agricultural irrigation plastic hose
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3926909989 | 22.8% | CN | US | Official Doc |
| 3917400095 | 40.3% | CN | US | Official Doc |
| 3917400080 | 40.3% | CN | US | Official Doc |
| 8424820020 | 37.4% | CN | US | Official Doc |
| 8424820090 | 37.4% | CN | US | Official Doc |
| 3926909987 | 22.8% | CN | US | Official Doc |
Product Images
AI Analysis
πΎ Agricultural Irrigation Plastic Hose
π₯οΈ Classification & Customs Clearance Guide | 2026 Tariff Analysis for US Imports from China
π HS Code Reference & Customs Strategy | Latest Tariff Breakdown | Professional Clearance Protocol
π I. Product Definition & Classification: What is an "Irrigation Hose"?
In international trade, "Agricultural Irrigation Plastic Hose" is a broad term that often leads to classification errors. It is not a single HS Code but depends on the specific form, function, and component status of the item.
For US imports from China, these items generally fall into two main categories: 1. Flexible Plastic Pipes/Connectors: If the product is a simple hose, connector, or fitting used for irrigation. 2. Complete Irrigation Machinery/Equipment: If the product is a specialized device or unit designed for irrigation.
β οΈ Key Distinction Point: - If the item is a loose hose, connector, or fitting β It is classified as a Plastic Article (Chapter 39) or Part of a Machine. - If the item is a functional irrigation device (e.g., sprayer, specialized emitter unit) β It is classified as Machinery (Chapter 84). - Crucial Note: Misclassifying a simple hose as "machinery" or vice versa can lead to severe duty discrepancies and customs delays.
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority)
Based on the provided data, here are the specific HS Codes, summaries, and tax details for Agricultural Irrigation Plastic Hoses and related components.
| HS Code | Product Description | Summary Logic | Total Tax Rate (China Origin) |
|---|---|---|---|
| 3926.90.99.89 | Other Plastic Articles (General Parts/Accessories) | Plastic material, classified as "other parts/accessories" in plastic products. | 22.8% |
| 3917.40.00.95 | Plastic Pipe Fittings (Connectors) | Plastic material, form is a connector, fits plastic pipe accessory category. | 40.3% |
| 3917.40.00.80 | Plastic Pipe Accessories (Other) | Plastic material, form is a connector, falls under "other" in plastic pipe accessories. | 40.3% |
| 8424.82.00.20 | Other Irrigation Equipment | Use is irrigation equipment, plastic material, fits definition of "other irrigation equipment". | 37.4% |
| 8424.82.00.90 | Irrigation Machinery (Catch-all) | Use is in the irrigation field, plastic material, fits "catch-all" logic for other irrigation equipment. | 37.4% |
| 3926.90.99.87 | Other Plastic Articles (Connectors/Fittings) | Plastic material, form is a connector, falls under "other" category in plastic products. | 22.8% |
π Important Clarification: - 3917.40.00.95 / 3917.40.00.80: Apply if your "hose" is actually a rigid connector, joint, or fitting made of plastic. These are considered "pipe fittings." - 3926.90.99.89 / 3926.90.99.87: Apply if the item is a general plastic accessory or a flexible hose/connector not specifically categorized as a rigid pipe fitting. 89 is for "other parts," 87 is for "other" connectors. - 8424.82.00.20 / 8424.82.00.90: Apply if the item is a complete irrigation device (e.g., a specialized sprayer head, a metering unit, or a complex assembly) rather than just a hose or simple fitting. 20 is for specific "other equipment," 90 is the catch-all for irrigation machinery.
π° III. 2026 Latest Tariff Rate Breakdown (Including Surcharges & Policy Add-ons)
β Applicable Country: United States (US) β Origin: China (CN) β Effective Date: 2025/2026 (Current policies)
π― 1. Plastic Pipe Fittings (Connectors/Joints)
HS Codes: 3917.40.00.95 & 3917.40.00.80
| Item | Content |
|---|---|
| Base Duty Rate | 5.3% |
| Section 301 Surcharge | +25.0% |
| Section 122 Tariff | +10.0% |
| Total Effective Rate | 40.3% |
| Tax Calculation | CIF Value Γ 40.3% |
| De Minimis Eligibility | β Not Eligible (Deny de minimis) |
| Legal Basis Path | USITC:3917.40.00.95 β Section 301: 25% β Section 122: 10% |
π Explanation: - These codes classify plastic connectors and joints. - They attract the highest tax burden (40.3%) due to the combination of base duties and two separate surcharges (Section 301 and Section 122). - Warning: If your "hose" has rigid plastic connectors, customs may classify it under these codes instead of lower-rate flexible hose codes.
π― 2. General Plastic Articles / Accessories
HS Codes: 3926.90.99.89 & 3926.90.99.87
| Item | Content |
|---|---|
| Base Duty Rate | 5.3% |
| Section 301 Surcharge | +7.5% |
| Section 122 Tariff | +10.0% |
| Total Effective Rate | 22.8% |
| Tax Calculation | CIF Value Γ 22.8% |
| De Minimis Eligibility | β Not Eligible (Deny de minimis) |
| Legal Basis Path | USITC:3926.90.99.89 β Section 301: 7.5% β Section 122: 10% |
π Explanation: - These codes apply to general plastic parts, accessories, or flexible hoses that are not specifically "pipe fittings." - The Section 301 surcharge is lower (7.5%) compared to pipe fittings (25%). - Strategy: If your product is a flexible irrigation hose (not a rigid connector), argue for classification under 3926.90.99.89/87 to save ~17.5% in duties.
π― 3. Irrigation Equipment/Machinery
HS Codes: 8424.82.00.20 & 8424.82.00.90
| Item | Content |
|---|---|
| Base Duty Rate | 2.4% |
| Section 301 Surcharge | +25.0% |
| Section 122 Tariff | +10.0% |
| Total Effective Rate | 37.4% |
| Tax Calculation | CIF Value Γ 37.4% |
| De Minimis Eligibility | β Not Eligible (Deny de minimis) |
| Legal Basis Path | USITC:8424.82.00.20 β Section 301: 25% β Section 122: 10% |
π Explanation: - These codes apply if the product is considered machinery (e.g., a complete irrigation unit, sprayer, or complex device). - Despite a lower base duty (2.4%), the Section 301 surcharge is high (25%), resulting in a total of 37.4%. - Caution: Do not misclassify a simple hose as "machinery" to avoid higher scrutiny, unless it truly is a complex device.
π οΈ IV. Customs Clearance Practical Advice (Avoiding Pitfalls)
β 1. Preparation Checklist (Non-Negotiable)
| Document | Must Provide? | Explanation |
|---|---|---|
| β Product Specifications | βοΈ | Include material (PE/PVC/HDPE), diameter, length, pressure rating, flexibility. |
| β Product Photos | βοΈ | Show the entire item, joints, ends, and any labels. Clearly distinguish if it's a flexible hose or a rigid connector. |
| β Bill of Lading / Packing List | βοΈ | Ensure description matches HS Code logic (e.g., "Plastic Irrigation Hose" vs. "Plastic Pipe Fitting"). |
| β Commercial Invoice | βοΈ | Clearly state "Made in China" for accurate surcharge calculation. |
| β Material Safety Data Sheet (MSDS) | βοΈ | If required by specific port or carrier. |
| β Country of Origin Certificate | βοΈ | Essential for proving China origin and applying correct tariffs. |
β 2. Declaration Tips (Key Rules)
π₯ "Hose is Flexible, Connector is Rigid, Machine is Functional!"
| Scenario | Correct HS Code Logic | Wrong Approach |
|---|---|---|
| Flexible Plastic Hose (e.g., drip tape, soaker hose) | 3926.90.99.89 / 87 (22.8%) | Misclassifying as "Pipe Fitting" β 40.3% |
| Rigid Plastic Connector/Joint | 3917.40.00.95 / 80 (40.3%) | Misclassifying as "General Plastic Article" β 22.8% (Risk of penalty) |
| Complex Irrigation Device (e.g., automatic sprayer unit) | 8424.82.00.20 / 90 (37.4%) | Misclassifying as "Hose" β 22.8% (Risk of penalty) |
| Hose + Fittings Sold Together | Principal Character Rule: Classify based on the main component. If hoses dominate, use 3926. If connectors dominate, use 3917. | Splitting declaration arbitrarily β High audit risk |
β 3. Special Cases Handling
| Case | Handling Suggestion |
|---|---|
| Kit Includes Hose + Connectors | Declare as the primary item. If 90% is hose, declare as hose (3926). If 50/50, consult a customs broker. |
| OEM Custom Hoses | Provide client order and design specs. Avoid vague descriptions like "Plastic Tube." |
| Reinforced Hoses | If internally reinforced with metal or fabric, it may still be 3926, but must declare material layers clearly. |
| Used/Refurbished Hoses | Generally prohibited or restricted. New goods only. |
π V. Global Market Comparison (2026)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Certification | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 3926.90.99.89 (Hose) |
22.8% | None specific | High surcharges (301+122) apply. |
| π¨π³ China | 3917.40.00.00 |
5.3% (Import) | CCC (if applicable) | Low base duty. |
| πͺπΊ EU | 3917.21.00 (Plastic hoses) |
0-6.5% | CE (if machinery) | No Section 301/122 equivalent. |
| π¦πΊ Australia | 3917.21.00 |
5% | ACCC | Standard MFN rates. |
π Conclusion: - The USA is the most expensive market due to Section 301 and Section 122 tariffs. - Correct classification can save 17.5% (between 22.8% and 40.3%). - Flexibility is key: A flexible hose should never be classified as a rigid connector.
π VI. Common Errors & Pitfalls (Lessons Learned)
β Mistake 1: Calling a rigid plastic elbow joint a "hose" to get 22.8% tax. π Result: Customs rejects, reclassifies to 3917.40.00.95 (40.3%), applies penalties, delays shipment.
β Mistake 2: Calling a complete irrigation pump unit a "hose" to get 22.8% tax. π Result: Customs reclassifies to 8424.82.00.90 (37.4%), demands additional documentation, fines for misdeclaration.
β Mistake 3: Ignoring Section 122 Tariff. π Result: Underestimating total cost by 10%. All Chinese-origin plastic/irrigation items from the listed HS codes incur this.
β Correct Practice:
"Flexible Plastic Irrigation Hose, PVC, 1/2 inch diameter, coiled, for agricultural use, Made in China"
OR
"Plastic Pipe Connector, PVC, 90-degree elbow, for irrigation systems, Made in China"
π― VII. Conclusion: Professional Declaration Saves Money!
π― Remember the Motto:
πΉ "Hose = Flexible = 22.8% | Connector = Rigid = 40.3% | Machine = Functional = 37.4%" πΉ "HS Code Determines Cost, Misclassification Leads to Pain!"
π Pro Tip: If your product is a kit (hose + connectors), negotiate with your supplier or adjust the principal value to ensure the dominant item is classified correctly. For complex irrigation systems, always seek a Pre-Ruling from US Customs and Border Protection (CBP) to avoid surprises.
π£ Immediate Action:
π Contact a Licensed Customs Broker + Provide Product Photos + Apply for Advance Ruling π Ensure Smooth Clearance, Maximize Profit, Avoid Surprises!
β¨ Professional Clearance Starts with Accurate Classification! πΌ Every Percent of Duty Matters!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.