Teak Flooring Wood
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 4407230100 | 35.0% | CN | US | Official Doc |
| 4407190093 | 35.0% | CN | US | Official Doc |
| 4418919105 | 38.2% | CN | US | Official Doc |
| 4418999105 | 38.2% | CN | US | Official Doc |
| 4409229090 | 35.0% | CN | US | Official Doc |
| 4409292660 | 35.0% | CN | US | Official Doc |
Product Images
AI Analysis
π³ Teak Flooring Wood (The King of Woods)
π HS Code Reference & Customs Clearance Guide | 2026 Tariff Analysis | Professional Strategy
π I. Product Definition & Classification: Are You Sure It's "Teak Flooring"?
Teak Flooring is a premium, tropical hardwood product known for its natural oils, durability, and resistance to rot. In international trade, it is often processed into specific forms before being classified. The critical distinction lies in the state of processing and finish:
- Raw/Unfinished Teak Sawn Lumber: Thickness >6mm, may be planed/sanded but not shaped with tongues/grooves or assembled.
- Shaped Teak (Parquet Strips): Continuous shaping (tongued, grooved, V-jointed) along edges, but not assembled into a final floor.
- Assembled Teak Flooring: Pre-finished, assembled panels, or "builders' joinery" (e.g., bamboo or other wood flooring panels, excluding raw teak strips if not shaped).
β οΈ Critical Distinction:
- If the teak is just sawn, planed, or sanded (thickness >6mm) β Chapter 4407.
- If the teak is continuously shaped (tongued/grooved) but not assembled β Chapter 4409.
- If the teak is assembled or falls under "Builders' joinery" of specific sub-categories β Chapter 4418 (Note: The provided data shows "Other Wood Flooring" under 4418, but raw Teak is typically 4407/4409 unless specifically processed as an assembled panel system).
π¦ II. HS Code Classification Details (2026 Data Analysis)
Based on the provided data, here is the authoritative breakdown for Teak Flooring Wood:
| HS Code | Product Description | Processing State | Key Features |
|---|---|---|---|
| 4407.23.01.00 | Wood Sawn/Chipped (Thickness >6mm): Tropical Wood: Teak | Raw/Planed/Sanded | Standard sawn timber. No edge shaping (tongue/groove). Thickness must be >6mm. |
| 4409.22.90.90 | Continuously Shaped (Tongued/Grooved): Nonconiferous: Tropical: Other | Shaped (Unassembled) | Teak strips with continuous shaping (T&G). Not assembled into panels. |
| 4409.29.26.60 | Continuously Shaped (Tongued/Grooved): Nonconiferous: Other: Wood Flooring | Shaped (Unassembled) | Specific sub-category for "Wood Flooring Other" (likely generic non-Tropical or mixed). Verify if Teak fits "Other" here if not in 4409.22. |
| 4418.91.91.05 | Builders' Joinery: Other: Of Bamboo: Other Wood Flooring | Assembled/Processed | β οΈ Caution: This code explicitly mentions Bamboo. Unless your Teak flooring is marketed as "Bamboo Teak" or a composite, this may be a mismatch. |
| 4418.99.91.05 | Builders' Joinery: Other: Other: Other Wood Flooring | Assembled/Processed | General "Other Wood Flooring" category. May apply if the teak is fully assembled as a panel system. |
| 4407.19.00.93 | Coniferous: Other Other: Not treated: Other | β οΈ Not Teak | Excluded: This is for Coniferous (Softwood) like Pine/Fir. Teak is Hardwood/Tropical, do NOT use this code. |
π Focus Points:
- 4407.23.01.00 is the primary code for raw Teak lumber >6mm.
- 4409.22.90.90 is the primary code for shaped Teak strips (Tongue & Groove) ready for installation.
- 4418 Codes are for assembled floor panels. If you sell raw teak strips, do not use 4418.
π° III. 2026 Tariff Rate Breakdown (Total Tax Analysis)
β Market: General Import (Likely US context given "Additional Tariff" structure in data)
β Origin: China (Typical source for Teak)
β Product: Tropical Hardwood (Teak)
π― 1. 4407.23.01.00 β Raw Teak Lumber (Thickness >6mm)
| Item | Content |
|---|---|
| Base Tariff | 0.0% (Free trade agreement or base rate) |
| Additional Tariff (Section 301) | +25.0% |
| Total Tax Rate | 25.0% |
| Calculation | CIF Value Γ 25% |
| Policy Note | Standard Section 301 tariff on tropical wood products from China. |
π Explanation:
- Despite a 0% base duty, the 25% "Additional Tariff" applies due to trade restrictions on Chinese tropical wood.
- Total Cost Impact: You pay 25% of the product value in duties.
π― 2. 4409.22.90.90 β Shaped Teak Strips (Tongued/Grooved)
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Additional Tariff (Section 301) | +25.0% |
| Total Tax Rate | 25.0% |
| Calculation | CIF Value Γ 25% |
| Policy Note | Shaping adds value, but the tariff remains 25% for Tropical Wood. |
π Explanation:
- Similar to raw lumber, the 25% additional duty applies.
- Key: Ensure the description explicitly mentions "Continuously Shaped" to avoid being misclassified as raw wood.
π― 3. 4418.91.91.05 β Bamboo/Other Wood Flooring (Assembled)
| Item | Content |
|---|---|
| Base Tariff | 3.2% |
| Additional Tariff (Section 301) | +25.0% |
| Total Tax Rate | 28.2% |
| Calculation | CIF Value Γ 28.2% |
| Policy Note | β οΈ Warning: This code mentions "Of Bamboo". If your product is pure Teak, this classification might be incorrect unless it's a composite or mislabeled. |
π Explanation:
- If correctly classified as "Other Wood Flooring" (4418.99), see below.
- If applying 4418.91.91.05 (Bamboo), the rate is 28.2%.
- Risk: Misclassification as Bamboo for Teak could lead to penalties.
π― 4. 4418.99.91.05 β Other Wood Flooring (Assembled)
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Additional Tariff (Section 301) | 0.0% (No Additional Tariff listed for this specific sub-code in data) |
| Total Tax Rate | 0.0% |
| Calculation | CIF Value Γ 0% |
| Policy Note | Exception! Some assembled floorings (non-tropical or specific "Other" categories) may be exempt from the 25% additional tariff. |
π Explanation:
- Crucial Strategy: If your Teak is processed into assembled panels that fall under4418.99.91.05, you might avoid the 25% tariff.
- Verification: Confirm with the specific sub-heading description. If the product is "Assembled Teak Flooring" and fits "Other", this 0% rate is a golden opportunity.
π οΈ IV. Customs Clearance Operational Advice (Avoid Pitfalls)
β 1. Essential Documentation Checklist
| Document | Requirement | Purpose |
|---|---|---|
| Detailed Product Spec | βοΈ | Must state: Thickness, Finish (Planed/Sanded), Shaping (Tongue/Groove), Origin (Teak). |
| Photos (Raw & Finished) | βοΈ | Prove the product is "Wood Flooring" and not "Construction Timber". |
| Bill of Materials | βοΈ | If "Assembled", show components. If "Raw", show logs. |
| FSC/Certificate of Origin | βοΈ | Mandatory for Tropical Wood to prove legal harvesting (Lacey Act compliance). |
| Commercial Invoice | βοΈ | Must clearly state "Teak Flooring" and HS Code. |
β 2. Declaration Strategy (The "Teak" Trap)
π₯ Golden Rule: "Shape Determines Code, Assembly Determines Exemption!"
| Scenario | Correct HS Code | Risk if Wrong |
|---|---|---|
| Raw Teak Planks (>6mm) | 4407.23.01.00 |
25% Duty. |
| Tongue & Groove Teak Strips | 4409.22.90.90 |
25% Duty. |
| Assembled Teak Panel System | 4418.99.91.05 |
0% Duty (If eligible). |
| Mislabeling Teak as Bamboo | 4418.91.91.05 |
28.2% Duty + Fraud Risk. |
| Mislabeling Teak as Softwood | 4407.19.00.93 |
Rejected (Teak is Tropical, not Coniferous). |
β 3. Special Handling Tips
| Situation | Recommendation |
|---|---|
| Lacey Act Compliance | Teak is a tropical wood. You must provide a declaration of legality. Failure leads to seizure. |
| Thickness < 6mm | If thickness is <6mm, it moves to Chapter 4408 (Veneer/Wood). Do not use 4407. |
| Assembled vs. Unassembled | If the product is "Click-Flooring" (assembled), argue for 4418.99.91.05 to secure the 0% tariff. |
| Treatment Status | If "Treated" (e.g., chemical preserved), tax may change. Ensure "Not Treated" if claiming 0% base rate. |
π V. Global Market Comparison (2026)
| Market | Recommended HS Code | Duty Rate (China Origin) | Key Requirement |
|---|---|---|---|
| πΊπΈ USA | 4407.23.01.00 or 4409.22.90.90 |
25% (Section 301) | Lacey Act + FSC Cert |
| πΊπΈ USA (Assembled) | 4418.99.91.05 |
0% (If eligible) | Must prove "Assembled" status |
| πͺπΊ EU | 4407.23 |
~3.5% - 5% | EUTR Compliance (Deforestation) |
| π¨π³ China | 4407.23.01.00 |
0% | Standard Export |
π Conclusion:
- USA is the most expensive market for raw/shaped Teak (25% tariff).
- Strategy: If possible, process Teak into assembled flooring panels (4418.99.91.05) to potentially access the 0% tariff tier.
- Verification: Double-check if the specific Teak assembly qualifies for4418.99.91.05vs.4418.91.91.05(Bamboo).
π VI. Common Errors & Solutions (Lessons Learned)
β Error 1: Classifying Raw Teak as "Assembled Flooring" (4418) to avoid taxes.
π Consequence: Customs audit β 25% tax + Penalty.
β
Fix: Be honest about the "Shaping" vs "Assembly" status.
β Error 2: Using 4407.19.00.93 (Coniferous) for Teak.
π Consequence: Rejection. Teak is Tropical.
β
Fix: Always use 4407.23.xxxx for Teak.
β Error 3: Ignoring the Lacey Act for Teak.
π Consequence: Seizure of Goods.
β
Fix: Submit Lacey Act Declaration + FSC Certificate with every shipment.
π― VII. Final Strategy: How to Save Money on Teak Flooring
- Analyze the Form: Is it Raw/Plank (25% tax) or Assembled Panel (0% tax potential)?
- Choose the Right Code:
- Raw/Plank β
4407.23.01.00(25%) - Shaped Strips β
4409.22.90.90(25%) - Assembled Panels β
4418.99.91.05(0%) (Target this!)
- Raw/Plank β
- Document Everything: FSC, Lacey Act, Detailed Photos.
- Avoid "Bamboo" Mislabeling: Do not put
4418.91.91.05unless it contains bamboo.
π Pro Tip: If your Teak flooring is sold as a "Click System" (assembled), prioritize the
4418.99.91.05classification to bypass the 25% additional tariff. Consult with a customs broker to confirm eligibility.
β¨ Precision in Classification = Profit in Your Pocket!
πΌ Don't let a 25% tariff eat your margins. Classify correctly today.
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.