Tool Holder
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 8207906000 | 39.3% | CN | US | Official Doc |
| 8207907585 | 38.7% | CN | US | Official Doc |
| 8466100175 | 13.9% | CN | US | Official Doc |
| 8466100130 | 38.9% | CN | US | Official Doc |
Product Images
AI Analysis
π§ Tool Holders & Self-Opening Dieheads (Parts for Machine Tools)
π HS Code Reference & Customs Clearance Guide | 2024-2026 Latest Tariff Analysis | Professional Tiered Strategy
π I. Product Definition: Are You Holding the Right Code?
Tool Holders are specialized accessories designed to secure cutting tools (such as drills, mills, or inserts) in machine tools (headings 8456 to 8465). However, not all "holders" are created equal in customs classification. The key distinction lies in compatibility and design:
- Holders for Replaceable Cutting/Drill Inserts (HS 8466.10.01.30): These are specifically designed to hold standardized inserts (e.g., indexable carbide inserts). They have precise geometries for clamping specific insert shapes.
- Other Tool Holders / Self-Opening Dieheads (HS 8466.10.01.75): This is the "catch-all" for holders that do not fit the specific insert design above. This includes collets, chucks, universal tool holders, and dieheads used for threading or tapping that aren't insert-specific.
β οΈ Critical Distinction Point:
- If the holder is explicitly designed for replaceable cutting inserts (like a standard milling cutter body or drill chuck accepting insert tips) β HS 8466.10.01.30
- If it is a general-purpose holder, collet system, or diehead not for inserts β HS 8466.10.01.75
π¦ II. HS Code Classification Details (Based on Provided Data)
| HS Code | Product Description | Key Characteristics | Tax Rate (Total) |
|---|---|---|---|
8466.10.01.75 |
Tool holders and self-opening dieheads: Other | General tool holders, chucks, collets, dieheads not for inserts | 0.0% |
8466.10.01.30 |
Tool holders and self-opening dieheads: Holders for replaceable cutting or drill inserts | Specifically designed to clamp indexable inserts | 28.9% |
π Important Note:
- The data provided only covers the two sub-categories under Heading 8466.10.
- Do not confuse these with interchangeable tools for handtools (Heading 8207), such as drill bits for handheld drills. Those fall under8207.90.60.00(29.3%) or8207.90.75.85(28.7%), which are not "tool holders" in the machine-tool sense.
π° III. Tariff Rate Breakdown (Detailed Tax Explanation)
β Scope: Based on the provided dataset (likely US market context due to "additional tariffs").
β Origin: China (CN) assumed for "additional tariff" application.
β Effective Date: Current rates apply as per the provided text.
π― 1. 8466.10.01.75 ββ General Tool Holders & Dieheads (Not for Inserts)
| Item | Details |
|---|---|
| Product Description | Other tool holders and self-opening dieheads |
| Base Tariff | 0.0% |
| Additional Tariff (Section 301/Other) | 0.0% |
| Total Tax Rate | 0.0% |
| Calculation | CIF Value Γ 0.0% = $0 Tax |
| Key Insight | This is a duty-free entry for general machine tool holders (e.g., collets, Weldon chucks, non-insert-specific tapers). |
π Explanation:
- The "Other" category in 8466.10.01.75 is classified as essential general-purpose tooling, attracting zero additional penalties in this specific dataset.
- Strategy: If your product can be argued as "not specifically for inserts" (e.g., a universal taper adapter), this 0% rate is significantly cheaper than the 28.9% alternative.
π― 2. 8466.10.01.30 ββ Holders for Replaceable Cutting/Drill Inserts
| Item | Details |
|---|---|
| Product Description | Holders for replaceable cutting or drill inserts |
| Base Tariff | 3.9% |
| Additional Tariff | 25.0% |
| Total Tax Rate | 28.9% |
| Calculation | CIF Value Γ 28.9% = High Tax Liability |
| Key Insight | This category is heavily taxed due to its specific industrial application and potential trade restrictions. |
π Explanation:
- Base Tariff (3.9%): The standard MFN (Most Favored Nation) duty for this specific sub-heading.
- Additional Tariff (25.0%): Likely reflects Section 301 tariffs or other punitive levies on Chinese-origin machinery parts.
- Combined Impact: A $10,000 shipment incurs $2,890 in duties. This is a massive cost difference compared to the 0% category.
π οΈ IV. Customs Clearance & Classification Strategy
β 1. How to Choose the Right HS Code?
| Scenario | Correct HS Code | Why? |
|---|---|---|
| Insert Milling Holder | 8466.10.01.30 |
Designed to clamp indexable inserts (e.g., CNMG, WNMG). |
| Drill Chuck for CNC Lathe | 8466.10.01.75 |
Not for "inserts"; it holds solid tools or shanks. |
| Collet Chuck (ER/BT) | 8466.10.01.75 |
Holds solid shank tools, not replaceable inserts. |
| Self-Opening Diehead | 8466.10.01.75 |
Threading tool, not an insert holder. |
| Hand Drill Bit | NOT 8466 | This is an "interchangeable tool" for hand tools β 8207.90.60.00. |
β 2. Documentation Required for Clearance
| Document | Requirement | Purpose |
|---|---|---|
| Commercial Invoice | Must specify "Tool Holder" or "Diehead" | Avoids vague descriptions like "Machine Part" |
| Technical Drawing | Critical for proving "Insert vs. Non-Insert" | Proves geometry is not for standard inserts if claiming 0% |
| Product Photos | Clear view of clamping mechanism | Shows if it uses a screw/clamp for an insert or a collet/shank |
| Material Spec | Steel, Carbide, etc. | For general description, though less critical for tax than function |
β 3. Critical Warnings & Pitfalls
π« Pitfall 1: Misclassifying Insert Holders as "Other"
- Risk: If you declare an insert holder as8466.10.01.75(0%), customs may audit, reclassify to8466.10.01.30(28.9%), and charge back duties + penalties.
- Advice: Only use 0% if the holder cannot physically accept a standard replaceable insert.π« Pitfall 2: Confusing with Hand Tool Accessories (8207)
- Risk: Declaring a CNC tool holder as "hand tool part" (8207.90.60.00) is incorrect because it is "suitable for use solely or principally with machines of 8456-8465".
- Advice: Ensure your product is for machine tools (CNC, milling, turning), not handheld drills/grinders.π« Pitfall 3: Overlooking "Self-Opening Dieheads"
- Risk: These are often overlooked. If you import dieheads, they fall under 8466.10.01.75 (0%), not 8207.
- Advice: Explicitly list "Self-Opening Diehead" on the invoice.
π V. Global Market Comparison (2024-2026 Context)
| Market | HS Code | Base Rate | Additional Tariff (China) | Total | Notes |
|---|---|---|---|---|---|
| πΊπΈ USA | 8466.10.01.30 |
3.9% | 25.0% | 28.9% | High barrier for insert holders. |
| πΊπΈ USA | 8466.10.01.75 |
0.0% | 0.0% | 0.0% | Duty-free for general holders. |
| πͺπΊ EU | 8466.10 |
~4.5% | 0% | ~4.5% | No Section 301 equivalent. |
| π¨π³ China | 8466.10 |
~5-10% | N/A | Varies | Import duty for foreign holders. |
π Conclusion:
The 28.9% vs 0.0% gap is the most critical decision point for US imports.
- If your holder is generic (collets, chucks, tapers), fight for8466.10.01.75.
- If it is for inserts, you must pay 28.9% or explore duty drawback programs.
π VI. Actionable Checklist for Importers
- Audit Your Product: Does it clamp an insert?
- Yes β
8466.10.01.30(28.9%) - No β
8466.10.01.75(0.0%) - Verify Origin: Is it made in China?
- Yes β Additional tariffs apply.
- No (e.g., Taiwan, Korea) β Check if additional tariffs are waived.
- Prepare Technicals: Have drawings ready to prove the clamping mechanism is not for standard inserts if claiming 0%.
- Consult a Broker: For large volumes, apply for a Binding Ruling to lock in the 0% classification for general holders.
π― VII. Final Recommendation
π₯ "Insert Holders Pay 28.9%, General Holders Pay 0%!"
π₯ "Don't misclassify β Customs will catch the difference!"
β
Pro Tip:
If you supply both types, clearly separate them in your invoice and packing list. Do not bundle insert holders with general holders to avoid ambiguity.
π Need Help?
Provide product photos and specs to your customs broker to confirm if your "holder" is truly "Other" (0%) or "Insert Holder" (28.9%).
β¨ Accurate Classification = Cost Savings!
πΌ Don't let a 28.9% tariff eat your margins!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.