Wide format Negative Film
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3702440160 | 38.7% | CN | US | Official Doc |
| 3702430100 | 38.7% | CN | US | Official Doc |
Product Images
AI Analysis
ποΈ Wide Format Negative Film (Photographic Film in Rolls)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
π I. Product Definition & Classification: Do You Really Understand "Wide Format Negative Film"?
Wide format negative film refers to sensitized, unexposed photographic film in rolls, manufactured from materials other than paper, paperboard, or textiles. It is primarily used for professional photography, industrial imaging, or scientific applications.
In international trade, this product is strictly categorized under Chapter 37 (Photographic or Cinematographic Goods). The classification depends heavily on two physical attributes: 1. Width: Must exceed 105 mm. 2. Perforations: Must be non-perforated (continuous edge).
β οΈ Critical Distinction:
- If the film is perforated (has holes along the edges for mechanical transport), it falls under different subheadings (usually 3702.39 or 3702.52 depending on width).
- This guide only covers NON-PERFORATED wide format films, as specified in the provided data.
- If the film is exposed, it is NOT subject to these codes (exposed film is generally not classified here).
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
Based on the provided data, there are two primary HS Codes for wide format, non-perforated, unexposed negative film, distinguished by their width.
| HS Code | Product Description | Width Specification | Application Scenario |
|---|---|---|---|
3702.44.01.60 |
Other film, without perforations, of a width exceeding 105 mm but not exceeding 610 mm | > 105 mm AND β€ 610 mm | Medium-wide format photography, scientific imaging, intermediate width industrial films. |
3702.43.01.00 |
Other film, without perforations, of a width exceeding 610 mm and of a length not exceeding 200 m | > 610 mm AND Length β€ 200 m | Large format photography, ultra-wide scientific/imaging applications, specific industrial rolls. |
π Key Clarification:
-3702.44.01.60is for film widths between 105.1 mm and 610 mm.
-3702.43.01.00is for film widths over 610 mm, but with a length constraint of β€ 200 meters.
- Note: The provided data does not specify the length requirement for the< 610 mmcategory, but does specify it for the> 610 mmcategory. Always verify length specifications in your invoice.
π° III. 2026 Latest Tariff Rate Details (Detailed Breakdown)
β Applicable Region: Import into China (implied by the tax structure provided in
<DATA>)
β Product Type: Photographic Film (Unexposed)
β Status: Sensitized, Unexposed
π― 1. 3702.44.01.60 β Wide Format Non-Perforated Film (105mm < Width β€ 610mm)
| Item | Content |
|---|---|
| Base Tariff | 0.0% (Ad valorem) |
| Additional Tariff | 0.0% |
| Total Effective Tax Rate | 0.0% |
| Tax Calculation | Duty = CIF Value Γ 0% = $0 |
| Policy Note | No additional duties, anti-dumping, or countervailing duties apply based on the provided data. |
π Explanation:
- This code benefits from a zero tariff rate under the current tariff schedule for this specific category of photographic materials.
- There are no USITC or IEEPA surcharges applicable in this specific dataset (unlike electronics in the example).
- Cost Advantage: Zero duty significantly lowers the landed cost compared to other electronic or mechanical goods.
π― 2. 3702.43.01.00 β Ultra-Wide Format Non-Perforated Film (Width > 610mm, Length β€ 200m)
| Item | Content |
|---|---|
| Base Tariff | 0.0% (Ad valorem) |
| Additional Tariff | 0.0% |
| Total Effective Tax Rate | 0.0% |
| Tax Calculation | Duty = CIF Value Γ 0% = $0 |
| Policy Note | Same zero-treatment policy applies as above. |
π Note:
- Despite being a larger, potentially more specialized industrial product, it enjoys the same 0% duty rate.
- Crucial Compliance Point: The length must not exceed 200 meters. If the roll is longer than 200m, this code cannot be used, and the correct classification may differ (potentially leading to different tax treatments or restrictions).
π οΈ IV. Customs Clearance Practical Advice (Real-World Pitfall Guide)
β 1. Essential Documentation Checklist (Non-Negotiable)
| Document | Must Provide | Explanation |
|---|---|---|
| β Commercial Invoice | βοΈ | Must clearly state: "Sensitized, Unexposed Photographic Film, Non-Perforated". Include precise width (mm) and length (m). |
| β Packing List | βοΈ | Specify net/gross weight, number of rolls, and dimensions. |
| β Product Technical Data Sheet | βοΈ | Confirms material type (not paper/fabric), sensitivity status, and absence of perforations. |
| β Certificate of Origin (CO) | βοΈ | Required for verification of origin, though duty is 0%, itβs standard for trade compliance. |
| β HS Code Pre-ruling (Optional but Recommended) | βοΈ | Especially for width boundaries (105mm or 610mm), a pre-ruling prevents misclassification disputes. |
β 2. Declaration Tips (Key Mantra)
π₯ βWidth Defines Code, Perforation Defines Chapter, Length Limits the Large.β
| Scenario | Correct HS Code | Wrong Approach |
|---|---|---|
| Width = 350mm, Non-perforated | 3702.44.01.60 |
Misclassifying as 3702.39 (perforated) β Risk of audit. |
| Width = 700mm, Length = 150m | 3702.43.01.00 |
Ignoring length limit β If length > 200m, code is invalid. |
| Width = 80mm (Too narrow) | Not applicable | Film β€ 105mm falls under different subheadings (e.g., 3702.31). |
| Exposed Film | Not applicable | Exposed film is not "sensitized, unexposed" β Different HS chapter. |
| Film with Perforations | Not applicable | Perforated film uses different codes (e.g., 3702.39.xx) β Misdeclaration penalty. |
β 3. Special Case Handling
| Situation | Handling Advice |
|---|---|
| Boundary Width (Exactly 105mm or 610mm) | Exclude boundary from "Exceeding". Use β€ 610mm for 610mm flat. Use < 105mm for 105mm flat. Check exact wording: "Exceeding 105mm" means >105. So 105.0mm exactly may be classified elsewhere. |
| Mixed Rolls (Different Lengths) | Ensure each rollβs length is declared. If any roll > 200m in the >610mm category, the whole shipment may be reclassified. |
| Material Verification | Must confirm it is not paper, paperboard, or textiles. If itβs plastic/polyester base, it fits Chapter 37. |
| Zero Duty Verification | Even with 0% duty, customs may still inspect for anti-dumping or security reasons. Keep technical specs ready. |
π V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff Rate | Certification/Notes |
|---|---|---|---|
| π¨π³ China | 3702.44.01.60 / 3702.43.01.00 |
0.0% | Standard import clearance. No special permits for general photographic film. |
| πΊπΈ USA | Varies (Check 3702.xx.xx) | Likely 0% | FDA or EPA may apply if for medical/industrial use. Check for Section 301 tariffs (usually exempt for photographic film). |
| πͺπΊ EU | 3702 44 / 3702 43 | 0% | CE marking not required for film itself, but packaging may need RoHS if chemicals involved. |
| π―π΅ Japan | 3702.44 / 3702.43 | 0-3% | JIS standards may apply for industrial use. |
π Conclusion:
- China currently offers 0% duty for these specific wide-format non-perforated films.
- USA and EU also generally apply low or zero tariffs for photographic film, but ensure correct HS subheadings match local tariff schedules.
- Always verify local regulations for hazardous materials (film chemicals) even if duty is zero.
π VI. Common Mistakes & Pitfalls (Lessons Learned)
β Mistake 1: Declaring 105.0 mm wide film as 3702.44.01.60 ("Exceeding 105mm").
π Consequence: "Exceeding" means > 105. If itβs exactly 105mm, it may be classified under a different, potentially higher-tariff code. Adjust declaration to precise measurement.
β Mistake 2: Ignoring the 200-meter length limit for 3702.43.01.00.
π Consequence: If a 700mm-wide film roll is 250m long, using 3702.43.01.00 is incorrect. This can lead to duty underpayment claims and penalties. Declare correct length or use different code.
β Mistake 3: Not specifying "Non-Perforated".
π Consequence: Customs may assume standard perforated film and misclassify, causing delays. Always explicitly state "Non-Perforated" or "Continuous Edge".
β Mistake 4: Confusing Sensitized/Unexposed with Exposed Film.
π Consequence: Exposed film is not "sensitized, unexposed." Misdeclaration can lead to smuggling suspicions or waste import restrictions. Clearly state "Unexposed" on invoice.
β Correct Declaration Example:
"Photographic Film, Rolls, Sensitized, Unexposed, Plastic Base, Non-Perforated, Width 350mm, Length 10m, Model XYZ"
π― VII. Conclusion: Precision in Classification Saves Costs
π― Remember the Mantra:
πΉ "Width < 105mm: Different Code"
πΉ "Width 105-610mm: 3702.44.01.60 (0% Duty)"
πΉ "Width > 610mm + β€ 200m: 3702.43.01.00 (0% Duty)"
πΉ "Perforated? Look Elsewhere!"
πΉ "Exposed? Not This Chapter!"
π Pro Tip:
Even with 0% duty, accurate declaration is critical to avoid customs audits or reclassification penalties. For large shipments, consider applying for a Binding Tariff Information (BTI) or Pre-ruling from customs authorities to lock in the HS code.
π£ Immediate Action:
π Contact your customs broker with exact width (mm) and length (m) of each roll.
π Ensure your commercial invoice explicitly states "Sensitized, Unexposed, Non-Perforated" to guarantee smooth, zero-duty clearance.
β¨ Professional Clearance Starts with Accurate Classification!
πΌ Your every millimeter matters in customs!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.