Thread Processing Tools
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 7326908605 | 87.9% | CN | US | Official Doc |
| 7326908688 | 87.9% | CN | US | Official Doc |
| 8205595510 | 40.3% | CN | US | Official Doc |
| 8205591000 | 42.2% | CN | US | Official Doc |
| 7326908605 | 87.9% | CN | US | Official Doc |
Product Images
AI Analysis
π οΈ Thread Processing Tools (Bolt Rust Removal Tools)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Entry Strategies
π I. Product Definition & Classification: Do You Really Understand "Thread Processing Tools"?
"Thread Processing Tools," specifically identified as Bolt Rust Removal Tools, are specialized hand tools used in maintenance, automotive repair, and industrial manufacturing to clean corrosion from bolts, nuts, and threaded fasteners.
In international trade, these tools are classified based on two primary factors: 1. Material Composition: Are they made of Iron/Steel (generic metalεΆε) or Steel (specific alloy)? 2. Functionality: Are they classified as General Metal Articles (Chapter 73) or Hand Tools (Chapter 82)?
β οΈ Critical Distinction:
- If the tool is viewed as a simple metal article (e.g., a specialized scraper or brush without a distinct "cutting edge" mechanism like a chisel or screwdriver) β It falls under Chapter 73 (Articles of Iron or Steel).
- If the tool is viewed as a hand tool with a functional edge or gripping mechanism designed for manual operation β It falls under Chapter 82 (Tools, Implements, etc.).
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Application Scenario | Material/Type |
|---|---|---|---|
7326.90.86.05 |
Other articles of iron or steel, not specified elsewhere | Rust removal tools inferred as Iron/Steel articles; general metal tools. | π¨π³ Iron/Steel |
7326.90.86.88 |
Other articles of iron or steel, not specified elsewhere | Rust removal tools inferred as Iron/Steel articles; fallback classification. | π¨π³ Iron/Steel |
8205.59.55.10 |
Other hand tools, with cutting edge, not specified elsewhere | Rust removal tools inferred as Hand Tools; metal (iron/steel) with functional edges. | π¨π³ Metal Hand Tool |
8205.59.10.00 |
Other hand tools, with cutting edge, not specified elsewhere | Rust removal tools inferred as Hand Tools; standard metal hand tool category. | π¨π³ Metal Hand Tool |
π Key Insight:
- Chapter 73 Codes (7326...): Apply if the tool is considered a "miscellaneous metal article" rather than a standard hand tool. This path is often used for tools with less complex mechanics (e.g., wire brushes, scrapers).
- Chapter 82 Codes (8205...): Apply if the tool is strictly defined as a "hand tool" with a functional edge. This is the more common classification for precision bolt cleaning tools.
π° III. 2026 Latest Tariff Rate Breakdown (Including Surtaxes & Policy Surcharges)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Date: Current rates apply (Section 301 & Section 122/232 implications)
π― 1. Classification: General Metal Articles (Chapter 73)
Codes: 7326.90.86.05 & 7326.90.86.88
| Item | Content |
|---|---|
| Base Duty Rate | 2.9% (ad valorem) |
| Section 301 Surtax | +25.0% (Standard China Surcharge) |
| Section 122/Steel Aluminum Surtax | +50.0% (Specific to Steel/Aluminum/Copper articles under certain provisions) |
| Total Tax Rate | 87.9% |
| Tax Calculation | CIF Value Γ 87.9% |
| De Minimis Exemption | β Not Applicable |
| Legal Basis Path | Base Tariff: 2.9% β Sec 301: +25% β Sec 122/Steel: +50% |
π Explanation:
- This is the HIGHEST tariff bracket for these tools.
- The 50% surcharge is critical here. If customs determines the tool is primarily Steel and subject to the Section 232/122 broad steel tariffs, the total duty skyrockets to 87.9%.
- Risk: High risk of audit if declared as "miscellaneous steel articles" without clear justification for the lower Chapter 82 classification.
π― 2. Classification: Hand Tools (Chapter 82)
Codes: 8205.59.55.10 & 8205.59.10.00
| HS Code | Base Rate | Sec 301 Surcharge | Total Tax Rate |
|---|---|---|---|
8205.59.55.10 |
5.3% | +25.0% (Sec 301) + 10% (Sec 122/Other) | 40.3% |
8205.59.10.00 |
7.2% | +25.0% (Sec 301) + 10% (Sec 122/Other) | 42.2% |
π Note:
- These codes benefit from a significantly lower total duty rate (~40-42%) compared to the Chapter 73 codes (87.9%).
- The 10% surcharge mentioned in the data (122ζ‘ζ¬Ύε ³η¨10%) likely refers to a specific provision or a reduced rate for non-steel-specific hand tools, or a different section interpretation.
- Recommendation: If the tool is functionally a hand tool (e.g., has a handle, is operated by hand, has a specific mechanical function), Chapter 82 is strongly preferred to save ~45-47% in duties.
π οΈ IV. Customs Clearance Operational Advice (Practical Pitfall Guide)
β 1. Preparation Checklist (Non-negotiable)
| Document | Required | Purpose |
|---|---|---|
| β Product Specifications | βοΈ | Detail: Material (e.g., "Carbon Steel"), Dimensions, Handle Type. |
| β Photos (Clear & Labeled) | βοΈ | Must show the tool head clearly. If it looks like a screwdriver/wrench, argue for Ch 82. If it looks like a wire brush/scraper, Ch 73 might apply but be careful of the 50% steel tax. |
| β Commercial Invoice | βοΈ | Description: "Hand Tool for Bolt Cleaning" (for Ch 82) vs. "Steel Scraper" (for Ch 73). Terminology matters! |
| β Material Certificate | βοΈ | Proves if the steel is "Steel" (triggering 50%) or "Iron" (lowering risk of specific steel surcharges). |
| β Origin Certificate | βοΈ | To confirm China origin and apply appropriate Section 301 rates. |
β 2. Declaration Strategy (Key Formulas)
π₯ "Function First, Material Second, Name Precision Saves Money!"
| Scenario | Correct HS Code | Reasoning | Risk |
|---|---|---|---|
| Tool with Handle + Functional Edge | 8205.59.55.10 or 8205.59.10.00 |
Defined as a Hand Tool. Lower total tax (40-42%). | Low if function is clear. |
| Wire Brush / Simple Scraper | 7326.90.86.05 |
Defined as Metal Article. Higher tax (87.9%) due to 50% steel surcharge. | HIGH COST. Avoid if possible. |
| Mixed Kit (Brush + Handle) | 8205... |
Argue as a Complete Hand Tool System. | Requires strong justification. |
π Expert Tip:
- Do NOT describe the product simply as "Steel Tool."
- DO describe it as "Manual Hand Tool for Fastener Maintenance" if using Chapter 82.
- If using Chapter 73, be prepared for the 87.9% total duty. Calculate if the margin allows for this cost.
β 3. Special Cases
| Situation | Handling Advice |
|---|---|
| OEM Tools | Provide design drawings showing the ergonomic handle and functional head to support Chapter 82 classification. |
| Material Ambiguity | If the tool is made of Stainless Steel, the 50% steel surcharge might be contested. Provide material proof. |
| Packaging | Ship as complete units. Do not ship "handle" and "head" separately, as this may lead toζεη³ζ₯ (split declaration) and higher taxes. |
π V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Estimated Total Duty | Key Requirement |
|---|---|---|---|
| πΊπΈ USA | 8205.59.55.10 |
40.3% | Best Option (Saves ~47% vs Ch 73) |
| πΊπΈ USA | 7326.90.86.05 |
87.9% | Avoid (High steel surcharge) |
| π¨π³ China | 8205.59.55.10 |
~5-7% | CCC/CQC Certification |
| πͺπΊ EU | 8205.59.55.10 |
~6.5% | CE Marking |
π Conclusion:
- For the US Market, the choice between Chapter 73 and Chapter 82 results in a 47% difference in duty costs.
- Always aim for Chapter 82 if the tool is manually operated and has a functional design.
- Chapter 73 is a trap for steel items due to the additional 50% surcharge.
π VI. Common Mistakes & Pitfall Guide (Lessons Learned)
β Mistake 1: Declaring "Bolt Cleaner" under 7326.90.86.05 without justification.
π Consequence: Pay 87.9% duty.
π Solution: Argue for 8205 classification as a "Hand Tool."
β Mistake 2: Claiming the tool is "Iron" to avoid "Steel" surcharges, but material test shows "Steel."
π Consequence: Customs seizure, fines, and back-taxes.
π Solution: Use accurate material descriptors (e.g., "Carbon Steel").
β Mistake 3: Ignoring the Section 301 + Section 122/232 layered taxes.
π Consequence: Budget miscalculation.
π Solution: Always calculate Total Landed Cost = CIF + Base Tariff + Sec 301 + Sec 122/232.
β Correct Declaration Example:
"Manual Hand Tool for Rust Removal, Made of Carbon Steel, With Ergonomic Handle, Model XYZ"
HS Code:8205.59.55.10
Duty: 40.3%
π― VII. Conclusion: Precise Classification, Maximum Savings!
π― Remember the Golden Rule:
πΉ "Hand Tool (Ch 82) = ~40% Duty"
πΉ "Steel Article (Ch 73) = ~88% Duty"
πΉ "Difference is HUGE. Choose Ch 82 if functionally justified!"
π Pro Tip:
If your supplier provides the tools under a different HS Code, verify it yourself. Customs brokers may default to the "easiest" code (Ch 73), which is often the most expensive.
π Proactively argue for Chapter 82 with photos and specs to save nearly half your duty costs.
β¨ Professional Clearance Starts with Precise Classification!
πΌ Every Percent Saved is Pure Profit!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.