Tight Wood Hoops
CN β USAI Analysis
πͺ΅ Tight Wood Hoops (Solid Wood Rings/Tunnels)
π HS Code Reference & Clearance Guide | 2026 Latest Tariff Analysis | Professional Customs Strategy
π 1. Product Definition & Classification: What Exactly are "Tight Wood Hoops"?
"Tight Wood Hoops" typically refer to cylindrical or ring-shaped wooden components that fit tightly into a bore, groove, or housing. In international trade, their classification depends heavily on their primary use and material composition. They are not a single standalone HS code but are categorized based on their end-use.
Two Main Categories:
- Industrial/Mechanical Parts: Used as bushings, bearings, spacers, or sleeves in machinery, engines, or pumps.
- General Wooden Articles: Used in crafts, furniture making, decorations, or construction (e.g., decorative rings, barrel hoops).
β οΈ Key Distinction:
- If the hoop is a functional mechanical part (e.g., a wooden bearing sleeve) β It may fall under Chapter 84 (Machinery parts) or Chapter 39/85 if composite.
- If it is a simple wooden article for construction, craft, or general use β It falls under Chapter 44 (Wood and wood articles).
- If it is made of bamboo instead of wood β It falls under Chapter 47 or 44 depending on processing.
π¦ 2. HS Code Classification Details (2026 Latest Tariff Authority)
| HS Code | Product Description | Application Scenario | Material/Feature |
|---|---|---|---|
4401.12.00.00 |
Wood, in rounds or halved rounds | Raw timber rounds, not yet processed into hoops | Raw wood |
4401.22.00.00 |
Wood, in chips, shavings | Waste/scraps | Waste |
4401.31.00.00 |
Wood, in pellets/briquettes | Fuel | Compressed wood |
4407.10.00.00 |
Wood sawn lengthwise, thickness >6mm, veneered | Pre-cut wood blanks for hoops | Sawn wood |
4407.91.00.00 |
Wood sawn lengthwise, thickness >6mm, other species | Non-decaduous wood blanks | Sawn wood |
4407.99.00.00 |
Wood sawn lengthwise, thickness >6mm, other | Other wood blanks | Sawn wood |
4408.31.00.00 |
Wood veneers, for plywood | Veneer sheets, not hoops | Veneer |
4408.39.00.00 |
Wood veneers, other | Other veneers | Veneer |
4408.90.00.00 |
Wood veneers, other species | Other veneers | Veneer |
4408.91.00.00 |
Wood veneers, of other species, for plywood | Plywood veneer | Veneer |
4408.99.00.00 |
Wood veneers, other | Other veneers | Veneer |
4409.10.00.00 |
Wood continuously shaped along length (including tongued, grooved) | Profiled wood, including simple rings if shaped | Shaped wood |
4409.21.00.00 |
Wood continuously shaped along length, of deciduous wood | Shaped wood, deciduous | Shaped wood |
4409.29.00.00 |
Wood continuously shaped along length, of other wood | Shaped wood, non-deciduous | Shaped wood |
4412.10.00.00 |
Plywood, veneer panels, similar laminated wood | Plywood sheets | Plywood |
4412.13.00.00 |
Plywood, sheets of other wood | Other plywood | Plywood |
4412.14.00.00 |
Plywood, of bamboo | Bamboo plywood | Bamboo |
4412.31.00.00 |
Plywood, of other wood, at least one outer ply of non-deciduous wood | Plywood | Plywood |
4412.39.00.00 |
Plywood, of other wood, other | Plywood | Plywood |
4412.94.00.00 |
Plywood, of other wood, of bamboo | Bamboo plywood | Bamboo |
4412.99.00.00 |
Plywood, of other wood, other | Plywood | Plywood |
4412.94.00.00 |
Plywood, of other wood, of bamboo | Bamboo plywood | Bamboo |
4412.99.00.00 |
Plywood, of other wood, other | Plywood | Plywood |
4414.00.00.00 |
Wooden frames for paintings, photographs, mirrors, or similar | Decorative wooden frames | Wood |
4415.20.00.00 |
Crate, drums, similar packings, of wood; cable-drums of wood | Wooden drums/cables | Wood |
4415.20.00.00 |
Crate, drums, similar packings, of wood; cable-drums of wood | Wooden drums/cables | Wood |
4416.00.00.00 |
Casks, drums, cask-shells, and other hollow wood products | Wooden barrels, hoops for barrels | Wood |
4421.91.00.00 |
Wooden clothes-hangers | Hangers | Wood |
4421.99.00.00 |
Other articles of wood | Miscellaneous wooden items | Wood |
8483.60.00.00 |
Gear wheels and other transmission components presented separately | Mechanical parts, if wooden gear | Machine part |
8483.90.00.00 |
Parts of transmission shafts, bearings, gears | Machine parts, if wooden bearing | Machine part |
π Key Reminder:
- If the hoop is a simple wooden ring for decoration or general use, it is most likely classified under4416.00.00.00(Hollow wood products) or4421.99.00.00(Other articles of wood).
- If it is a shaped wood profile (e.g., with tongues/grooves for fitting), it may fall under4409.29.00.00.
- If it is a mechanical part (e.g., a wooden bushing in a machine), it may fall under8483.90.00.00.
- Avoid misclassification: Do not classify a simple wooden ring as a "machine part" unless it is explicitly designed for mechanical transmission/bearing in a machine.
π° 3. 2026 Latest Tariff Rate Details (Including Additional Taxes & Policy Add-ons)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Date: November 10, 2025 onwards (including subsequent imports)
π― 1. 4416.00.00.00 ββ Hollow Wood Products (e.g., Wooden Barrels, Hoops)
| Item | Content |
|---|---|
| Base Tariff Rate | 0% (ad valorem) |
| USITC Additional Tariff | +25% (from USITC Footnote 9903.88.01) |
| IEEPA Additional Tariff | +10% (for China/HK products, from Nov 10, 2025) |
| Total Tariff Rate | 45% |
| Tax Calculation | CIF Value Γ 45% |
| De Minimis Exemption Eligible? | β No (deny_de_minimis) |
| Legal Basis Path | IEEPA:9903.01.25 β IEEPA:9903.01.24 β USITC:4416.00.00.00 β FOOTNOTE:9903.88.01 |
π Explanation:
- The 25% USITC Additional Tariff is from Section 301 of the US Trade Act;
- The 10% IEEPA Additional Tariff is theε―Ήεε εΎε ³η¨ under the International Emergency Economic Powers Act;
- Total 45%, a very high tariff, must be anticipated in advance!
π― 2. 4421.99.00.00 ββ Other Articles of Wood
| Item | Content |
|---|---|
| Base Tariff Rate | 0% |
| USITC Additional Tariff | +25% |
| IEEPA Additional Tariff | +10% |
| Total Tariff Rate | 45% |
| Tax Calculation | CIF Γ 45% |
| De Minimis Exemption Eligible? | β No |
| Legal Basis Path | IEEPA:9901.25 β IEEPA:9903.01.24 β USITC:4421.99.00.00 β FOOTNOTE:9903.88.01 |
π Note:
- Same as above, all "wooden articles" from China are subject to high tariffs;
- Even if it is a "craft wooden ring" or "decorative hoop," as long as it is made in China, it is subject to this tariff.
π― 3. 8483.90.00.00 ββ Parts of Transmission Shafts, Bearings, Gears (If Applicable)
| Item | Content |
|---|---|
| Base Tariff Rate | 0% |
| USITC Additional Tariff | +25% |
| IEEPA Additional Tariff | +10% |
| Total Tariff Rate | 45% |
| Tax Calculation | CIF Γ 45% |
| De Minimis Exemption Eligible? | β No |
| Legal Basis Path | IEEPA:9901.25 β IEEPA:9903.01.24 β USITC:8483.90.00.00 β FOOTNOTE:9903.88.01 |
π Note:
- Only applies if the wooden hoop is explicitly a mechanical part (e.g., wooden bearing sleeve);
- If it is a simple decorative hoop, do not use this code.
π οΈ 4. Clearance Practical Advice (Battlefield Pit-Avoidance Guide)
β 1. Required Document List (No omissions)
| Document | Must Provide | Description |
|---|---|---|
| β Product Specification Sheet | βοΈ | Includes dimensions, outer/inner diameter, wood species, thickness |
| β Product Photos (with label) | βοΈ | Clear images of the hoop, showing shape, texture, and any markings |
| β Third-Party Test Report | βοΈ | FSC (Forest Stewardship Council) certificate is critical for wood products |
| β Commercial Invoice | βοΈ | Must clearly state "Wooden Hoop, Solid Wood, for [Specific Use]" |
| β Packing List | βοΈ | Detail weight, quantity, and packaging method |
| β Certificate of Origin (CO) | βοΈ | If not from China, apply for preferential tariff |
| β FSC Certificate | βοΈ | Critical for wood products to prove sustainable sourcing |
β 2. Declaration Skills (Key Mantra)
π₯ "Specify Use, Identify Wood, Avoid Misclassification!"
| Situation | Correct Declaration | Wrong Practice |
|---|---|---|
| Simple decorative wooden hoop | 4416.00.00.00 or 4421.99.00.00 |
Misclassified as "machine part" β 45% |
| Wooden hoop for barrel making | 4416.00.00.00 |
Misclassified as "plywood" β 0% (but high risk of audit) |
| Wooden bearing sleeve | 8483.90.00.00 |
Misclassified as "decorative hoop" β 45% |
| Bamboo hoop | 4412.94.00.00 or 4416.00.00.00 |
Misclassified as "wood" β Penalty |
β 3. Special Cases Handling
| Situation | Handling Advice |
|---|---|
| OEM Custom Wooden Hoops | Provide customer order + design drawings, avoid being deemed "non-standard" |
| Wooden Hoops for Musical Instruments | If used in drums, may be classified under 9209.99.00.00 (Parts of musical instruments), but requires proof |
| Wooden Hoops for Construction | If used in scaffolding, may be classified under 4407.10.00.00 |
| Wooden Hoops for Crafts | If used in jewelry or small crafts, classify under 4421.99.00.00 |
π 5. Global Major Market Clearance Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff | Certification Requirements | Remarks |
|---|---|---|---|---|
| πΊπΈ United States | 4416.00.00.00 |
45% (China origin) | FSC + RoHS | High tariff |
| π¨π³ China | 4416.00.00.00 |
5% | CCC (if applicable) | No additional tax |
| πͺπΊ EU | 4416.00.00.00 |
0% (if FSC) | CE + FSC | No additional tax |
| π¦πΊ Australia | 4416.00.00.00 |
5% | RCM | No additional tax |
| π―π΅ Japan | 4416.00.00.00 |
0% | PSE | No additional tax |
π Conclusion:
- The United States is the only market that imposes high additional tariffs on wooden products from China;
- Clearance costs for Chinese wooden hoops in the US are extremely high. It is recommended to evaluate in advance whether to transfer production or adjust the supply chain.
π 6. Common Errors & Pit-Avoidance Guide (Blood and Tears Lessons)
β Error 1: Classifying a simple wooden hoop as a "machine part"
π Consequence: Tariff increases from 45% to 45% (no change, but high audit risk) β Delayed clearance or return
β Error 2: Classifying a wooden hoop as "plywood"
π Consequence: Tariff is 0%, but audit found it was not plywood β Penalty + Back Tax
β Error 3: Not providing FSC certificate
π Consequence: Customs may block entry β Return or destroy
β Error 4: Using "Wooden Ring" as the declaration name without specifying use
π Consequence: Customs cannot determine the correct code β Delayed clearance
β Correct Practice:
"Solid Wood Hoop, Diameter 10cm, Thickness 1cm, Species: Oak, for Decorative Use, FSC Certified"
π― 7. Conclusion: Professional Declaration, Save Time and Money!
π― Remember the Mantra:
πΉ "Specify Use, Identify Wood, FSC is Key, Tariff is 45% in US"
πΉ "HS Code determines life, tariff difference 45 points, declaration difference one step, tax up thousands"
π Tips:
If your wooden hoop is originally from Vietnam, Mexico, Thailand, Malaysia, you can apply for IEEPA exemption, tariff is only 0%~5%;
It is recommended to apply for Advance Ruling in advance to avoid clearance risks.
π£ Take Action Immediately:
π Contact a professional customs broker + Provide product photos + Apply for HS Code Advance Ruling
π Let your wooden hoops clear customs smoothly, go global efficiently, and double profits!
β¨ Professional clearance, starting from accurate classification!
πΌ Every penny of your cost deserves to be precisely calculated!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.