Wire Mesh (HS Code 7314315010)

🌐 Wire Mesh (HS Code 7314.31.50.10)

📌 HS Code Reference & Customs Clearance Guide | 2026 Updated Tariff Analysis | Professional Import Strategy

✅ Product Type: Welded Wire Stucco Netting, Furred, Not Reinforced with Supplemental Horizontal Wire
✅ Material: Iron or Steel Wire, Zinc-Plated or Coated
✅ Applicable Country: United States (US)
✅ Effective Date: November 10, 2025 (inclusive)

📦 One. Product Definition & Classification: What Exactly Is This Wire Mesh?

Wire Mesh refers to woven, welded, or expanded metal fabric made from iron or steel wire. In this case, we're dealing with a specific type:

🔹 Welded wire stucco netting – used primarily in construction for reinforcing plaster, stucco, or concrete finishes.
🔹 Furred – meaning it has longitudinal ridges or ribs for better adhesion.
🔹 Not reinforced with supplemental horizontal wire – distinguishing it from heavier-duty mesh types.
🔹 Zinc-plated or coated – provides corrosion resistance, essential for outdoor or damp environments.

⚠️ Key Differentiator:
- If the mesh is welded at intersections, zinc-coated, and used for stucco or plaster reinforcement, it falls under 7314.31.50.10.
- If it’s not furred, not stucco-specific, or reinforced with extra horizontal wires, it may fall under 7314.31.50.80.

📊 Two. HS Code Classification Breakdown (2026 Official Tariff Matrix)

🔍 Critical Note:
- 7314.31.50.10 is highly specific to furred stucco netting — any deviation (e.g., no furring, extra wire) shifts it to 7314.31.50.80.
- Do not confuse with “expanded metal” or “woven wire” — those fall under different subheadings.

💰 Three. 2026 Updated Tariff & Duty Breakdown (With附加 Taxes)

✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: November 10, 2025

🎯 1. HS Code 7314.31.50.10 — Furred Stucco Netting (Zinc-Coated, Welded)

📌 Explanation:
- The 25% USITC tariff applies to all steel/iron products from China under Section 301.
- The 50% IEEPA tariff is a separate, punitive duty on steel, aluminum, and copper products from China, enforced under emergency powers.
- Combined, this creates a 75% total duty — one of the highest in the steel product category.

🎯 2. HS Code 7314.31.50.80 — Other Zinc-Coated Welded Wire Mesh

📌 Note:
- Even if your mesh doesn’t qualify as stucco netting, the same 75% duty applies — because it’s welded, zinc-coated, and made of steel wire.
- No exception for "non-stucco" use — the tariff is product-type based, not application-based.

🛠️ Four. Customs Clearance Best Practices (Real-World Pro Tips)

✅ 1. Mandatory Documentation (No Exceptions!)

✅ 2. 申报技巧 (The Golden Rule)

🔥 “Furring Defines the Code — No Furring? 7314.31.50.80. No Zinc? Different HS Code.”

📌 Pro Tip:
- Do not use generic terms like “wire mesh” or “steel netting” in the invoice.
- Use exact product description from the tariff:

“Welded wire stucco netting, furred, not reinforced with supplemental horizontal wire, plated/coated with zinc”

✅ 3. Special Cases & Workarounds

🌍 Five. Global Market Comparison (2026 Update)

📌 Conclusion:
- The U.S. is the only market imposing 75% duty on this product from China.
- Shifting production to Vietnam/Mexico can save 75% in duties — a major cost advantage.

🚨 Six. Common Mistakes & Legal Risks (Avoid These!)

❌ Mistake 1: Calling it “construction mesh” or “steel netting” in the invoice
👉 Result: Customs may reclassify it → 75% duty applied, even if correct code is used.

❌ Mistake 2: Not showing furring pattern in photos
👉 Result: Customs may assume it’s not stucco netting → move to 7314.31.50.80 → same duty, but risk of audit.

❌ Mistake 3: Exporting from China without CO or zinc test report
👉 Result: Detention at port, delayed release, possible seizure.

❌ Mistake 4: Assuming “non-stucco use” avoids tariff
👉 Result: Wrong! Duty is based on product type, not end-use.

✅ Correct Labeling Example:

“Welded Wire Stucco Netting, Furred, Zinc-Coated, Not Reinforced with Supplemental Horizontal Wire, 12" x 12", 1.2mm Wire Gauge, ASTM A123 Certified”

🎯 Seven. Final Verdict: How to Win the Tariff Game

🔹 If from China:
- 75% duty is unavoidable unless you relocate production or apply for exemption.
- Best strategy: Shift manufacturing to Vietnam, Mexico, or Thailand → 0% duty.

🔹 If from elsewhere:
- You’re golden — 0% duty in most markets.

🔹 If you must import from China:
- Apply for a pre-ruling (Advance Ruling) — confirm HS Code and duty rate before shipment.
- Use a U.S.-based customs broker with experience in steel product tariffs.

📌 Summary: Key Takeaways (Remember This!)

🚀 Call to Action: Act Now Before the Next Shipment!

📞 Contact a U.S. Customs Broker + Provide:
- Product photos (with furring visible)
- Zinc coating test report
- Technical specs
- Origin certificate

📄 Request an Advance Ruling (AR) on your HS Code — avoid surprise duties.

🌍 Consider shifting production to Vietnam, Mexico, or Thailand — save 75% in tariffs.

✨ Professional Clearance Starts with Accurate Classification!
💼 Your profit margin depends on one line: the HS Code.
🚨 One mistake = 75% duty. One smart move = 75% savings.

📣 Don’t gamble with tariffs — get it right the first time!
🔐 Your shipment. Your risk. Your profit.