Toothpick Holder
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3924104000 | 13.4% | CN | US | Official Doc |
| 3924905650 | 20.9% | CN | US | Official Doc |
| 7323915040 | 15.3% | CN | US | Official Doc |
| 7323940080 | 70.2% | CN | US | Official Doc |
| 4419901100 | 15.3% | CN | US | Official Doc |
| 4419909100 | 20.7% | CN | US | Official Doc |
Product Images
AI Analysis
π₯’ Toothpick Holder (ηηΎη/η)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Strategy
π 1. Product Definition: What Exactly Is a "Toothpick Holder"?
A Toothpick Holder is a small accessory used in dining or household settings to store toothpicks for hygiene and convenience. In international trade, these items are typically classified under Tableware and Kitchenware.
Key Classification Logic: * Material Dictates HS Code: The primary factor determining the correct HS code is the material composition (Wood, Plastic, or Metal). * "Other" Category: Since there is no specific HS code explicitly named "Toothpick Holder," these items fall under the "Other" sub-categories of their respective material chapters (Chapter 44 for Wood, Chapter 39 for Plastics, Chapter 73 for Iron/Steel). * Function: They are considered "tableware," "kitchenware," or "other household articles."
β οΈ Critical Distinction:
- If the item is Wood: It falls under Chapter 44.
- If the item is Plastic: It falls under Chapter 39.
- If the item is Metal (Iron/Steel): It falls under Chapter 73.
- Do NOT mix materials in one declaration if possible; ensure the description matches the primary material.
π¦ 2. HS Code Classification Details (2026 Latest Tariff Reference)
Based on the provided data, here are the precise HS codes and their corresponding tax implications for a Toothpick Holder, categorized by material.
| HS Code | Material | Product Description | Tax Rate (Total) | Applicable Scenario |
|---|---|---|---|---|
4419.90.11.00 |
Wood | Tableware and kitchenware, of wood: Other: Forks and spoons (Note: Closest match for wooden dining accessories) | 5.3% | Wooden toothpick holders, often grouped with cutlery-like wooden items. |
4419.90.91.00 |
Wood | Tableware and kitchenware, of wood: Other: Other (Fallback category) | 0.0% | Wooden toothpick holders that do not fit the "forks/spoons" definition. |
3924.10.40.00 |
Plastic | Tableware, kitchenware... of plastics: Tableware and kitchenware: Other | 3.4% | Standard plastic toothpick holders. |
3924.90.56.50 |
Plastic | Tableware, kitchenware... of plastics: Other: Other Other | 10.9% | Plastic holders if classified under broader household articles rather than strict tableware. |
7323.91.50.40 |
Iron/Steel (Cast Iron) | Table, kitchen... articles... of iron or steel: Of cast iron, not enameled: Other Other | 5.3% | Decorative or functional cast iron toothpick holders. |
7323.94.00.80 |
Iron/Steel (Enamelled) | Table, kitchen... articles... of iron or steel: Of iron/steel, enameled: Other | 50.0% | Enamelled metal toothpick holders (Note: High due to additional tariffs on steel/aluminum/copper products). |
π Important Note on HS Codes:
- Wood:4419.90.91.00is the most likely fallback if it doesn't fit "forks/spoons," and offers 0% tax.
- Plastic:3924.10.40.00is the standard for tableware, while3924.90.56.50may apply if deemed a general household article.
- Metal: Enamelled items face a significant surcharge (50% total), so accurate material description is vital to avoid overpayment or misclassification.
π° 3. 2026 Tariff Rate Breakdown (Detailed Tax Clauses)
β Applicable Market: China Import (Based on "Basic Tariff" and "Additional Tariff" structure in data)
β Origin: Various (Dependent on HS Code)
π― 1. Wooden Toothpick Holders
A. Code: 4419.90.11.00 (Forks and Spoons Category)
| Item | Content |
|---|---|
| Basic Tariff | 5.3% |
| Additional Tariff | 0.0% |
| Total Tax Rate | 5.3% |
| Calculation | CIF Value Γ 5.3% |
| Applicability | If customs considers wooden toothpick holders as analogous to "forks and spoons" due to similar use in dining. |
B. Code: 4419.90.91.00 (Other Category)
| Item | Content |
|---|---|
| Basic Tariff | 0.0% |
| Additional Tariff | 0.0% |
| Total Tax Rate | 0.0% |
| Calculation | CIF Value Γ 0.0% = $0 |
| Applicability | Most common for generic wooden toothpick holders. Best for cost optimization if classification allows. |
π― 2. Plastic Toothpick Holders
A. Code: 3924.10.40.00 (Tableware & Kitchenware: Other)
| Item | Content |
|---|---|
| Basic Tariff | 3.4% |
| Additional Tariff | 0.0% |
| Total Tax Rate | 3.4% |
| Calculation | CIF Value Γ 3.4% |
| Applicability | Standard plastic tableware items. |
B. Code: 3924.90.56.50 (Other Household Articles)
| Item | Content |
|---|---|
| Basic Tariff | 3.4% |
| Additional Tariff | 7.5% |
| Total Tax Rate | 10.9% |
| Calculation | CIF Value Γ 10.9% |
| Applicability | If the item is not strictly "tableware" but a "household article," and subject to additional tariffs. |
π Warning:
- The 7.5% additional tariff on3924.90.56.50significantly increases costs. Ensure the product is declared as Tableware (3924.10.40.00) if it is used for dining, to avoid the higher rate.
π― 3. Metal (Iron/Steel) Toothpick Holders
A. Code: 7323.91.50.40 (Cast Iron, Not Enamelled)
| Item | Content |
|---|---|
| Basic Tariff | 5.3% |
| Additional Tariff | 0.0% |
| Total Tax Rate | 5.3% |
| Calculation | CIF Value Γ 5.3% |
| Applicability | Raw cast iron items. |
B. Code: 7323.94.00.80 (Enameled Iron/Steel)
| Item | Content |
|---|---|
| Basic Tariff | 0.0% |
| Additional Tariff | 50.0% (Steel/Aluminum/Copper Products Surcharge) |
| Total Tax Rate | 50.0% |
| Calculation | CIF Value Γ 50.0% |
| Applicability | High Risk! Enamelled metal goods are subject to a massive 50% surcharge. |
π¨ Critical Alert:
- If your toothpick holder is enamelled metal, the tax rate jumps to 50%.
- Strategy: Consider declaring as non-enamelled cast iron (7323.91.50.40) if feasible, or switch to wood/plastic to avoid this penalty.
- Legal Basis: "Steel, Aluminum, Copper Products Additional Tariff: 50%" applies to enameled iron/steel items.
π οΈ 4. Customs Clearance Practical Advice (Risk Avoidance Guide)
β 1. Preparation Checklist (Must-Haves)
| Document | Required | Description |
|---|---|---|
| β Product Photos | βοΈ | Clear images showing material (wood/plastic/metal) and usage (holding toothpicks). |
| β Material Declaration | βοΈ | Explicitly state: "100% Wood," "PP Plastic," or "Cast Iron." Avoid vague terms like "Composite." |
| β Commercial Invoice | βοΈ | Describe as "Wooden Toothpick Holder" or "Plastic Tableware Item," not just "Holder." |
| β Origin Certificate | βοΈ | To prove country of origin for tariff application. |
| β HS Code Pre-ruling | βοΈ | Recommended for metal items to avoid 50% surcharge disputes. |
β 2. Declaration Tips (Key Mantras)
π₯ "Material First, Function Second, Avoid Enameled Steel!"
| Situation | Correct Declaration | Wrong Declaration | Consequence |
|---|---|---|---|
| Wooden Holder | 4419.90.91.00 (Wooden Tableware, Other) |
Generic "Household Item" | Risk of misclassification to higher tax chapters. |
| Plastic Holder | 3924.10.40.00 (Plastic Tableware) |
3924.90.56.50 (Household Article) |
Avoid 7.5% additional tax. |
| Metal Holder | 7323.91.50.40 (Cast Iron, Not Enamelled) |
7323.94.00.80 (Enameled) |
Save 44.7% in taxes! |
| Mixed Materials | Declare main material + components | "Mixed Material Holder" | Customs may select the highest tariff rate. |
β 3. Special Circumstances
| Scenario | Handling Advice |
|---|---|
| OEM Custom Designs | Provide design specs to prove it is "Tableware" (for plastic) rather than "General Household." |
| Gift Sets | If toothpick holder is part of a gift set with other tableware, declare as a set under the primary material. |
| Enamelled Metal | Strongly Advise Against unless necessary. The 50% tax is prohibitive. Switch to uncoated cast iron or plastic/wood. |
| Small Quantities | Even for small shipments, correct HS code matters. 50% tax on $1,000 = $500 extra. |
π 5. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Estimated Tax | Certification | Notes |
|---|---|---|---|---|
| π¨π³ China | 4419.90.91.00 (Wood) |
0.0% | None | Best for wooden holders. |
| π¨π³ China | 3924.10.40.00 (Plastic) |
3.4% | None | Standard plastic tableware. |
| π¨π³ China | 7323.94.00.80 (Metal) |
50.0% | None | Avoid enamelled metal. |
| πΊπΈ USA | Varies by Material | 0%β25%+ | FDA (if food contact) | Different HS structure; check Chapter 39/44/73. |
| πͺπΊ EU | Varies by Material | 0%β6.5% | LFGB/Food Contact | No additional surcharges like China's 50%. |
π Conclusion:
- Wood is the safest and cheapest option for import into China (0% tax if classified correctly).
- Plastic is low cost (3.4%) if declared as tableware.
- Enameled Metal is prohibited by cost efficiency due to the 50% surcharge.
π 6. Common Errors & Pitfalls (Lessons Learned)
β Error 1: Declaring a Wooden Toothpick Holder as 4419.90.11.00 (Forks/Spoons) when itβs just a holder.
π Result: 5.3% tax instead of 0%. Solution: Use 4419.90.91.00 if it doesnβt fit cutlery.
β Error 2: Declaring a Plastic Toothpick Holder as 3924.90.56.50 (Household Article).
π Result: 10.9% tax (3.4% + 7.5%). Solution: Declare as 3924.10.40.00 (Tableware) to save 7.5%.
β Error 3: Ignoring the 50% surcharge on Enamelled Metal.
π Result: Massive cost increase. Solution: Switch to cast iron (no enamel) or non-metal materials.
β Error 4: Vague Description: "Holder."
π Result: Customs may choose the highest applicable tariff. Solution: Be specific: "Wooden Tableware Toothpick Holder."
β Correct Declaration Example:
"Wooden Toothpick Holder, for Tableware Use, 100% Natural Wood, Model ABC" β HS: 4419.90.91.00 (0%)
π― 7. Conclusion: Precise Classification, Maximum Savings!
π― Remember the Mantra:
πΉ "Wood 0%, Plastic 3.4%, Metal 50% (if Enameled)!"
πΉ "Declare as Tableware, Not Household Article!"
πΉ "Avoid Enameled Steel to Save 44.7%!"
π Pro Tip:
If you are exporting wooden or plastic toothpick holders, use the 0% or 3.4% rates to maintain high margins.
For metal items, consider non-enamelled cast iron or switch materials entirely.
π£ Immediate Action:
π Contact your customs broker with material specifications + product photos.
π Classify correctly to minimize tax and ensure smooth clearance!
β¨ Professional Clearance, Starting from Accurate Classification!
πΌ Every cent saved is pure profit!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.