Splash Protection Cover
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3924104000 | 13.4% | CN | US | Official Doc |
| 3924103000 | 22.8% | CN | US | Official Doc |
| 6911108090 | 38.3% | CN | US | Official Doc |
| 7323999030 | 88.4% | CN | US | Official Doc |
| 7323930060 | 62.0% | CN | US | Official Doc |
Product Images
AI Analysis
π‘οΈ Splash Protection Cover (ι²ζΊ’η/ι²ζΊ η)
π HS Code Reference & Clearance Guide | 2026 Latest Tariff Analysis | Professional Customs Strategy
π I. Product Definition & Classification: What Exactly is a "Splash Protection Cover"?
A Splash Protection Cover is a protective accessory primarily used in kitchenware, cookware, or food processing equipment to prevent oil splatter, steam escape, or liquid overflow during cooking or heating processes. In international trade, its classification depends strictly on its material composition, as different materials fall under completely different HS Chapters with vastly different tax implications (especially under US Section 301 and "122 Clause" tariffs).
Key Material Distinctions: * Plastic Covers: Lightweight, heat-resistant polymers. Generally face the lowest tariff burden. * Ceramic Covers: Heat-resistant, decorative, or functional kitchen accessories. Subject to moderate-to-high base tariffs. * Metal Covers (Stainless Steel/Aluminum/Copper): Durable, conductive. Face significantly higher tariffs due to specific "Steel/Aluminum/Copper" trade restrictions.
β οΈ Critical Classification Point:
- Plastic β Chapter 39 (Plastics and articles thereof)
- Ceramic β Chapter 69 (Ceramic products)
- Metal (Steel/Al/Cu) β Chapter 73 (Articles of iron or steel)Misclassification can lead to severe penalties. Ensure the material is explicitly stated in commercial invoices.
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority Cross-Reference)
| HS Code | Product Description | Material | Applicable Scenario | Key Classification Note |
|---|---|---|---|---|
3924.10.40.00 |
Plastic splash protection cover, for cookware accessories | Plastic | Kitchen utensils, non-eating utensils | Lowest base tariff (3.4%). Best cost profile. |
3924.10.30.00 |
Plastic splash protection cover, classified as tableware/kitchenware | Plastic | Eating utensils or direct food contact items | Higher base tariff (5.3%) + 7.5% additional tariff. |
6911.10.80.90 |
Ceramic splash protection cover, other household goods | Ceramic | Decorative or functional ceramic lids | High base tariff (20.8%). Moderate additional tariff. |
7323.99.90.30 |
Metal splash protection cover, for food/beverage contact | Metal (Steel/Al/Cu) | General kitchen utensils, metal lids | Highest Tariff! Subject to 50% additional tariff on Steel/Al/Cu. |
7323.93.00.60 |
Stainless steel/metal splash protection cover, kitchen utensil accessories | Metal (Stainless Steel) | Stainless steel lids/accessories | High Additional Tariff (50% on Steel). |
π Key Reminder:
- Plastic items are generally exempt from the "Steel/Aluminum/Copper" surcharge.
- Metal items are subject to the 50% additional tariff if they fall under specific steel/aluminum categories, regardless of the base rate.
- The "122 Clause" tariff (10%) applies to ALL these categories for Chinese origin goods.
π° III. 2026 Latest Tariff Rate Breakdown (Including Surcharges & Policy Add-ons)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Time: Current trade terms (Including Section 301 & 122 Clause provisions)
π― 1. 3924.10.40.00 ββ Plastic Splash Cover (Cookware Accessory)
The most cost-effective option for plastic covers.
| Item | Content |
|---|---|
| Base Tariff | 3.4% |
| Section 301 Additional Tariff | 0.0% |
| 122 Clause Tariff | 10.0% |
| Total Effective Tax Rate | 13.4% |
| Tax Calculation | CIF Value Γ 13.4% |
| De Minimis Eligibility | β No (Subject to full duty calculation) |
| Legal Basis Path | HTSUS:3924.10.40.00 β 122 Clause:10% |
π Explanation:
- This classification treats the item as a "plastic article for household purposes" not primarily for eating.
- Total cost impact is low compared to metal alternatives.
π― 2. 3924.10.30.00 ββ Plastic Splash Cover (Tableware/Kitchenware)
Higher cost due to classification as tableware.
| Item | Content |
|---|---|
| Base Tariff | 5.3% |
| Section 301 Additional Tariff | 7.5% |
| 122 Clause Tariff | 10.0% |
| Total Effective Tax Rate | 22.8% |
| Tax Calculation | CIF Value Γ 22.8% |
| De Minimis Eligibility | β No |
| Legal Basis Path | HTSUS:3924.10.30.00 β Section 301:7.5% β 122 Clause:10% |
π Note:
- If your plastic cover is marketed as "eating utensil accessory" or "tableware," it may fall here.
- The 7.5% Section 301 surcharge makes this significantly more expensive than3924.10.40.00.
π― 3. 6911.10.80.90 ββ Ceramic Splash Cover
High base tariff due to ceramic material.
| Item | Content |
|---|---|
| Base Tariff | 20.8% |
| Section 301 Additional Tariff | 7.5% |
| 122 Clause Tariff | 10.0% |
| Total Effective Tax Rate | 38.3% |
| Tax Calculation | CIF Value Γ 38.3% |
| De Minimis Eligibility | β No |
| Legal Basis Path | HTSUS:6911.10.80.90 β Section 301:7.5% β 122 Clause:10% |
π Explanation:
- Ceramic products face high base duties.
- The 7.5% Section 301 applies to many ceramic items.
- Total burden is almost triple that of the lowest plastic tariff.
π― 4. 7323.99.90.30 ββ Metal Splash Cover (General Metal/Steel/Al/Cu)
The MOST EXPENSIVE category due to trade war surcharges.
| Item | Content |
|---|---|
| Base Tariff | 3.4% |
| Section 301 Additional Tariff | 25.0% |
| 122 Clause Tariff | 10.0% |
| Steel/Al/Cu Additional Tariff | 50.0% |
| Total Effective Tax Rate | 88.4% |
| Tax Calculation | CIF Value Γ 88.4% |
| De Minimis Eligibility | β No |
| Legal Basis Path | HTSUS:7323.99.90.30 β Section 301:25% β 122 Clause:10% β Steel/Al/Cu:50% |
π Warning:
- The 50% additional tariff for Steel, Aluminum, and Copper is the dominant cost driver.
- Even if the base tariff is low (3.4%), the total tax exceeds 88%.
- Avoid this HS Code if possible for Chinese-origin metal covers.
π― 5. 7323.93.00.60 ββ Stainless Steel Splash Cover
Also subject to the heavy 50% steel surcharge.
| Item | Content |
|---|---|
| Base Tariff | 2.0% |
| Section 301 Additional Tariff | 0.0% |
| 122 Clause Tariff | 10.0% |
| Steel/Al/Cu Additional Tariff | 50.0% |
| Total Effective Tax Rate | 62.0% |
| Tax Calculation | CIF Value Γ 62.0% |
| De Minimis Eligibility | β No |
| Legal Basis Path | HTSUS:7323.93.00.60 β 122 Clause:10% β Steel/Al/Cu:50% |
π Note:
- While the Section 301 tariff is 0% here, the 50% Steel surcharge remains.
- Total tax is still very high (62%).
- Stainless steel is treated as "Steel" under these trade restrictions.
π οΈ IV. Practical Clearance Advice (Battle-Tested Pitfall Guide)
β 1. Documentation Checklist (Non-Negotiable)
| Document | Mandatory? | Description |
|---|---|---|
| β Product Specification Sheet | βοΈ | Must explicitly state Material (e.g., "PP Plastic," "Porcelain," "304 Stainless Steel"). |
| β Commercial Invoice | βοΈ | Clearly describe as "Plastic/Ceramic/Metal Splash Cover for Kitchenware." Avoid vague terms like "Accessory." |
| β Product Photos | βοΈ | Show material texture, hinges, and any branding. Crucial for customs to verify material. |
| β Third-Party Test Report | βοΈ | FDA/LFGB (if food contact), Heat Resistance Test. |
| β Packing List | βοΈ | List items separately if mixed materials (e.g., Plastic cover with metal handle). |
β 2. Declaration Strategy (Key Mantra)
π₯ "Material is King! Plastic wins, Metal burns!"
| Scenario | Correct Declaration | Wrong Declaration | Result |
|---|---|---|---|
| Plastic Cover | "Plastic splash protector for cookware" β 3924.10.40.00 |
"Kitchen accessory" | 13.4% Tax β |
| Plastic Cover | "Tableware splash guard" β 3924.10.30.00 |
"Cookware accessory" | 22.8% Tax β οΈ |
| Ceramic Cover | "Ceramic lid for serving dish" β 6911.10.80.90 |
"Plastic lid" | 38.3% Tax (Misclassification Risk) |
| Metal Cover | "Stainless steel lid" β 7323.93.00.60 |
"Kitchen tool" | 62.0% Tax πΈ |
| Metal Cover | "Aluminum splash guard" β 7323.99.90.30 |
"Metal tool" | 88.4% Tax πΈπΈ |
β 3. Special Case Handling
| Situation | Advice |
|---|---|
| Mixed Material Covers (e.g., Plastic body with Metal hinge) | Declare the primary material or split the shipment. If the plastic body is >50% by value/weight, 3924 may apply. Otherwise, risk classification as metal. |
| OEM Private Label | Ensure the invoice does not mention "For Stainless Steel Pots" if it's plastic. Specific end-use can trigger different classifications. |
| Packaging Materials | Do not include plastic wrap or cardboard boxes in the "Splash Cover" declaration. They have different HS Codes and tariffs. |
| Origin Marking | All goods must be clearly marked "Made in China." Failure to do so can result in 25% penalty on top of duties. |
π V. Global Market Clearance Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Estimated Total Tax | Certification Required | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 3924.10.40.00 (Plastic) |
13.4% | FDA (if food contact) | Cheapest option. Metal/Ceramic face heavy surcharges. |
| πΊπΈ USA | 7323.99.90.30 (Metal) |
88.4% | None specific | Extremely expensive. Avoid if possible. |
| π¨π³ China | 3924.10.40.00 |
5-10% | CCC (if applicable) | Lower baseline tariffs. |
| πͺπΊ EU | 3924.10.00 |
4-6% | LFGB, EU Food Contact | No Section 301/122 Clause. More stable costs. |
| π¬π§ UK | 3924.10.00 |
4-6% | UKCA, Food Standards | Post-Brexit rules apply. |
π Conclusion:
- USA is the most difficult market for this product due to layered tariffs (Base + 301 + 122 + Steel Surcharges).
- Plastic covers (3924.10.40.00) are the only viable option for high-volume exports to the US without significant cost absorption.
- Metal covers are economically unviable for mass market export to the US from China.
π VI. Common Mistakes & Pitfalls (Blood-Tears Lessons)
β Mistake 1: Declaring a Metal Cover as "Kitchen Accessory" without specifying material.
π Consequence: Customs inspects, finds it's metal, reclassifies to 7323, and applies 88.4% tax + penalties.
β Mistake 2: Declaring a Plastic Cover as "Tableware" (3924.10.30.00) when it's for cookware.
π Consequence: Paying 22.8% instead of 13.4%. Unnecessary profit loss.
β Mistake 3: Mixing Plastic and Metal in one shipment without clear separation.
π Consequence: Customs may classify the entire shipment by the highest-tariff component (Metal), applying 88.4% to the whole lot.
β Correct Practice:
"PP Plastic Splash Guard for Cookware, Non-Contact with Food Directly, Model XYZ, Made in China"
HS Code:3924.10.40.00
Tax: 13.4%
π― VII. Conclusion: Precise Classification Saves Money!
π― Remember the Mantra:
πΉ "Plastic 13%, Ceramic 38%, Metal 62-88%!"
πΉ "Material dictates tax! Don't let metal crush your margin!"
πΉ "HS Code is destiny. Declare correctly, sleep well!"
π Pro Tip:
If your product is plastic, insist on the classification 3924.10.40.00 in all communications with customs brokers. Provide technical data sheets proving it is PP (Polypropylene) or Silicone, not "plastic composite" with metal reinforcements.
π£ Immediate Action:
π Contact your customs broker with the product photo and material report.
π Request a Pre-Ruling if importing large volumes to ensure the 13.4% rate is locked in.
πΌ Your profit margin depends on this 5-digit code!
β¨ Professional clearance starts with precise classification!
πΌ Every dollar of duty saved is pure profit!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.