypropylene), Polyester, or another polymer type? 2. Physical Form: Is it in "primary form" (granules, powders, liquids, masses) or processed? (Note: All codes in DATA are primary forms). 3. Specific Subheading: Does it fall under a specific "Other" category or a general residual category?
β οΈ Key Distinction Point:
- Olefin Copolymers (Ethylene/Propylene based) β Typically Chapter 3902;
- Polyester Copolymers β Typically Chapter 3907;
- Other Polymers (Acrylics, Vinyl, etc.) β Typically Chapter 3914 (if classified as "Other polymers" in specific national nomenclatures) or general residual codes.
(Note: The provided DATA suggests specific national tariff lines, likely US HTSUS, where 3914 may refer to specific other polymers or a specific sub-category depending on the exact chemical nature not fully detailed in the summary. We strictly follow the provided DATA summaries.)
π¦ II. HS Code Classification Details (2026 Latest Tariff Alignment)
Based on the provided data, here is the breakdown of the 5 specific HS Codes associated with "Special Structure Copolymer Material":
| HS Code | Summary Description (from DATA) | Chemical Category | Primary Form? |
|---|---|---|---|
3914.00.60.00 |
Special structure copolymer, polymeric material, primary form, falls under "other" category. | Other Polymers (Residual/Specific) | β Yes |
3914.00.20.00 |
Special structure copolymer, polymeric material, primary form features, no conflict. | Other Polymers (Specific) | β Yes |
3907.99.50.50 |
Special structure copolymer, Polyesters/Polymer category, primary form raw material features. | Polyesters | β Yes |
3902.30.00.00 |
Special structure copolymer, Olefin Copolymers, primary form features. | Olefins | β Yes |
3902.90.00.50 |
Special structure copolymer, Propylene or other olefin polymers, primary form features. | Olefins (Other) | β Yes |
π Critical Note:
- 3902 series = Olefins (Ethylene, Propylene, etc.).
- 3907 series = Polyesters (PET, PBT, etc.).
- 3914 series = Other Polymers (This chapter often captures polymers not elsewhere specified or specific national sub-categorizations for "other" resins).
- Do not mix these categories. Misclassifying an Olefin copolymer (3902) as an "Other polymer" (3914) can lead to significant tariff discrepancies or compliance audits.
π° III. 2026 Latest Tariff Rate Breakdown (Including Surtaxes & Policy Add-ons)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Date: 2025/2026 Period (Including subsequent imports)
π― 1. 3914.00.60.00 & 3914.00.20.00 ββ "Other" Polymers (Residual/Specific)
| Item | Detail |
|---|---|
| Product Scope | Special structure copolymers falling under Chapter 3914 (Other polymers). |
| Basic Tariff | 3914.00.60.00: 3.9% 3914.00.20.00: 0.0% |
| USITC Surcharge (Section 301) | +25.0% (Applied to Chinese origin goods) |
| IEEPA Surcharge (Section 122/Other) | +10.0% (Specific 122 Clause Tariff as per DATA) |
| Total Tariff Rate | 3914.00.60.00: 38.9% 3914.00.20.00: 35.0% |
| Tax Calculation | CIF Value Γ Total Rate |
| De Minimis Exemption | β Not Eligible (Section 301 & IEEPA tariffs generally deny de minimis for high-value industrial materials) |
| Legal Basis Path | HTSUS:3914 β Section 301 (USITC Footnote) β IEEPA:9903.01.25 (10% Clause) |
π Explanation:
- The 0% vs 3.9% base rate difference is crucial. If your copolymer fits the specific definition for3914.00.20.00, you save 3.9% on the base duty alone.
- However, both are subject to the 35-38.9% effective rate due to geopolitical surcharges.
- Warning: "122 Clause" typically refers to specific anti-dumping or countervailing duty contexts, or specific statutory provisions. Ensure your product does not fall under specific anti-dumping orders for certain acrylonitrile-butadiene-styrene (ABS) or similar polymers which might have higher duties.
π― 2. 3907.99.50.50 ββ Polyesters (Other)
| Item | Detail |
|---|---|
| Product Scope | Special structure copolymer, Polyester type, primary form. |
| Basic Tariff | 6.5% |
| USITC Surcharge (Section 301) | +25.0% |
| IEEPA Surcharge | +10.0% |
| Total Tariff Rate | 41.5% |
| Tax Calculation | CIF Value Γ 41.5% |
| De Minimis Exemption | β Not Eligible |
| Legal Basis Path | HTSUS:3907 β Section 301 β IEEPA |
π Explanation:
- Polyester copolymers (e.g., copolyesters of PET) carry a higher base duty (6.5%) than the 0% base for some olefin/other polymers.
- Total cost impact is 41.5%, making it slightly more expensive than the 3914 category.
- Compliance Tip: Ensure the "Polyester" designation is chemically accurate. If itβs actually a polyolefin, misclassification here could lead to penalties.
π― 3. 3902.30.00.00 & 3902.90.00.50 ββ Olefin Copolymers
| Item | Detail |
|---|---|
| Product Scope | Special structure copolymer, Olefin type (Propylene/Ethylene based), primary form. |
| Basic Tariff | 6.5% |
| USITC Surcharge (Section 301) | +25.0% |
| IEEPA Surcharge | +10.0% |
| Total Tariff Rate | 41.5% |
| Tax Calculation | CIF Value Γ 41.5% |
| De Minimis Exemption | β Not Eligible |
| Legal Basis Path | HTSUS:3902 β Section 301 β IEEPA |
π Explanation:
- 3902.30 is typically for Ethylene Polymers (copolymerized with other olefins).
- 3902.90 is for Other Olefin Polymers (e.g., Propylene copolymers, Isobutylene).
- Both fall under the same 41.5% total rate.
- Optimization Opportunity: If your product is chemically a copolymer that fits the specific "Other" category in 3914 (e.g., certain acrylics or vinyls), it might qualify for the lower base rate (0% or 3.9%). However, if it is strictly an Olefin or Polyester, you cannot switch to 3914 to save tax; it must be classified correctly by chemistry.
π οΈ IV. Customs Clearance Practical Advice (Pitfall Avoidance Guide)
β 1. Documentation Checklist (Non-negotiable)
| Document | Required? | Explanation |
|---|---|---|
| β Product Specification Sheet | βοΈ | Must explicitly state: "Copolymer," "Primary Form (Granules/Powder)," and Chemical Composition (e.g., "Ethylene-Propylene Copolymer"). |
| β Safety Data Sheet (SDS) | βοΈ | Section 3 must list chemical identity. HS 3902/3907/3914 distinctions rely heavily on this. |
| β Certificate of Origin (CO) | βοΈ | Essential for determining applicability of USITC/IEEPA surcharges. |
| β Commercial Invoice | βοΈ | Must clearly describe goods as "Polymer Resin, Primary Form, [Specific Type]." Avoid vague terms like "Plastic Material." |
| β Manufacturing Process Description | βοΈ | If challenged, prove it is a "Copolymer" (two monomers) vs. a "Blend" (mixture). Blends may have different classification rules. |
β 2. Declaration Tips (Key Mantras)
π₯ βForm is Primary, Chemistry is King, Code is Specific, Tax is High!β
| Scenario | Correct Declaration | Incorrect Declaration | Risk |
|---|---|---|---|
| Olefin Copolymer | 3902.30.00.00 or 3902.90.00.50 |
"Plastic Pellets" | β Misclassification, 41.5% tax, potential fines |
| Polyester Copolymer | 3907.99.50.50 |
"Polymer Resin" | β Ambiguous, may trigger exam, 41.5% tax |
| Acrylic/Vinyl Copolymer | 3914.00.20.00 (if eligible) |
"Polymer" | β Can save 3.9% base duty if correctly identified as "Other" |
| Generic "Special Polymer" | Specific HS Code | "Special Structure Copolymer Material" (Vague) | β Rejection, Delay, Higher scrutiny |
β 3. Special Circumstances Handling
| Scenario | Handling Advice |
|---|---|
| Blends vs. Copolymers | If the product is a physical blend of two polymers (not chemically bonded), it may still be classified under the principal polymer or as a mixture. Provide proof of chemical bonding for "Copolymer" classification to ensure it falls under the correct subheading. |
| 122 Clause Specifics | The "122 Clause" in the DATA likely refers to a specific statutory provision (e.g., US Customs Note 2 to Chapter 39 or specific trade remedy). Ensure your product is not on the Entity List or subject to Anti-Dumping Duties (ADD) for specific polymers like PET or Acrylics. |
| De Minimis | Do NOT use Section 321 (De Minimis) for shipments from China for these industrial raw materials. The value threshold will be exceeded, and surcharges apply. |
π V. Global Market Tariff Comparison (2026 Snapshot)
| Market | Recommended HS Code | Base Duty | Total Effective Duty (CN Origin) | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 3902, 3907, or 3914 (per DATA) |
0% - 6.5% | 35% - 41.5% | Heavy Section 301 + IEEPA taxes. |
| π¨π³ China | 3902, 3907, 3914 |
5% - 8% | ~5-8% | No US surcharges. Preferential if under RCEP (if applicable to partner). |
| πͺπΊ EU | 3902, 3907, 3914 |
6.5% | ~6.5% | No US-style surcharges. CBAM may apply if carbon-intensive production. |
| π²π½ Mexico | 3902, 3907, 3914 |
5% - 6% | ~5-6% | USMCA compliance required for zero duty if meeting rules of origin. |
π Conclusion:
- The USA is the highest-cost market for these polymers due to layered tariffs (Base + 301 + IEEPA).
- Strategic Option: If possible, consider sourcing from or routing through countries with USMCA or FTA benefits (e.g., Mexico, Canada, Vietnam) to mitigate the 35%+ tax burden, provided rules of origin are met.
π VI. Common Mistakes & Pitfalls (Lessons Learned)
β Mistake 1: Using generic names like "Plastic Resin" in commercial invoices.
π Consequence: CBP may assign a default high-duty code or require a formal classification ruling, delaying shipment by weeks.
β Mistake 2: Confusing "Copolymer" with "Polymer Blend".
π Consequence: If itβs a blend, it might be classified under the most valuable polymer or as a mixture, potentially altering the HS Code and duty rate.
β Mistake 3: Ignoring the "122 Clause" Surcharge.
π Consequence: Underpayment of 10%. This is a statutory addition that is non-negotiable for Chinese-origin goods. Audits will catch this.
β Mistake 4: Assuming 3914 is always cheaper.
π Consequence: If your product is chemically a Polyester (3907) or Olefin (3902), forcing it into 3914 is fraudulent misclassification. Penalties can exceed 100% of the duty owed.
β Correct Practice:
"Ethylene-Propylene-Diene Monomer (EPDM) Copolymer, Primary Form, Granular, For Industrial Use, Model XYZ, MSDS Attached"
π― VII. Conclusion: Precision in Classification, Savings in Cost
π― Remember the Mantra:
πΉ "Olefins to 3902, Polyesters to 3907, Others to 3914."
πΉ "Base Rate is 0-6.5%, but Total is 35-41.5%."
πΉ "Chemistry Dictates Code, Code Dictates Cost."
π Pro Tip:
If your copolymer has unique structural features (e.g., block copolymers with specific applications), consider filing a Binding Ruling Request (BBR) with US Customs and Border Protection (CBP) before shipment. This provides legal certainty on the HS Code and avoids unexpected duties at the border.
π£ Immediate Action:
π Consult a Licensed Customs Broker + Verify Chemical Composition + Confirm HS Code via Binding Ruling
π Ensure Smooth Customs Clearance, Minimize Tariff Burden, Maximize Profit Margins!
β¨ Professional Customs Clearance Starts with Accurate Classification!
πΌ Every Percentage Point of Tax Saves You Money!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.