Stainless Steel Measuring Cup Set 10 Pieces
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 7323930060 | 62.0% | CN | US | Official Doc |
| 7323930080 | 62.0% | CN | US | Official Doc |
| 7418100053 | 70.5% | CN | US | Official Doc |
| 3924104000 | 13.4% | CN | US | Official Doc |
| 7323930080 | 62.0% | CN | US | Official Doc |
AI Analysis
π₯ Stainless Steel Measuring Cup Set (10-Piece)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Entry Strategy
π I. Product Definition & Classification: Is It Plastic or Metal?
A "Stainless Steel Measuring Cup Set" is a kitchen utensil primarily used for precise volume measurement in cooking and baking. In international trade, the material is the single most critical factor determining the Harmonized System (HS) code.
β οΈ Key Distinction:
- If the cups are made of Stainless Steel β They fall under Chapter 73 (Articles of Iron or Steel).
- If the cups are made of Plastic β They fall under Chapter 39 (Articles of Plastic).
- Note: Some classifiers might misclassify stainless steel as "Copper Base Metal" due to broad categorization errors, leading to Chapter 74. This is technically incorrect but appears in some broad datasets.
π¦ II. HS Code Classification Details (Based on Provided Data)
The provided data indicates three primary material scenarios for this product. Below is the detailed breakdown:
| HS Code | Product Description | Material Category | Applicable Scenario |
|---|---|---|---|
7323.93.00.60 |
Measuring Cups (Kitchenware) | Stainless Steel | Specific classification for stainless steel kitchen utensils. |
7323.93.00.80 |
Other Stainless Steel Kitchenware | Stainless Steel | General classification for stainless steel items not specifically listed elsewhere. |
7418.10.00.53 |
Kitchenware (Copper Base Metal Extension) | Misclassified/Extended | Note: Stainless steel is iron-based, not copper. This code applies if customs erroneously classifies under copper base metals or if the product contains significant copper alloys (unlikely for standard SS cups). |
3924.10.40.00 |
Kitchenware, of Plastic | Plastic | Applies if the set is not stainless steel, but plastic. |
π Critical Reminder:
- For "Stainless Steel Measuring Cup Set", codes7323.93.00.60and7323.93.00.80are the correct classifications.
- Code7418.10.00.53is likely a misclassification or an extended category error (stainless steel β copper base metal). Use with extreme caution or avoid.
- Code3924.10.40.00is incorrect for stainless steel; it applies only to plastic sets.
π° III. 2026 Latest Tariff Rate Details (Including Additional Taxes)
β Applicable Country: USA (US)
β Origin: China (CN)
β Effective Time: Post-2025 trade policies (Section 301 & IEEPA)
π― 1. 7323.93.00.60 & 7323.93.00.80 ββ Stainless Steel Kitchenware
These two codes have identical tax structures in the provided data.
| Item | Content |
|---|---|
| Basic Tariff | 2.0% (Ad Valorem) |
| Section 301 Tariff (122 Clause) | +50% (For Steel/Aluminum/Copper products) |
| Section 301 Additional Tax | 0.0% |
| Total Tariff Rate | 62.0% |
| Tax Calculation | CIF Value Γ 62.0% |
| De Minimis Eligibility | β Not Eligible |
| Legal Basis Path | USITC:7323.93.00.60/80 β Section 301: Steel/Aluminum/Copper |
π Explanation:
- 2.0% is the standard MFN (Most Favored Nation) duty for stainless steel kitchenware.
- 50% is the high additional tariff applied under Section 301 specifically for steel articles from China.
- Total 62% is a very high duty rate. This significantly impacts profit margins.
π― 2. 7418.10.00.53 ββ Kitchenware (Copper Base Metal Classification Error)
β οΈ Warning: This code is likely incorrect for standard stainless steel cups. Stainless steel is an alloy of iron, not copper. However, if the data forces this classification, the tax burden is even higher.
| Item | Content |
|---|---|
| Basic Tariff | 3.0% |
| Section 301 Additional Tax | +7.5% |
| Section 301 Clause 122 Tax | +50% |
| Total Tariff Rate | 70.5% |
| Tax Calculation | CIF Value Γ 70.5% |
| De Minimis Eligibility | β Not Eligible |
π Note:
- This rate is higher than the correct steel classification.
- Misclassifying stainless steel as "copper base metal" can lead to customs penalties for false declaration. Avoid this code unless the product is genuinely copper-plated or copper-alloy based.
π― 3. 3924.10.40.00 ββ Plastic Kitchenware (Incorrect for Stainless Steel)
| Item | Content |
|---|---|
| Basic Tariff | 3.4% |
| Section 301 Additional Tax | 0.0% |
| Total Tariff Rate | 13.4% |
| Tax Calculation | CIF Value Γ 13.4% |
π Note:
- If you mistakenly declare stainless steel cups as plastic, you risk severe penalties for fraud.
- However, if the set contains some plastic handles or is a mixed set, ensure proper disclosure. Pure stainless steel sets must use Chapter 73.
π οΈ IV. Customs Clearance Practical Advice (Real-World Pitfall Guide)
β 1. Preparation Checklist (Essential Documents)
| Document | Required | Explanation |
|---|---|---|
| β Product Specification Sheet | βοΈ | Must explicitly state: "Material: 18/8 Stainless Steel" (or similar grade). |
| β Product Photos | βοΈ | Clear images showing the metallic sheen, no plastic packaging that obscures material. |
| β Commercial Invoice | βοΈ | Must list "Stainless Steel Measuring Cups" as the description. Do not use vague terms like "Kitchen Set" without material specification. |
| β HS Code Justification | βοΈ | Provide a brief note explaining why HS 7323.93.00.60 was chosen (i.e., "Stainless steel article, not elsewhere specified"). |
| β Packing List | βοΈ | Confirm weight and quantity (10 pieces). |
β 2. Declaration Tips (Key Mnemonic)
π₯ "Material First, Code Follows, Stainless is Steel, Not Copper, Not Plastic!"
| Scenario | Correct Declaration | Incorrect Declaration | Risk |
|---|---|---|---|
| Stainless Steel Cups | HS 7323.93.00.60 + Material: Stainless Steel |
HS 7418.10.00.53 (Copper) |
70.5% Tax + Fraud Penalty |
| Stainless Steel Cups | HS 7323.93.00.60 |
HS 3924.10.40.00 (Plastic) |
13.4% Tax β Re-classified β 62% Tax + Fine |
| Mixed Set (SS + Plastic) | Split Declaration: SS part to Ch.73, Plastic part to Ch.39 | Single HS Code for whole set | Misclassification |
β 3. Special Cases & Handling
| Case | Recommendation |
|---|---|
| OEM Custom Cups | Provide OEM contract and design specs to prove material origin. |
| Packaging Includes Plastic Handles | If handles are non-removable plastic, the whole item may still be classified as steel if steel is the essential character. Declare as Steel. |
| Gift Sets | If the set includes non-measuring items (e.g., a spoon rack), ensure only the measuring cups are declared under 7323.93.00.60. |
| Origin Change | If shipped from Vietnam or Mexico, apply for USMCA/FTA benefits to reduce Section 301 tariffs. |
π V. Global Market Customs Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Certification | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 7323.93.00.60 |
62.0% | None | High due to Section 301 on steel. |
| π¨π³ China | 7323.93.00.60 |
9.0% | CCC (if applicable) | No additional tariffs for domestic trade. |
| πͺπΊ EU | 7323.93.00.90 |
2.7% | None | Lower base rate, no Section 301. |
| π¬π§ UK | 7323.93.00.90 |
2.7% | UKCA | Post-Brexit alignment with EU. |
| π¦πΊ Australia | 7323.93.00.00 |
5.0% | None | Moderate tariff. |
π Conclusion:
- The USA has the highest tariff burden (62%) for stainless steel kitchenware from China due to Section 301.
- Consider supply chain diversification (e.g., manufacturing in Vietnam) to mitigate this cost.
- Do not misclassify as plastic or copper to save taxes; customs audits are strict on material composition.
π VI. Common Errors & Pitfall Guide (Lessons Learned)
β Error 1: Declaring stainless steel cups as "Plastic Kitchenware" (3924.10.40.00)
π Consequence: Customs lab test reveals steel β Back-dated duty (62%) + Penalty + Interest.
β Error 2: Using HS 7418.10.00.53 (Copper) for Stainless Steel
π Consequence: 70.5% Tax + Misdeclaration Fine. Stainless steel is iron-based, not copper.
β Error 3: Vague Description "Kitchen Set"
π Consequence: Customs may classify under the highest duty item or hold shipment for inspection.
β Correct Declaration Example:
"Stainless Steel Measuring Cups, 10-Piece Set, Material: 18/8 Stainless Steel, HS Code: 7323.93.00.60, Origin: China"
π― VII. Conclusion: Precise Classification Saves Thousands!
π― Remember the Rule:
πΉ "Stainless Steel = Chapter 73, Tariff 62%."
πΉ "Plastic = Chapter 39, Tariff 13.4%."
πΉ "Never Mix Up Material β Never Mix Up HS Code!"
π Pro Tip:
If your supply chain can shift production to Vietnam, Thailand, or Mexico, you may qualify for Section 301 exemptions or lower tariffs.
Consult a customs broker for an Advance Ruling to confirm HS7323.93.00.60vs7323.93.00.80based on your specific product design.
π£ Immediate Action:
π Verify Material: Ensure 100% stainless steel.
π Use Correct HS Code:7323.93.00.60.
π Plan for 62% Duty: Factor this into your pricing strategy.
β¨ Accurate Classification is the Key to Smooth Clearance!
πΌ Don't Let Tariffs Eat Your Profits!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.