Tropical Wood Furniture Connector
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 4418999195 | 38.2% | CN | US | Official Doc |
| 9403608093 | 35.0% | CN | US | Official Doc |
| 9403608040 | 35.0% | CN | US | Official Doc |
| 4421999880 | 38.3% | CN | US | Official Doc |
| 4421999400 | 35.0% | CN | US | Official Doc |
Product Images
AI Analysis
πͺ Tropical Wood Furniture Connector (Outdoor Furniture Components)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Strategic Clearance Strategy
π I. Product Definition & Classification: What Are "Tropical Wood Furniture Connectors"?
"Tropical Wood Furniture Connectors" refer to components or parts made primarily from tropical wood, used to assemble outdoor furniture. In international trade, their classification depends heavily on whether they are considered complete furniture pieces, parts of furniture, or miscellaneous wooden articles.
β οΈ Key Distinction:
- If the item is a pre-assembled unit resembling furniture β May fall under Chapter 44 (Wood Products) or Chapter 94 (Furniture) depending on completeness. - If it is a component/part (e.g., joints, brackets, connectors) made of wood β Typically classified under Chapter 94 (Parts of Furniture) or Chapter 44 (Miscellaneous Wood Articles). - Material Matters: Since itβs "Tropical Wood," additional tariffs may apply due to environmental trade measures (e.g., Section 301, Section 232).
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Applicable Scenario | Material |
|---|---|---|---|
4418.99.91.95 |
Other builders' joinery and carpentry of tropical wood | Pre-assembled outdoor furniture components that resemble architectural wood products | β Tropical Wood |
9403.60.80.93 |
Other wooden furniture and parts thereof | Parts/components of outdoor wooden furniture | β Wood (incl. Tropical) |
9403.60.80.40 |
Other wooden furniture and parts thereof (specifically for tropical woods like Teak) | Parts/components of outdoor furniture made from specific tropical woods | β Wood (Tropical, e.g., Teak) |
4421.99.98.80 |
Other articles of wood (catch-all category) | Wooden components not specifically described elsewhere | β Wood |
4421.99.94.00 |
Other articles of wood (parts/components) | Small wooden connectors/parts for furniture assembly | β Wood |
π Important Note:
- Chapter 94 is generally preferred for furniture-related items, including parts. - Chapter 44 applies if the item is considered a miscellaneous wood product rather than a direct furniture part. - Tropical Wood often triggers additional scrutiny due to CITES regulations and U.S. Lacey Act compliance.
π° III. 2026 Latest Tariff Rate Breakdown (Including Additional Duties & Policy Surcharges)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Date: Post-2025 (Current applicable rates as of 2026)
π― 1. 4418.99.91.95 ββ Buildersβ Joinery/Carpentry of Tropical Wood
| Item | Content |
|---|---|
| Base Tariff | 3.2% (ad valorem) |
| Section 301 Additional Tariff | +25.0% |
| Section 122 Tariff | +10.0% |
| Total Rate | 38.2% |
| Tax Calculation | CIF Value Γ 38.2% |
| De Minimis Exemption | β Not Eligible (High tariff threshold) |
| Legal Basis Path | HTSUS:4418.99.91.95 β Section 301: Footnote 9903.88.01 β Section 122: IEEPA |
π Explanation:
- This code is for builders' joinery, often applied to pre-assembled or semi-finished wooden components. - 38.2% is a high combined rate due to multiple surcharges.
π― 2. 9403.60.80.93 & 9403.60.80.40 ββ Other Wooden Furniture & Parts
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Additional Tariff | +25.0% |
| Section 122 Tariff | +10.0% |
| Total Rate | 35.0% |
| Tax Calculation | CIF Value Γ 35.0% |
| De Minimis Exemption | β Not Eligible |
| Legal Basis Path | HTSUS:9403.60.80.93/40 β Section 301 β Section 122 |
π Note:
- 0% base rate makes this the most cost-effective option if classified correctly as furniture parts. - Both93and40have identical tax structures; difference lies in sub-category specificity (e.g.,40for specific tropical woods like Teak).
π― 3. 4421.99.98.80 & 4421.99.94.00 ββ Miscellaneous Wood Articles
| Item | Content |
|---|---|
| Base Tariff | 3.3% (98.80) / 0.0% (94.00) |
| Section 301 Additional Tariff | +25.0% |
| Section 122 Tariff | +10.0% |
| Total Rate | 38.3% (98.80) / 35.0% (94.00) |
| Tax Calculation | CIF Value Γ Total Rate |
| De Minimis Exemption | β Not Eligible |
| Legal Basis Path | HTSUS:4421.99.xx β Section 301 β Section 122 |
π Comparison:
-4421.99.94.00is cheaper (35.0%) than4421.99.98.80(38.3%) due to 0% base rate. - These codes are catch-alls for wooden items not covered elsewhere.
π οΈ IV. Customs Clearance Practical Advice (Avoiding Pitfalls)
β 1. Required Documentation Checklist (All Must Be Provided)
| Document | Required | Explanation |
|---|---|---|
| β Product Specification Sheet | βοΈ | Dimensions, material type, assembly status |
| β Material Certificate | βοΈ | Confirm "Tropical Wood" origin (CITES/Lacey Act compliance) |
| β Product Photos (Clear) | βοΈ | Show connectors/joints clearly |
| β Commercial Invoice | βοΈ | Clearly state "Furniture Parts" or "Wooden Components" |
| β Packing List | βοΈ | Detail each componentβs quantity and weight |
| β Lacey Act Declaration | βοΈ | Essential for tropical wood imports to US |
| β Certificate of Origin (CO) | βοΈ | If non-China origin, may qualify for lower rates |
β 2. Declaration Strategy (Key Mantra)
π₯ βParts of Furniture, Not Whole Furniture! Tropical Wood Needs Proof!β
| Scenario | Correct Declaration | Wrong Practice |
|---|---|---|
| Wooden connector/joint for outdoor furniture | 9403.60.80.93 / 9403.60.80.40 |
Misdeclare as "Furniture" β Higher risk |
| Pre-assembled outdoor bench component | 4418.99.91.95 |
Misdeclare as "Part" β Audit risk |
| Small wooden dowel/connector | 4421.99.94.00 |
Misdeclare as "Tool" β Wrong HS |
| Teak furniture part | 9403.60.80.40 |
Generic "Wood Part" β Missed specificity |
β 3. Special Considerations
| Situation | Handling Advice |
|---|---|
| CITES Compliance | Ensure all tropical wood is legally sourced; provide permits if applicable |
| Lacey Act Violation | Strict penalties for illegal logging; ensure documentation is perfect |
| Section 301 Exemptions | Check if specific HTS codes have exclusions (rare for wood products) |
| Pre-Ruling Request | Apply for Advance Ruling if unsure between 9403 vs 4418 |
π V. Global Market Comparison (2026 Update)
| Country/Region | Recommended HS Code | Tariff Rate | Certification Required | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 9403.60.80.40 |
35.0% | CITES + Lacey Act | High surcharges due to China origin |
| πͺπΊ EU | 9403.60.80.93 |
~6.5% | FLEGT/UENG | No Section 301/122 |
| π¨π³ China | 9403.60.80.93 |
~5% | CCC (if applicable) | Low base rate |
| π¬π§ UK | 9403.60.80.93 |
~6.5% | Post-Brexit rules | Similar to EU |
π Conclusion:
- USA imposes the highest effective tariff (35β38.3%) due to Section 301 and 122 tariffs. - EU/UK offer lower rates but require strict sustainability documentation. - China domestic rate is low, but irrelevant for export.
π VI. Common Mistakes & Pitfalls (Lessons Learned)
β Mistake 1: Declaring "Wooden Connector" as "Hardware"
π Consequence: Wrong HS code β Seizure or Penalty
β Mistake 2: Ignoring CITES/Lacey Act for Tropical Wood
π Consequence: Import Ban or Heavy Fines
β Mistake 3: Assuming "Part" = Lower Duty
π Consequence: Still subject to 25% + 10% surcharges if from China
β Mistake 4: Using Vague Descriptions ("Wood Piece")
π Consequence: Customs Delay for further classification
β Correct Approach:
"Wooden Furniture Connector, Made of Teak, For Outdoor Assembly, Not Complete Furniture"
π― VII. Conclusion: Precise Classification Saves Costs!
π― Remember:
πΉ "Furniture Part = 35%, Wood Article = 35β38.3%"
πΉ "Tropical Wood = Extra Paperwork = No Excuses"
πΉ "China Origin = +35% Total Duty = Plan Ahead!"
π Pro Tip:
If your furniture connectors are not from China, you may avoid Section 301/122 tariffs.
Recommend Advance Ruling for complex components.
π£ Immediate Action:
π Consult Customs Broker + Provide Material Certificate + Apply for Pre-Ruling
π Ensure smooth clearance, minimize costs, maximize profits!
β¨ Professional Clearance Starts with Accurate Classification!
πΌ Every Percent Saved Counts in Global Trade!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.