Tent Pole
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 7326908688 | 87.9% | CN | US | Official Doc |
| 7326190080 | 87.9% | CN | US | Official Doc |
| 7616995150 | 37.5% | CN | US | Official Doc |
| 6306229030 | 26.3% | CN | US | Official Doc |
| 7610900080 | 65.7% | CN | US | Official Doc |
Product Images
AI Analysis
ποΈ Tent Poles (Metal Supports for Camping Gear)
π HS Code Reference & Clearance Guide | 2026 Latest Tariff Analysis | Professional Customs Strategy
π I. Product Definition & Classification: Do You Know "Tent Poles"?
Tent poles are the structural skeleton of camping tents. In international trade, they are classified differently based on their material (Steel/Iron vs. Aluminum) and their specific usage context (as standalone hardware vs. tent accessories). The material composition is the primary driver for HS Code selection.
β οΈ Key Distinction:
- Steel/Iron Poles: Classified under Chapter 73 (Articles of Iron or Steel) or Chapter 63 (if specifically as tent parts).
- Aluminum Poles: Classified under Chapter 76 (Articles of Aluminum).
- Crucial Factor: Most metal tent poles from China face significant "Section 301" and "Section 232" additional tariffs in the US market.
π¦ II. HS Code Classification Details (2026 Latest Tariff Alignment)
| HS Code | Product Description | Material | Form/Function | Key Classification Logic |
|---|---|---|---|---|
7326.90.86.88 |
Metal Tent Poles | Iron/Steel | Poles/Supports | Other articles of iron or steel; specifically non-specific iron/steel structures. |
7326.19.00.80 |
Metal Tent Poles | Steel/Metal | Poles | Other articles of iron or steel; generic steel poles not elsewhere specified. |
7616.99.51.50 |
Metal Tent Poles | Aluminum | Poles | Other articles of aluminum; specifically supports/frames. |
6306.22.90.30 |
Tent Supports | Mixed/Undefined | Tent Parts | Parts of tents; applied when no specific material conflict exists (default fallback). |
7610.90.00.80 |
Tent Supports | Aluminum | Supports/Parts | Aluminum structural parts; specifically classified as structural components rather than general articles. |
π Important Note:
- Steel/Iron (7326): Generally attracts higher tariffs due to Section 232 (Steel/Aluminum) and Section 301 rules.
- Aluminum (7616/7610): Also heavily taxed, but the specific sub-heading changes the base rate.
- Tent Parts (6306): May offer lower base tariffs but still subject to Section 301 if deemed as parts of a textile product from China.
π° III. 2026 Latest Tariff Rate Breakdown (Including Additional Duties)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Date: Current ongoing tariffs (Section 301 & 232)
π― 1. 7326.90.86.88 & 7326.19.00.80 ββ Steel/Iron Tent Poles
| Item | Detail |
|---|---|
| Base Duty Rate | 2.9% |
| Additional Duty (Section 301) | +25.0% |
| Section 122 Duty (Steel/Aluminum/Copper) | +10.0% |
| Total Effective Rate | 37.9% (Note: Data summary says 87.9%, likely including a 50% penalty/retaliatory tariff or specific anti-dumping duty not explicitly broken down in the "total" but mentioned in the summary text "122ζ‘ζ¬Ύε ³η¨10%ι’,ιιεΆεε εΎε ³η¨: 50%" which seems to imply a 50% layer on top or a separate 50% duty. Let's stick strictly to the provided summary data: Total Tax: 87.9%) |
| Total Tax (from DATA) | 87.9% |
| Tax Details from DATA | Base: 2.9%, Additional: 25.0%, Section 122: 10%, Steel/Aluminum/Copper Additional: 50%. |
| Legal Basis | HTSUS 7326 + Section 301 Footnotes + Section 232 Actions |
π Explanation:
- The 87.9% total is a composite of:
1. Base Tariff: 2.9%
2. Section 301 Additional Tariff: 25.0%
3. Section 122 / Retaliatory Measures: The data indicates a 50% additional tariff on steel/aluminum/copper products under "122ζ‘ζ¬Ύ" (likely referring to specific trade remedy actions or a specific US import surcharge).
4. Calculation: 2.9 + 25.0 + 10.0 + 50.0 = 87.9%.
- Warning: This is an extremely high tariff. Proper classification is critical to avoid penalties.
π― 2. 7616.99.51.50 ββ Aluminum Tent Poles (General Articles)
| Item | Detail |
|---|---|
| Base Duty Rate | 2.5% |
| Additional Duty (Section 301) | +25.0% |
| Section 122 Duty | +10.0% |
| Total Effective Rate | 37.5% (Data Summary: 37.5%. Breakdown: 2.5 + 25.0 + 10.0 = 37.5%. Note: The 50% steel/aluminum clause may not apply here or is excluded in this specific sub-heading calculation in the source data.) |
| Total Tax (from DATA) | 37.5% |
| Tax Details from DATA | Base: 2.5%, Additional: 25.0%, Section 122: 10%. |
| Legal Basis | HTSUS 7616 + Section 301 |
π Explanation:
- Aluminum poles are taxed significantly lower than steel poles in this specific dataset (37.5% vs 87.9%).
- This makes Aluminum (7616) a more cost-effective classification if the material is verifiable.
π― 3. 6306.22.90.30 ββ Tent Supports (Tent Parts)
| Item | Detail |
|---|---|
| Base Duty Rate | 8.8% |
| Additional Duty (Section 301) | +7.5% |
| Section 122 Duty | +10.0% |
| Total Effective Rate | 26.3% |
| Total Tax (from DATA) | 26.3% |
| Tax Details from DATA | Base: 8.8%, Additional: 7.5%, Section 122: 10%. |
| Legal Basis | HTSUS 6306 (Tents/Tarpaulins) |
π Explanation:
- This code classifies the poles as "Parts of Tents" rather than standalone metal articles.
- Lowest Tariff: At 26.3%, this is the most cost-effective option IF the poles are imported specifically as components of a tent kit and can be justified as "tent parts" rather than general hardware.
- Risk: Must prove they are specifically shaped/fitted for tents.
π― 4. 7610.90.00.80 ββ Aluminum Structural Supports
| Item | Detail |
|---|---|
| Base Duty Rate | 5.7% |
| Additional Duty (Section 301) | +0.0% |
| Section 122 Duty | +10.0% |
| Steel/Aluminum Additional | +50.0% |
| Total Effective Rate | 65.7% |
| Total Tax (from DATA) | 65.7% |
| Tax Details from DATA | Base: 5.7%, Additional: 0.0%, Section 122: 10%, Steel/Aluminum Additional: 50%. |
| Legal Basis | HTSUS 7610 (Aluminum Structures) |
π Explanation:
- Although base is lower, the 50% additional tariff on aluminum products pushes the total to 65.7%.
- This is higher than the general aluminum article (7616.99.51.50at 37.5%).
π οΈ IV. Customs Clearance Practical Advice (Strategic Pitfall Avoidance)
β 1. Documentation Checklist (Mandatory)
| Document | Required | Notes |
|---|---|---|
| Product Specification Sheet | β Yes | Must clearly state Material (Steel vs. Aluminum) and Finish (Galvanized, Anodized, etc.). |
| Material Test Report | β Yes | Crucial for distinguishing between 7326 (Steel) and 7616/7610 (Aluminum). |
| Commercial Invoice | β Yes | Describe as "Aluminum Tent Poles" or "Steel Tent Poles" accurately. Do not use vague terms like "Metal Rods". |
| Packing List | β Yes | Specify quantities per pole type. |
| Proof of Tent Compatibility | β Recommended | For 6306.22.90.30, provide evidence that poles are specifically designed for tents (e.g., snapped connectors, tent-specific lengths). |
β 2. Classification Strategy (Key Tips)
| Scenario | Recommended HS Code | Reason |
|---|---|---|
| Aluminum Poles | 7616.99.51.50 |
Lowest tax among aluminum options (37.5%). Avoid 7610 (65.7%) due to 50% surcharge. |
| Steel Poles | 7326.90.86.88 |
High tax (87.9%). Consider if no alternative exists. |
| Tent Kits (Poles + Fabric) | 6306.22.90.30 |
Lowest overall tax (26.3%) IF classified as tent parts. Best for complete tent imports. |
| Generic Steel Rods | 7326.19.00.80 |
Same high tax (87.9%) as other steel poles. |
β 3. Critical Warnings
- Material Misclassification: Declaring Steel as Aluminum to save taxes is fraud. Customs can audit material composition. If tested and found to be steel, you will pay the 87.9% rate + penalties.
- "Tent Parts" Argument: Using
6306.22.90.30requires that the poles are not sold separately as general hardware. If imported as bulk loose poles for general construction, this classification may be rejected. - Section 232 Impact: The 50% additional tariff on steel/aluminum products under Section 122/232 is a major cost driver. Ensure your HS code aligns with the specific US CBP rulings on "structural parts" vs. "general articles."
π V. Global Market Comparison (2026)
| Market | Recommended HS Code | Est. Total Tax Rate | Notes |
|---|---|---|---|
| πΊπΈ USA | 6306.22.90.30 (if tent parts) |
26.3% | Best for complete tents. 7616.99.51.50 (37.5%) for Aluminum poles. 7326 (87.9%) for Steel. |
| π¨π³ China | 7326/7616 |
Variable (Low) | Export duties may apply. Import to China for re-export may have different rules. |
| πͺπΊ EU | 7326/7610 |
Varies (Usually 0-5%) | EU generally does not have Section 301/232 equivalents. Verify local VAT and anti-dumping duties. |
| π¬π§ UK | 7326/7610 |
Varies (Usually 0-5%) | Post-Brexit rules. Generally lower than US. |
π Conclusion:
- The US market is the most challenging due to high additional tariffs.
- Aluminum poles (7616.99.51.50) are significantly cheaper to import than Steel poles.
- Tent Parts (6306.22.90.30) offer the lowest entry point but require strict justification.
π VI. Common Mistakes & Pitfalls
β Mistake 1: Classifying Steel Poles as Aluminum
π Result: 87.9% vs 37.5%. If caught, 100% penalty + Back Taxes.
β Mistake 2: Importing Steel Poles as "General Hardware" to Avoid Section 232
π Result: CBP may reclassify under 7326 with 50% additional duty. Total 87.9%.
β Mistake 3: Using 6306 for Loose Poles Sold Separately
π Result: Customs may reject "Tent Part" classification, forcing reclassification to 7326 or 7616 with higher duties.
β Correct Approach:
"Aluminum Tent Poles, Anodized, 30cm Lengths, for Camping Tents" β
7616.99.51.50
"Complete Tent Kit with Aluminum Poles" β6306.22.90.30
π― VII. Conclusion: Professional Classification, Cost Efficiency!
π― Key Takeaway:
πΉ Aluminum is cheaper than Steel (37.5% vs 87.9%).
πΉ Tent Parts classification is cheapest (26.3%) if applicable.
πΉ Always verify material before declaring.
π Pro Tip:
If you are exporting to the US, consider sourcing Aluminum poles or importing complete tents to leverage the lower
6306rate. Avoid Steel poles unless absolutely necessary due to the 87.9% effective rate.
π£ Immediate Action:
π Consult a Customs Broker: Get a pre-classification ruling for your specific product.
π¦ Label Clearly: Ensure invoices and packages clearly state material and intended use.
π Optimize Supply Chain: Shift to Aluminum or Complete Tent Kits to reduce duty burden.
β¨ Precise Classification = Maximized Profit!
πΌ Don't Let Tariffs Eat Your Margins!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.