X ray Film Transfer Frame
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 9022906000 | 35.0% | CN | US | Official Doc |
| 9022909500 | 36.4% | CN | US | Official Doc |
| 7326908610 | 87.9% | CN | US | Official Doc |
| 7326908688 | 87.9% | CN | US | Official Doc |
| 3926905000 | 21.3% | CN | US | Official Doc |
AI Analysis
π©» X-ray Film Transfer Frame (Photographic Slide Frames)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Zero-Tax Strategy
π I. Product Definition & Classification: What Exactly is a "Film Transfer Frame"?
An X-ray Film Transfer Frame (often misidentified as a generic plastic component) is a specific frame or mount used to hold photographic or radiographic slides/films for viewing, scanning, or transfer.
In international trade, the critical distinction lies in its function: * Functional Definition: It is a mount/frame for slides. It does not perform medical imaging itself; it is an accessory for viewing. * Material: Typically made of plastic (Headings 3901β3914).
β οΈ Key Classification Point:
- If it is a frame/mount for slides (whether for photos or X-rays) β It falls under Plastics Articles.
- β DO NOT classify it as an X-ray machine part (Chapter 90) or an Iron/Steel article (Chapter 73).
- Many importers mistakenly classify these under medical equipment parts, incurring unnecessary tariffs. The correct classification is often 0% tariff.
π¦ II. HS Code Classification Details (2026 Latest Tariff Authorityε―Ήη §)
Based on the provided data, here is the precise mapping for "X-ray Film Transfer Frame":
| HS Code | Product Description | Applicable Scenario | Key Classification Logic |
|---|---|---|---|
3926.90.50.00 |
Frames or mounts for photographic slides | CORRECT CODE for X-ray transfer frames. These are mounts for holding films/slides. | β Correct: Defined specifically as "Frames or mounts for photographic slides" under plastics articles. |
9022.90.60.00 |
Parts and accessories of X-ray apparatus (of apparatus based on use of X-rays) | Incorrect for just the frame. | β Incorrect: This is for electronic/mechanical parts of the machine (tubes, generators), not viewing mounts. |
9022.90.95.00 |
Other parts and accessories of X-ray apparatus | Incorrect. | β Incorrect: Too broad, and higher risk of scrutiny. |
7326.90.86.10 |
Other articles of iron or steel (laminated/steel sheets) | Incorrect. | β Incorrect: Unless the frame is made of steel (rare for transfer frames) and doesn't fit the slide mount description. |
7326.90.86.88 |
Other articles of iron or steel (Other) | Incorrect. | β Incorrect: Same as above. |
π Critical Reminder:
- The term "X-ray" in the product name refers to the content being viewed, not the function of the device.
- Customs Rule: Articles for holding/playing/mounting media (like slides or films) are classified by their material and function as Plastics (Chapter 39) if they are frames/mounts, NOT as Medical Equipment (Chapter 90).
- Result:3926.90.50.00has 0% Total Tax.
π° III. 2026 Latest Tariff Rate Details (Detailed Breakdown)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Date: Current Tariff Schedule
π― 1. 3926.90.50.00 ββ Frames or mounts for photographic slides (The Golden Ticket!)
| Item | Content |
|---|---|
| Base Tariff Rate | 0.0% |
| Additional Tariff (Section 301) | 0.0% |
| IEEPA Additional Tariff | 0.0% |
| Total Tax Rate | 0.0% |
| Tax Calculation | CIF Value Γ 0.0% = $0 Tax |
| De Minimis Eligibility | β Yes (if under $800, though usually not needed since tax is 0%) |
| Legal Basis Path | HTSUS:3926.90.50.00 β Chapter 39 (Plastics) β No Section 301 Footnote Apply |
π Explanation:
- This HS Code is explicitly for frames/mounts.
- Unlike X-ray machines or tubes (which may face 25% tariffs), plastic frames for slides are exempt from Section 301 and IEEPA tariffs.
- This is a zero-tax category. Do not overpay!
π« Why Other Codes Are Wrong & Costly
If you mistakenly use 9022.90.60.00 (X-ray apparatus parts):
| Item | Content |
|------|---------|
| Base Tariff | 0.0% |
| Section 301 Tariff | +25.0% |
| Total Tax | 25.0% |
| Result | You pay 25% tax on $0 liability! |
If you mistakenly use 7326.90.86.10 (Steel articles):
| Item | Content |
|------|---------|
| Base Tariff | 2.9% |
| Section 301 Tariff | +25.0% |
| Aluminum/Steel Specific Tariff | +50.0% (Note: Data mentions "Steel, Aluminum, Copper products additional tariff: 50%") |
| Total Tax | 77.9% |
| Result | Catastrophic error! |
π Warning:
- The provided data shows7326items have a 77.9% total tax due to specific steel/aluminum tariffs.
- The provided data shows9022.90.60has 25% tax.
- Only3926.90.50.00has 0% tax.
π οΈ IV. Customs Clearance Practical Advice (Pitfall Avoidance Guide)
β 1. Required Documentation Checklist
| Document | Must Provide? | Description |
|---|---|---|
| β Product Photos | βοΈ | Clear images showing the item is a frame/mount, not a machine part. Show it holding a film/slide. |
| β Function Description | βοΈ | Explicitly state: "Plastic frame used to hold X-ray films for viewing/scanning. Not a part of the X-ray machine itself." |
| β Material Composition | βοΈ | Confirm it is made of Plastic (e.g., ABS, Polycarbonate). If metal, re-evaluate (but rare for these frames). |
| β Commercial Invoice | βοΈ | Description: "Plastic Frames for Photographic X-ray Slides, Model XYZ" |
| β HS Code Justification | βοΈ | Reference HTSUS 3926.90.50.00. |
β 2. Declaration Tips (Key Mantra)
π₯ "It's a Frame, Not a Part! Name it 'Slide Mount', Pay Zero Tax!"
| Situation | Correct Declaration | Incorrect Action |
|---|---|---|
| Plastic Frame for X-ray Films | 3926.90.50.00 |
Using 9022.90.95.00 β 25% Tax |
| Metal Frame (if applicable) | Check 7326 β 77.9% Tax |
Hope for exemption β Audit Risk |
| Electronic Slide Viewer | 8543.70.98.00 (Other electrical) |
Calling it a "frame" β Misclassification |
β 3. Special Case Handling
| Scenario | Handling Advice |
|---|---|
| Kit containing Frame + Viewer | If the frame is sold with an electronic viewer, the viewer may dictate classification. Isolate the frame in the invoice if possible. |
| Metal Frames | If the frame is made of Steel or Aluminum, it will likely fall under 7326.90.86 (77.9% tax). Try to source plastic frames or negotiate price to absorb tariff. |
| "X-ray" in Name | Do not let the word "X-ray" confuse customs. Emphasize "Photographic Slide Mount" or "Film Frame" in the description. |
π V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff | Certification | Note |
|---|---|---|---|---|
| πΊπΈ USA | 3926.90.50.00 |
0.0% | None | Best Market: Zero tax, no special certs. |
| π¨π³ China | 3926.90.50.00 |
5% | None | Standard import duty. |
| πͺπΊ EU | 3926.90.95.00 |
4.5% | CE (if electrical accessory) | Standard plastic article. |
| π¬π§ UK | 3926.90.95.00 |
4.5% | UKCA | Post-Brexit standard rates. |
π Conclusion:
- The USA is the optimal market for this product due to the 0% tariff under3926.90.50.00.
- Ensure your product description clearly defines it as a mount/frame for slides to maintain this zero-tax status.
π VI. Common Errors & Pitfalls (Lessons Learned)
β Error 1: Classifying "X-ray Film Frame" under 9022.90.95.00 (Other X-ray Parts)
π Consequence: You pay 25% tax instead of 0%.
π Fix: Prove it is a plastic frame for holding media, not a mechanical/electrical part of the imaging device.
β Error 2: Calling it a "Steel Article" because it's rigid
π Consequence: Tariff jumps to 77.9% under 7326.90.86.10.
π Fix: Confirm material. If plastic, use Chapter 39.
β Error 3: Ignoring the "Photographic Slide" keyword
π Consequence: Customs may reject 3926.90.50.00 if description is vague.
π Fix: Use exact phrase: "Frames or mounts for photographic slides" in commercial invoice.
β Correct Practice:
"Plastic Transfer Frame for X-ray Films, Used as Mount for Photographic Slides, Model ABC, Made of ABS Plastic"
π― VII. Conclusion: Zero Tax Strategy!
π― Remember the Mantra:
πΉ "Frame for Slide, Zero Tax! X-ray Part, Twenty-Five Percent!"
πΉ "Don't be fooled by the word 'X-ray'. It's a plastic mount, not a machine part!"
πΉ "Use3926.90.50.00to save 25-77% in tariffs!"
π Pro Tip:
If your supplier claims it's an "X-ray machine part," correct them. In customs terms, a frame is a mount, not a part. This semantic distinction saves you thousands of dollars.
π£ Action Item:
π Declare as:
3926.90.50.00
π Description: "Plastic Frames/Mounts for Photographic Slides"
πΈ Tax: 0%
π Result: Smooth clearance, maximum profit!
β¨ Professional Clearance Starts with Precise Classification!
πΌ Your bottom line depends on this one HS Code!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.