Unstripped Pine Rough Wood
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 4407110052 | 35.0% | CN | US | Official Doc |
AI Analysis
π² Unstripped Pine Rough Wood (4407.11.00.52)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Import Strategy
π I. Product Definition & Classification: What is "Unstripped Pine Rough Wood"?
Unstripped Pine Rough Wood refers to timber that has been sawn, chipped, sliced, or peeled lengthwise, with a thickness exceeding 6mm. It is classified as Coniferous, specifically from the Pine genus (Pinus spp.).
Key characteristics defining this classification: * State: "Rough" means it has not been planed, sanded, or end-joined (though it may have been treated superficially, the core structure remains raw). * Condition: "Unstripped" implies it is not treated with preservatives, paints, or other chemical coatings for exterior durability. * Species: Strictly Pine (Pinus spp.), excluding Spruce, Fir, or Hemlock (which fall under different subheadings).
β οΈ Critical Distinction:
- If the wood is treated (preservative applied) β It moves to a different subheading (e.g., 4407.11.00.54 or similar depending on treatment type).
- If the wood is planed/sanded smoothly β It may still fall under 4407, but "Rough" specifically denotes un-processed surface texture for construction/industrial use.
- Thickness β€ 6mm β Classified differently (e.g., veneer sheets); this code applies > 6mm.
π¦ II. HS Code Classification Details (2026 Latest Tariff Alignment)
| HS Code | Product Description | Applicability | Treatment Status |
|---|---|---|---|
4407.11.00.52 |
Sawn/Peeled Pine, Thickness > 6mm, Rough, Not Treated | Construction lumber, pallets, raw materials for furniture/carpentry | β Untreated (Raw) |
| 4407.11.00.54 | Sawn/Peeled Pine, Thickness > 6mm, Rough, Treated | Outdoor decking, railway sleepers, exposed structures | β Treated (Preservative) |
| 4407.10.00.00 | Coniferous Wood (General/Other) | Non-Pine conifers (Spruce, Fir, etc.) | N/A |
| 4407.91.00.00 | Non-Coniferous Wood (e.g., Oak, Maple) | Hardwoods | N/A |
π Key Reminder:
- The code4407.11.00.52is specific to Pine that is Rough and Untreated.
- Any deviation in treatment status or species will result in misclassification and potential penalties.
- "Rough" does not mean "crude" or "waste"; it is a standard industrial grade for further processing.
π° III. 2026 Latest Tariff Rate Breakdown (US Imports from China)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Date: Current rates apply as per 2026 tariff schedules.
π― 1. 4407.11.00.52 β Unstripped Pine Rough Wood
| Item | Detail |
|---|---|
| Base Tariff Rate | 0.0% (Free Trade / Most Favored Nation) |
| Section 301 Additional Tariff | +25.0% |
| IEEPA Additional Tariff | Not Applied (Note: Section 301 covers the bulk of China-specific penalties for wood products; IEEPA usually applies to tech/electronics, but verify latest OFAC guidance) |
| Total Tariff Rate | 25.0% |
| Calculation Method | CIF Value (Cost + Insurance + Freight) Γ 25% |
| De Minimis Eligibility | β Not Eligible (Wood products generally excluded from $800 de minimis exemption if subject to Section 301) |
| Legal Basis | USITC:4407.11.00.52 β Section 301: Footnote 9903.88.01 (Applicable to Chapter 44 goods from China) |
π Explanation:
- While the Base Duty is 0%, the 25% Section 301 tariff significantly increases the landed cost.
- This is a high-cost import category due to trade tensions.
- No IEEPA surcharge is listed in the provided data (tax_detail: "Base: 0.0%, Additional: 25.0%"), so total is 25%.
π οΈ IV. Customs Clearance Practical Advice (Avoiding Pitfalls)
β 1. Required Documentation Checklist
| Document | Mandatory? | Notes |
|---|---|---|
| Commercial Invoice | β | Must clearly state: "Unstripped Pine Rough Wood, Thickness > 6mm, Not Treated, Pinus spp." |
| Packing List | β | Detail weight, volume, and number of bundles. |
| Bill of Lading (B/L) | β | Standard shipping document. |
| Phytosanitary Certificate | β | Critical! Issued by the country of export to prove wood is free from pests/diseases. |
| Fumigation Certificate | β | If required by destination country (e.g., ISPM 15 compliance for pallets/wood packaging). |
| Certificate of Origin (CO) | β | May help verify non-eligible origins if seeking exemptions (rare for pine). |
| Treatment Declaration | β | Explicitly state "Not Treated" to justify 4407.11.00.52 vs. treated codes. |
β 2. Declaration Tips (Key Keywords)
π₯ "Be Specific: Say 'Pine', Say 'Rough', Say 'Untreated'"
| Scenario | Correct Declaration | Incorrect Declaration | Risk |
|---|---|---|---|
| Raw Pine Lumber | "Rough Sawn Pine, Unstripped, Not Treated" | "Wood Planks" | Misclassification β Delays |
| Treated Pine | "Preservative-Treated Pine" | "Rough Pine" | Wrong HS Code β Penalties |
| Pine Veneer (<6mm) | "Pine Veneer Sheets" | "Rough Pine Wood" | Wrong Chapter (44 vs 44) |
| Non-Pine Conifer | "Spruce Sawn Wood" | "Pine Wood" | Wrong Species β Duty Error |
β 3. Special Situations
| Situation | Advice |
|---|---|
| Mixed Shipments | If pine is mixed with spruce, split the declaration. Pine (4407.11.00.52) and Spruce (4407.10.00.00) may have different treatment statuses or quotas. |
| Fumigation | Ensure wood is ISPM 15 compliant if using wood packaging. The wood itself must be pest-free. |
| Origin Routing | If pine is processed in a third country (e.g., Vietnam, Malaysia), check if Substantial Transformation occurs. If yes, origin may change, potentially avoiding Section 301 tariffs. |
| Value Assessment | Customs may inspect market value. Ensure CIF value is accurate to avoid under-valuation penalties. |
π V. Global Market Comparison (2026)
| Country/Region | HS Code | Base Rate | Additional Tariff (China) | Total Rate | Notes |
|---|---|---|---|---|---|
| πΊπΈ USA | 4407.11.00.52 |
0.0% | +25.0% (Sec 301) | 25.0% | High duty; verify IEEPA status. |
| π¨π³ China | 4407.11.00.52 |
0%~5%* | N/A | ~0-5% | Import duty depends on trade agreement. |
| πͺπΊ EU | 4407.11.00.00 |
0.0% - 2.7% | N/A | ~0-3% | Low duty; Phytosanitary strict. |
| π―π΅ Japan | 4407.11.00.00 |
0.0% - 3.2% | N/A | ~0-3% | Standard duty; requires fumigation. |
π Conclusion:
- USA is the most expensive market due to the 25% Section 301 tariff.
- EU/Asia offer lower base duties but have strict phytosanitary rules.
- Strategy: Consider transshipment or origin change if feasible, but ensure compliance with Rules of Origin.
π VI. Common Mistakes & Pitfalls (Lessons Learned)
β Mistake 1: Declaring "Treated" wood as "Not Treated"
π Consequence: Customs inspection reveals chemical stamps β Penalty + Re-inspection.
β Mistake 2: Missing Phytosanitary Certificate
π Consequence: Shipment rejected/returned at port due to pest risk.
β Mistake 3: Ignoring Thickness
π Consequence: If thickness β€ 6mm, itβs Veneer (4407 subheadings differ) β Wrong Duty Calculation.
β Mistake 4: Vague Description ("Wood Planks")
π Consequence: Customs cannot classify β Audit + Delay.
β Best Practice:
"Specify: Species (Pine), Condition (Rough, Untreated), Thickness (>6mm), and Include Phytosanitary Cert."
π― VII. Conclusion: Efficient Clearance, Cost Control
π― Key Takeaways:
πΉ HS Code:
4407.11.00.52for Rough, Untreated Pine.
πΉ Tariff: 25% (0% Base + 25% Section 301) for US imports from China.
πΉ Critical Doc: Phytosanitary Certificate is non-negotiable.
πΉ Strategy: Verify "Not Treated" status to avoid higher duty codes for treated wood.
π Pro Tip:
If you are importing large volumes, consider applying for an Exclusion from Section 301 tariffs if the product is not available from US suppliers. Check the USTR Exclusion List periodically.
π£ Immediate Action:
π Hire a Licensed Customs Broker to verify phytosanitary requirements.
π Ensure Invoice States: "Pine, Rough, Untreated, >6mm".
π Pre-clearance: Submit documents early to avoid port storage fees.
β¨ Professional Customs Clearance Starts with Accurate Classification!
πΌ Your Cost Efficiency Depends on Precision!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.