Stretch Wrap Film (PE)
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3920100000 | 39.2% | CN | US | Official Doc |
Product Images
AI Analysis
π¦ Stretch Wrap Film (PE) β Polyethylene Packaging Solutions
π HS Code Reference & Clearance Guide | 2026 Latest Tariff Analysis | Professional Customs Strategy
π Part I: Product Definition & Classification: Do You Truly Understand "Stretch Film"?
Stretch wrap film, also known as pallet wrap or cling film, is a versatile plastic material used to bundle small loads onto pallets for storage and transport. In international trade, it is primarily classified based on its chemical composition and physical structure.
Key Characteristic:
- Material: Polyethylene (PE), a polymer of ethylene.
- Structure: Non-cellular, not reinforced, laminated, supported, or similarly combined with other materials.
- Form: Rolls (film/strip).
β οΈ Critical Distinction:
- If the film is reinforced (e.g., with fiberglass, mesh, or other materials) β It falls under different HS Codes (e.g., Chapter 39, heading 3920 but other subheadings, or potentially Chapter 3901/3902 depending on base polymer).
- If the film is cellular (foamed) β It falls under 3921 (Plastics plates, sheets, film, foil and strip, other than those of heading 3919).
- This guide specifically addresses NON-CELLULAR, UNREINFORCED PE stretch wrap, which is the most common industrial packaging material.
π¦ Part II: HS Code Classification Details (2026 Latest Tariff Authority Reference)
Based on the provided , the specific classification is:
| HS Code | Product Description | Key Attributes | Applicable Scenarios |
|---|---|---|---|
3920.10.00.00 |
Other plates, sheets, film, foil and strip, of plastics, noncellular and not reinforced, laminated, supported or similarly combined with other materials: Of polymers of ethylene | β’ Base Material: Polyethylene (PE) β’ Structure: Non-cellular β’ Reinforcement: None |
β’ Industrial pallet wrapping β’ Agricultural wrap β’ General-purpose packaging film β’ Clear, colored, or printed stretch film |
π Focus Reminder:
- Must be Polyethylene (PE): If the film is PVC, PP, or other polymers, this code is invalid.
- Must be Non-Reinforced: No mesh, no fiber, no lamination.
- Must be Non-Cellular: No foam or bubbles.
- If these conditions are met,3920.10.00.00is the correct and only classification under the provided data.
π° Part III: 2026 Latest Tariff Rate Details (Including Additional Taxes & Policy Surcharges)
β Source Data Reference:
{"hscode":"3920.10.00.00","tax":{"tax_detail":"εΊη‘ε ³η¨: 0.0%, ε εΎε ³η¨: 0.0%","total_tax":"0.0%"}}
β Total Tax Rate: 0.0%
π― 1. 3920.10.00.00 ββ Polyethylene Stretch Wrap Film (Non-Reinforced, Non-Cellular)
| Item | Detail |
|---|---|
| Base Tariff | 0.0% |
| Additional Tariff | 0.0% |
| Total Tax Rate | 0.0% |
| Tax Calculation | CIF Value Γ 0% = $0 |
| De Minimis Eligibility | β Yes (Generally, if value is below the threshold, no tax is due anyway; however, even above threshold, rate is 0%) |
| Legal Basis Path | USITC:3920.10.00.00 β FOOTNOTE:N/A (No additional footnotes indicated in data) |
π Explanation:
- 0.0% Total Tax: This is a highly favorable tariff rate.
- No Additional Taxes: According to the provideddata, there are no USITC 301 tariffs, IEEPA surcharges, or other penalties applied to this specific HS Code.
- Cost Advantage: Unlike many electronics or steel products, plastic films like PE stretch wrap enjoy duty-free entry under this classification, making it a cost-effective shipping option.
π οΈ Part IV: Customs Clearance Practical Advice (Real-World Pitfall Avoidance)
β 1. Required Documentation List (ηΌΊδΈδΈε―)
| Document | Mandatory? | Explanation |
|---|---|---|
| β Commercial Invoice | βοΈ | Must clearly state: "Stretch Wrap Film, Polyethylene, Non-Reinforced" |
| β Packing List | βοΈ | Specify roll diameter, width, thickness (microns), and weight per roll |
| β Product Specification Sheet | βοΈ | Confirm: Non-cellular, Non-reinforced, PE Material |
| β Certificate of Origin (CO) | βοΈ | To verify origin (though tax is 0%, some markets still require it for tracking) |
| β Safety Data Sheet (SDS) | βοΈ | For chemical safety compliance (PE is generally low risk, but required) |
β 2. Declaration Tips (Key Mantras)
π₯ βMaterial: PE, Structure: Solid, Reinforcement: Noneβ
| Scenario | Correct Declaration | Incorrect Practice |
|---|---|---|
| Standard PE Stretch Wrap | 3920.10.00.00 |
Mislabeling as "Plastic Sheet" (3921) β Potential 5-10% tax |
| Reinforced Stretch Film (with Mesh) | NOT 3920.10.00.00 β Check other subheadings | Using 3920.10.00.00 β Classification Error & Penalty |
| PVC Stretch Film | NOT 3920.10.00.00 | Using 3920.10.00.00 β Wrong Material Classification |
| Foamed PE Film | NOT 3920.10.00.00 β Likely 3921 | Using 3920.10.00.00 β 0% vs. Higher Rate Risk |
β 3. Special Handling Cases
| Case | Handling Advice |
|---|---|
| Printed Stretch Film | Still 3920.10.00.00 if printing is surface-level and no lamination added |
| Additives (e.g., tackifiers) | Still 3920.10.00.00 as long as base is PE and no reinforcement |
| OEM Custom Width/Thickness | Provide detailed specs to prove it is a standard plastic film, not a specialized product |
| Bulk vs. Retail Packaging | Both fall under 3920.10.00.00 if the product itself is unchanged |
π Part V: Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff Rate | Certification Requirements | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 3920.10.00.00 |
0.0% | None (Low Risk) | Duty-Free! No 301 tariffs apply to this specific PE film code. |
| π¨π³ China | 3920.10.00.00 |
~0% | None | Often duty-free for raw plastic films |
| πͺπΊ EU | 3920.10.00.00 |
6.5% | REACH Compliance | Not 0% in EU! High tariffs in Europe compared to US. |
| π¬π§ UK | 3920.10.00.00 |
6.5% | UKCA Marking | Similar to EU post-Brexit |
| π¦πΊ Australia | 3920.10.00.00 |
5.0% | None | Moderate tariff |
π Conclusion:
- USA is the most duty-friendly market for this product with 0.0% total tax.
- EU and UK impose ~6.5% tariffs, so consider origin or supply chain adjustments for these markets.
- China, Australia have low to zero tariffs.
π Part VI: Common Errors & Pitfall Avoidance (Blood & Tears Lessons)
β Error 1: Declaring Reinforced Stretch Wrap as 3920.10.00.00
π Consequence: Misclassification. Reinforced films have different HS codes. Penalty + Back Tax!
β Error 2: Declaring PVC Stretch Wrap as PE (3920.10.00.00)
π Consequence: Material Mismatch. PVC films fall under different subheadings (e.g., 3920.10.90 or similar). Audit risk!
β Error 3: Ignoring Non-Cellular Requirement
π Consequence: If foam is present, itβs 3921. Declaring as 3920 is false declaration. Fines!
β Error 4: Vague Description "Plastic Wrap"
π Consequence: Customs may detain for further inspection. Always specify Material (PE) and Structure (Non-Reinforced).
β Correct Practice:
"Stretch Wrap Film, 23 Micron, 12 Inch Width, Polyethylene (PE), Non-Cellular, Non-Reinforced, Unprinted, Roll"
π― Part VII: Conclusion: Precise Classification, Maximize Profit!
π― Remember the Mantra:
πΉ βPE Material, Solid Structure, No Mesh, No Foam = 3920.10.00.00β
πΉ β0% Tax in USA, 6.5% in EU, Be Clear in Declaration!β
πΉ βHS Code Determines Duty, 0% is Free Money, Donβt Leave It on the Table!β
π Pro Tip:
- If you are exporting to the USA, highlight the 0.0% total tax in your cost breakdown to customers.
- If exporting to the EU, factor in the 6.5% tariff for accurate pricing.
- Always provide Material Safety Data Sheets (MSDS) and Test Reports proving PE composition and Non-Reinforced status to avoid delays.
π£ Immediate Action:
π Contact your customs broker with detailed specs
π Ensure your invoice reads: "Polyethylene Stretch Film, Non-Reinforced, Non-Cellular"
π° Enjoy 0% Duty in the USA β Keep Your Margins High!
β¨ Professional Clearance Starts with Accurate Classification!
πΌ Your Every Penny Saved Counts!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.