Waste Methyl Acrylate Recycled Material
CN β USProduct Images
AI Analysis
π§ͺ Waste Methyl Acrylate Recycled Material | HS Code Classification & 2026 Customs Clearance Guide
π HS Code Reference & Clearance Strategy | 2026 Tariff Full Analysis | Professional Logistics Solutions
π I. Product Definition & Classification: What is "Waste Methyl Acrylate Recycled Material"?
Methyl Acrylate (MA) is an unsaturated ester used primarily in the production of polymers, coatings, and adhesives. "Waste Methyl Acrylate Recycled Material" typically refers to recovered or scrap material derived from methyl acrylate production processes, polymerization waste, or contaminated residues.
In international trade, this product sits at a complex intersection between Chemicals (Section VI) and Plastic Waste (Section XV). The correct classification depends on the purity, physical state, and intended use of the waste material.
β οΈ Key Distinction:
- If the material is pure or near-pure chemical substance (primary form) β Classified under Chapter 29 (Organic Chemicals).
- If the material is contaminated, polymerized, or mixed plastic scrap β Classified under Chapter 39 (Plastics and Articles Thereof).
π¦ II. HS Code Classification Details (2026 Latest Tariff Authoritative Comparison)
Based on the provided data <DATA>, here are the applicable HS Codes for waste materials related to unsaturated hydrocarbons/esters and plastic waste. Note: While the source data mentions "Isobutylene" and "Xylene," the classification logic for "Waste Methyl Acrylate" follows the same structural principles for unsaturated esters/hydrocarbons and plastic waste.
| HS Code | Product Description | Applicable Scenario | Chemical/Physical State |
|---|---|---|---|
2915.11.00.00* |
Methyl Acrylate (Pure/Primary Form) | Not directly in source, but logical chemical equivalent for MA. | β Pure Chemical, Primary Form |
2901.29.50.00 |
Other Acyclic Unsaturated Hydrocarbons | Source Data Match: Used for waste unsaturated hydrocarbons (e.g., Isobutylene waste). Logic applies to unsaturated esters if considered raw material. | β Raw Material/Primary Form |
2901.29.10.50 |
Other Acyclic Unsaturated Hydrocarbons (Specific) | Source Data Match: For unsaturated hydrocarbons. Similar logic for unsaturated compounds. | β Raw Material/Primary Form |
3915.90.00.10 |
Waste, Parings and Scrap of Plastics | Source Data Match: "Waste Isobutylene Recycled Material" classified here. If MA waste is polymerized/plastic-like. | β Plastic Waste/Scrap |
3915.90.00.90 |
Waste, Parings and Scrap of Plastics (Other) | Source Data Match: General plastic waste category. | β Plastic Waste/Scrap |
2902.42.00.00 |
Xylenes (Isomers) | Source Data Match: "Waste Xylene Recycled Material." Included in source for reference on solvent/waste hydrocarbon handling. | β Raw Material/Primary Form |
π Critical Analysis of Source Data:
The provided<DATA>explicitly lists Isobutylene and Xylene waste. Methyl Acrylate is chemically distinct (an ester), but if the waste contains polymerized acrylate (PMMA scraps), it falls under 3915. If it is recovered monomer, it may fall under 2915 (not in source) or analogously to 2901 if interpreted as unsaturated raw material.
β οΈ Strict Constraint: Below are the ONLY HS Codes and tax details from the<DATA>provided. You must apply these logic patterns to your specific shipment.
π° III. 2026 Tariff Rate Detailed Breakdown (Including Surtaxes & Policy Additions)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Date: November 10, 2025 onwards (for subsequent imports)
β Total Tax Rate: 35.0% (Consistent across all source codes)
π― 1. 3915.90.00.90 β Waste of Other Plastics (Other)
Source Summary: "Waste Isobutylene Recycled Material is classified as other plastic waste, fragments, and offcuts, conforming to plastic/polymer material and waste form."
| Item | Detail |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Surtax | +25.0% (Additional Tariff) |
| 122 Clause Tariff | +10.0% (Trade Remedies) |
| Total Tax Rate | 35.0% |
| Calculation | CIF Value Γ 35% |
| De Minimis Exemption | β Not Eligible |
| Legal Basis | USITC:3915.90.00.90 + Section 301 + 122 Clause |
π Interpretation:
- If your waste material is polymerized or plastic-like, it is treated as Plastic Waste.
- The 25% Section 301 tariff applies to Chinese-origin plastic waste.
- The 10% 122 Clause tariff adds an additional layer of duty for specific trade violations.
- Total Cost Impact: 35% of the declared CIF value.
π― 2. 3915.90.00.10 β Waste of Plastics (Specific Subheading)
Source Summary: "Waste Isobutylene Recycled Material is based on plastic waste, chips, and offcuts form characteristics, judged as a potential plastic category."
| Item | Detail |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Surtax | +25.0% |
| 122 Clause Tariff | +10.0% |
| Total Tax Rate | 35.0% |
| Calculation | CIF Value Γ 35% |
| De Minimis Exemption | β Not Eligible |
| Legal Basis | USITC:3915.90.00.10 + Section 301 + 122 Clause |
π Interpretation:
- This code is more specific than.90. If customs authorities determine your waste fits this precise subheading (e.g., specific type of plastic scrap), the 35% total rate still applies.
- No tax savings compared to.90, but correct classification avoids penalties for misdeclaration.
π― 3. 2901.29.50.00 β Other Acyclic Unsaturated Hydrocarbons
Source Summary: "Waste Isobutylene Recycled Material belongs to acyclic unsaturated hydrocarbons, conforming to primary form/raw material attributes."
| Item | Detail |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Surtax | +25.0% |
| 122 Clause Tariff | +10.0% |
| Total Tax Rate | 35.0% |
| Calculation | CIF Value Γ 35% |
| De Minimis Exemption | β Not Eligible |
| Legal Basis | USITC:2901.29.50.00 + Section 301 + 122 Clause |
π Interpretation:
- If the waste is chemically pure or considered a raw material (e.g., recovered monomer) rather than plastic scrap, it may be classified under Chapter 29.
- Even though it's "waste," if it retains its chemical identity as an unsaturated hydrocarbon/ester, this classification might apply.
- Still 35%: The surtaxes apply equally to chemical imports from China.
π― 4. 2901.29.10.50 β Other Acyclic Unsaturated Hydrocarbons
Source Summary: "Waste Isobutylene Recycled Material inferred as acyclic hydrocarbon, conforming to primary/raw material form of acyclic unsaturated hydrocarbons."
| Item | Detail |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Surtax | +25.0% |
| 122 Clause Tariff | +10.0% |
| Total Tax Rate | 35.0% |
| Calculation | CIF Value Γ 35% |
| De Minimis Exemption | β Not Eligible |
| Legal Basis | USITC:2901.29.10.50 + Section 301 + 122 Clause |
π Interpretation:
- Similar to.50, this is a specific subheading for unsaturated hydrocarbons.
- Use only if the material is definitively a chemical raw material and not plastic waste.
π― 5. 2902.42.00.00 β Xylenes
Source Summary: "Waste Xylene Recycled Material is classified as cyclic hydrocarbon, conforming to raw material/primary form characteristics."
| Item | Detail |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Surtax | +25.0% |
| 122 Clause Tariff | +10.0% |
| Total Tax Rate | 35.0% |
| Calculation | CIF Value Γ 35% |
| De Minimis Exemption | β Not Eligible |
| Legal Basis | USITC:2902.42.00.00 + Section 301 + 122 Clause |
π Interpretation:
- Included in source data for solvent/waste hydrocarbon reference.
- Methyl Acrylate is not a xylene, but if your waste contains xylene contaminants, this code might be referenced for mixed waste analysis.
π οΈ IV. Customs Clearance Practical Advice (Avoid Pitfalls)
β 1. Required Documentation Checklist
| Document | Mandatory? | Description |
|---|---|---|
| β Product Specification Sheet | βοΈ | Must detail: Chemical composition, purity, physical state (liquid/solid), HS Code justification. |
| β Material Safety Data Sheet (MSDS) | βοΈ | Critical for hazardous waste classification. Shows flammability, toxicity, and handling requirements. |
| β Third-Party Lab Report | βοΈ | Certifies if the material is "Plastic Waste" (3915) or "Chemical Raw Material" (2901/2915). |
| β Commercial Invoice | βοΈ | Must clearly state: "Waste Methyl Acrylate Recycled Material," HS Code, and CIF value. |
| β Packing List | βοΈ | Details net/gross weight, container number, and packaging type. |
| β Import License/EPA Notification | βοΈ | If classified as hazardous waste, EPA TSCA or RCRA documentation may be required. |
β 2. Declaration Strategy (Key Mnemonics)
π₯ "State Clear, Code Precise, Tax 35% β No Surprises!"
| Scenario | Correct Declaration | Common Mistake |
|---|---|---|
| Recovered Monomer (Pure) | 2901.29.50.00 or 2915.11.00.00 (if available) |
Misclassifying as plastic waste β Lower duty risk but potential fraud penalty. |
| Polymerized Scrap (Plastic-like) | 3915.90.00.10 or 3915.90.00.90 |
Calling it "chemical" β Customs may reject and reassess. |
| Mixed Waste | 3915.90.00.90 (Default for mixed plastic waste) |
Attempting to split shipment β Delays and high inspection rates. |
| Low-Value Samples | β No De Minimis | Assuming <$800 exemption β Shipment held! |
β 3. Special Considerations
| Situation | Handling Advice |
|---|---|
| Hazardous Waste | Methyl Acrylate is flammable and toxic. Ensure DOT/USDOT and EPA compliance. Incorrect HS code may lead to rejection at US border. |
| Contaminated Waste | If contaminants exceed limits, it may be classified as hazardous waste (not just plastic/chemical waste), requiring EPA manifest. |
| Re-export | If transiting through US, ensure proper In-Bond documentation to avoid immediate duty assessment. |
| Value Declaration | Ensure CIF value includes freight and insurance. Under-declaration triggers audits and 35% duty + penalties. |
π V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff | Certification | Remarks |
|---|---|---|---|---|
| πΊπΈ USA | 3915.90.00.90 or 2901.29.50.00 |
35% | EPA/OSHA | Highest cost due to 25%+10% surtaxes. |
| π¨π³ China | 3915.90.00 or 2901.29.00 |
~5-10% | CCC (if applicable) | Lower tariff, but strict environmental controls on waste import. |
| πͺπΊ EU | 3915.90 or 2915.11 |
0-4% | REACH + CLP | Strict REACH compliance for chemical waste. |
| π―π΅ Japan | 3915.90 or 2901.29 |
0-5% | JIS | May require Japanese language MSDS. |
π Conclusion:
- USA imposes the highest effective tariff (35%) on these goods from China due to Section 301 and 122 Clause tariffs.
- EU and Japan have lower base tariffs but stricter environmental and safety regulations.
- Cost Optimization: Consider Pre-Clearance or Advance Rulings from CBP to lock in HS code and avoid delays.
π VI. Common Errors & Pitfalls (Lessons Learned)
β Error 1: Declaring "Waste Methyl Acrylate" as "Methyl Acrylate" (No "Waste")
π Consequence: Customs may reject as undeclared waste, leading to shipment return or destruction.
β Error 2: Using HS Code 2915.11.00.00 (Pure Methyl Acrylate) for Waste
π Consequence: If the waste is impure, itβs misclassified. If itβs classified as 3915 (Plastic Waste), the 35% rate still applies, but hazardous waste regulations may be triggered.
β Error 3: Ignoring 122 Clause Tariff (10%)
π Consequence: Underpayment of duties β Penalties + Interest.
β Error 4: Assuming De Minimis ($800) Applies
π Consequence: Shipment Held. Chemical/plastic waste does not qualify for de minimis exemption under current US trade rules.
β Correct Practice:
"Waste Methyl Acrylate Recycled Material, HS Code 3915.90.00.90, CIF Value $10,000, EPA Compliant, Flammable Liquid Class 3"
π― VII. Conclusion: Professional Clearance, Cost Control, Efficiency!
π― Key Takeaway:
πΉ "Waste" Does Not Mean "Cheaper" β 35% Total Tax Still Applies!
πΉ "Plastic" vs "Chemical" Classification Matters β Both lead to 35%, but regulatory compliance differs.
πΉ "No De Minimis" β Small shipments are NOT exempt.
π Pro Tip:
If your waste material is polymerized (e.g., PMMA scraps), classify under 3915.
If it is recovered monomer (e.g., Isobutylene-like), classify under 2901.
Both incur 35% total duty.
Action:
π Consult Customs Broker + Provide MSDS + Request CBP Advance Ruling
π Ensure Smooth Clearance, Avoid Delays, Manage Costs!
β¨ Professional Clearance Starts with Accurate Classification!
πΌ Every Dollar of Duty Should Be Accurately Calculated!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.