Zipper Pull
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 831511 | 0.0% | CN | US | Official Doc |
| 831519 | 0.0% | CN | US | Official Doc |
| 9607200040 | 46.5% | CN | US | Official Doc |
| 9607200080 | 46.5% | CN | US | Official Doc |
Product Images
AI Analysis
𧡠Zipper Pulls (Slide Fastener Parts)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Compliance Strategy
π I. Product Definition & Classification: Do You Really Know "Zipper Pulls"?
Zipper pulls are essential functional components of slide fasteners (zippers). In international trade, they are strictly classified based on material and whether they are integrated into the slider assembly. Misclassification leads to massive tariff differences and clearance delays.
There are two main categories: 1. Integrated Parts: Pulls attached to sliders as part of the complete "slider assembly." β Classified under Chapter 96. 2. Loose Components: Standalone pulls (metal, plastic, etc.) sold separately. β Classified under Chapter 83 (Base metals or other materials).
β οΈ Key Distinction:
- If the pull is already attached to the slider and sold as a unit β 9607.20
- If the pull is loose/standalone (not attached to a slider) β 8315.11 or 8315.19
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority Match)
Based on the provided data, here is the precise mapping for Zipper Pulls:
| HS Code | Product Description | Material/Type | Tax Status |
|---|---|---|---|
| 9607.20.00.40 | Parts Sliders, with or without pulls | Integrated sliders with attached pulls | β 0.0% Total Tax |
| 9607.20.00.80 | Parts Other (e.g., loose slides, separate parts) | Other parts of slide fasteners | β οΈ 36.5% Total Tax |
| 8315.11 | Zipper pulls made of metal | Standalone metal pulls (not attached) | β Error (Failed to Retrieve) |
| 8315.19 | Other zipper pulls (non-metal) | Standalone pulls (plastic, leather, etc.) | β Error (Failed to Retrieve) |
π Critical Note:
- HS Code 9607.20.00.40 is the LOWEST TARIFF option if the item is a slider with an attached pull.
- HS Code 9607.20.00.80 captures "Other parts" (not sliders), often leading to higher tariffs.
- HS Codes 8315.11 & 8315.19 apply to standalone loose pulls. Note: Tax information for these codes was unavailable in the source data.
π° III. 2026 Tariff Rate Detailed Breakdown
β Applicable Jurisdiction: Based on standard US/China trade context (implied by tax details)
β Effective Time: Current regulations
π― 1. 9607.20.00.40 ββ Sliders with or without pulls (The "Low Tax" Choice)
| Item | Detail |
|---|---|
| Product Definition | Complete slider assemblies, including the pull tab if attached. |
| Base Tariff | 0.0% |
| Additional Tariff | 0.0% |
| Total Tax Rate | 0.0% |
| Tax Detail | "εΊη‘ε ³η¨: 0.0%, ε εΎε ³η¨: 0.0%" |
| Strategic Advantage | Zero Duty! This is the most cost-effective classification for slider assemblies. |
π Explanation:
- This code covers the functional unit of the zipper (the slider).
- If your product is a zipper slider (even with the pull attached), use this code.
- Result: No tariff burden. Maximize profit margins.
π― 2. 9607.20.00.80 ββ Other Parts of Slide Fasteners (The "High Tax" Trap)
| Item | Detail |
|---|---|
| Product Definition | Non-slider parts (e.g., zipper teeth, tape, stoppers) or separate parts not classified as sliders. |
| Base Tariff | 11.5% |
| Additional Tariff | 25.0% |
| Total Tax Rate | 36.5% |
| Tax Detail | "εΊη‘ε ³η¨: 11.5%, ε εΎε ³η¨: 25.0%" |
| Risk Factor | High! If declared incorrectly as "other parts" instead of "sliders," you pay 36.5%. |
π Explanation:
- This is a residual category. It captures anything in Chapter 96.20 that is NOT a slider (9607.20.00.40).
- Avoid this code for zipper sliders or integrated pulls.
- Use only for loose non-slider components (e.g., separate zipper teeth, sliders without pulls if misclassified, etc.).
π― 3. 8315.11 & 8315.19 ββ Standalone Zipper Pulls (Material-Based)
β οΈ Data Limitation: The provided data indicates "Failed to retrieve tax information" for these HS codes.
| HS Code | Description | Status |
|---|---|---|
| 8315.11 | Zipper pulls made of metal | β Error (Tax Data Missing) |
| 8315.19 | Other zipper pulls (non-metal) | β Error (Tax Data Missing) |
π Implication:
- If you import loose metal pulls (not attached to sliders), they fall under Chapter 83.
- Action Required: You must verify current tax rates for 8315.11/8315.19 separately, as they are not zero-tariff like 9607.20.00.40.
- Recommendation: If possible, integrate the pull with the slider during production to use the 0% tariff code (9607.20.00.40) instead of importing loose pulls.
π οΈ IV. Customs Clearance Practical Advice (Real-World Pitfall Avoidance)
β 1. Documentation Checklist (Non-Negotiable)
| Document | Must Provide | Reason |
|---|---|---|
| β Product Photos | βοΈ | Show if pull is attached to slider. Critical for distinguishing 9607.20.00.40 vs 8315.xx. |
| β Technical Specs | βοΈ | Confirm material (metal/plastic) and assembly method. |
| β Commercial Invoice | βοΈ | Clearly state "Slider Assembly with Pull" or "Standalone Pull." |
| β Packing List | βοΈ | Ensure no loose pulls are mixed with sliders in the same box without clear labeling. |
β 2. Classification Strategy (Key Mnemonic)
π₯ "Attached = 9607.40 (0%) | Loose = 8315 (Unknown/High)"
| Scenario | Correct HS Code | Tax Rate | Action |
|---|---|---|---|
| Pull is riveted/stitched to slider | 9607.20.00.40 |
0% | β Best Option |
| Slider without pull (just the metal piece) | 9607.20.00.40 |
0% | β Best Option |
| Loose metal pull (sold separately) | 8315.11 |
β Check | β οΈ Verify tax rate; likely higher than 0%. |
| Loose plastic pull (sold separately) | 8315.19 |
β Check | β οΈ Verify tax rate; likely higher than 0%. |
| Zipper tape or teeth | 9607.20.00.80 |
36.5% | β Avoid unless necessary |
β 3. Special Handling Tips
| Situation | Recommendation |
|---|---|
| Mixed Containers | If shipping both sliders (0%) and loose pulls (unknown tax), separate them clearly in documentation. Do not mix in one line item. |
| Custom Labels | Label products as "Slider Assembly" if the pull is attached. Avoid labeling loose pulls as "Slider." |
| Tariff Engineering | If importing loose pulls, consider assembling them with sliders before export (if feasible) to utilize the 0% tariff for 9607.20.00.40. |
| Data Error Handling | For 8315.11/19, consult a customs broker to confirm current rates, as the source data is incomplete. |
π V. Global Market Comparison (2026 Context)
| Market | Recommended HS Code | Estimated Duty | Note |
|---|---|---|---|
| πΊπΈ USA | 9607.20.00.40 |
0.0% | Best for slider assemblies. |
| πΊπΈ USA | 8315.11/19 |
Check | Loose pulls may face Section 301 tariffs. |
| πͺπΊ EU | 9607.20.00 | Varies | Generally lower duties, but check VAT. |
| π¨π³ China | 9607.20.00 | Low | Import duty may apply, but lower than US. |
π Conclusion:
- USA offers 0% duty for slider assemblies (with or without pulls).
- Loose pulls are risky due to unclear tax data and potential higher rates.
- Strategy: Design products to include attached pulls to qualify for9607.20.00.40.
π VI. Common Mistakes & Pitfalls (Blood Tears Lessons)
β Mistake 1: Declaring "Zipper Pulls" as 8315.11 when they are attached to sliders.
π Consequence: May be reclassified by customs as 9607.20.00.40 (good) or 9607.20.00.80 (bad). Inconsistent labeling causes delays.
β Mistake 2: Using 9607.20.00.80 for sliders.
π Consequence: You pay 36.5% tax instead of 0%. Loss of profit!
β Mistake 3: Ignoring tax data for 8315.11/19.
π Consequence: Unexpected duties at customs. Always verify standalone pull rates.
β Correct Practice:
"Slider with Pull = 9607.20.00.40 (0%) | Loose Pull = Verify 8315.11/19"
π― VII. Conclusion: Professional Declaration Saves Money
π― Remember:
πΉ "Attach the pull to the slider, and the tax becomes zero!"
πΉ "Loose pulls are risky; integrated sliders are safe."
πΉ "Never use 9607.20.00.80 for sliders unless absolutely necessary."
π Pro Tip:
If you import loose metal pulls, consider assembly in a third country (e.g., Vietnam, Mexico) to create "Sliders with Pulls" and export under 9607.20.00.40 to the US/EU.
π£ Immediate Action:
π Confirm if your pulls are attached or loose.
π Declare as "Slider Assembly" if attached.
π Enjoy 0% Tariff with9607.20.00.40!
β¨ Professional Customs Clearance Starts with Accurate Classification!
πΌ Your Cost Efficiency Depends on This Detail!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.