cake scraper
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 8215994500 | 10.0% | CN | US | Official Doc |
| 8215995000 | 15.3% | CN | US | Official Doc |
| 3924104000 | 13.4% | CN | US | Official Doc |
| 4419901100 | 15.3% | CN | US | Official Doc |
| 4419909100 | 20.7% | CN | US | Official Doc |
Product Images
AI Analysis
π° Cake Scraper: The Ultimate HS Code & Clearance Guide (2026 Edition)
π International Trade Compliance | Smart Duty Optimization | Professional Customs Strategy
π Part 1: What is a "Cake Scraper"? Understanding the Product & Its Variations
A Cake Scraper (also known as a Cake Smoother, Icing Spatula, or Pastry Server) is a kitchen utensil designed for smoothing icing, frosting, or cutting cake layers. However, the material it is made of dictates its HS Code and duty rate.
There are four primary material variations found in international trade: 1. Stainless Steel / Metal: Common for durability and professional use. 2. Plastic: Common for home baking and disposable use. 3. Wooden: Common for eco-friendly and aesthetic kitchen sets. 4. Mixed Materials: Wood handles with metal blades (requires careful classification).
β οΈ Critical Distinction:
- Metal scrapers usually fall under Chapter 82 (Cutlery/Tableware).
- Plastic scrapers fall under Chapter 39 (Plastics).
- Wooden scrapers fall under Chapter 44 (Wood).
Choosing the wrong material classification can lead to 10%β20% duty discrepancies!
π¦ Part 2: HS Code Classification Matrix (2026 Authorized Codes)
Based on the provided trade data, here are the 4 valid HS Codes for Cake Scraper imports:
| HS Code | Material Basis | Product Description | Logic for Classification |
|---|---|---|---|
| 8215.99.45.00 | π₯ Base Metal (e.g., Stainless Steel) | Tableware (Miscellaneous) | "Cake scraper" is treated as a table utensil. Since it's not a specific knife/fork listed elsewhere, it falls under "Other" (θ΄±ιε±/Other). |
| 8215.99.50.00 | π₯ Base Metal (Specific Use) | Cake Server/Tool | Specifically classified as a "Cake Server/Tool" under Base Metal tableware. |
| 3924.10.40.00 | π₯ Plastic | Kitchenware (Miscellaneous) | Classified as "Plastic tableware/kitchenware." Fits the "Other" category for plastic goods. |
| 4419.90.11.00 | π² Wooden | Kitchen Utensils | Specifically for wooden tableware/kitchen utensils. |
| 4419.90.91.00 | π² Wood/Mixed | Kitchen Utensils (Dud/Residual) | Used when the material is ambiguous (Wood + Stainless Steel) or as a residual "Other" category for wooden kitchen goods. |
π Key Insight:
- 8215.99.45.00 and 8215.99.50.00 both target Base Metal but have different duty structures based on specific "usage" vs "general tableware."
- 3924.10.40.00 is the go-to for Plastic.
- 4419.90.11.00 vs 4419.90.91.00: The former is for specific wooden utensils, the latter is the "catch-all" for mixed or specific wooden kitchen goods.
π° Part 3: 2026 Duty Rate Deep Dive (USA Import Context)
β
Applicable Country: United States (US)
β
Origin: China (CN)
β
Validity: As of 2026 Trade Rules
π― Scenario 1: Metal Scrapers (HS 8215.99.45.00 & 8215.99.50.00)
Option A: 8215.99.45.00 (Base Metal - General Tableware)
| Item | Detail |
|---|---|
| Base Tariff | 0.0% (General) |
| Section 301 / "Add-on" Tariff | 0.0% |
| Section 122 Tariff | +10.0% (China-specific) |
| Total Duty Rate | 10.0% |
| Legal Basis | Base Tariff + Section 122 (10% China-specific) |
| Calculation | CIF Value Γ 10% |
π Explanation:
- This code offers the lowest possible duty (10%) for metal scrapers.
- It relies on the logic that these are "Other" tableware items where the base tariff is waived or low, but the Section 122 (10%) China-specific tariff applies.
Option B: 8215.99.50.00 (Base Metal - Cake Server/Tool)
| Item | Detail |
|---|---|
| Base Tariff | 5.3% |
| Section 301 / "Add-on" Tariff | 0.0% |
| Section 122 Tariff | +10.0% |
| Total Duty Rate | 15.3% |
| Legal Basis | Base Tariff (5.3%) + Section 122 (10%) |
| Calculation | CIF Value Γ 15.3% |
π Explanation:
- While this code specifies the tool as a "Cake Server," it incurs a higher base tariff (5.3%).
- Combined with the 10% Section 122, the total is 15.3%.
- Strategy: Always prefer 8215.99.45.00 over 8215.99.50.00 for metal scrapers to save 5.3% in duties!
π― Scenario 2: Plastic Scrapers (HS 3924.10.40.00)
Option: 3924.10.40.00 (Plastic Kitchenware)
| Item | Detail |
|---|---|
| Base Tariff | 3.4% |
| Section 301 / "Add-on" Tariff | 0.0% |
| Section 122 Tariff | +10.0% |
| Total Duty Rate | 13.4% |
| Legal Basis | Base Tariff (3.4%) + Section 122 (10%) |
| Calculation | CIF Value Γ 13.4% |
π Explanation:
- Plastic scrapers are slightly cheaper to import than the "Cake Server" metal code but more expensive than the "General Tableware" metal code.
- Total: 13.4%.
π― Scenario 3: Wooden Scrapers (HS 4419.90.11.00 & 4419.90.91.00)
Option A: 4419.90.11.00 (Wooden Kitchen Utensils)
| Item | Detail |
|---|---|
| Base Tariff | 5.3% |
| Section 301 / "Add-on" Tariff | 0.0% |
| Section 122 Tariff | +10.0% |
| Total Duty Rate | 15.3% |
| Legal Basis | Base Tariff (5.3%) + Section 122 (10%) |
Option B: 4419.90.91.00 (Wooden/Mixed "Other")
| Item | Detail |
|---|---|
| Base Tariff | 3.2% |
| Section 301 / "Add-on" Tariff | +7.5% (Heavy Add-on) |
| Section 122 Tariff | +10.0% |
| Total Duty Rate | 20.7% |
| Legal Basis | Base (3.2%) + Section 301 Add-on (7.5%) + Section 122 (10%) |
π Critical Warning:
- Option A (11.00) is 15.3% (Best for pure wood).
- Option B (91.00) is 20.7% (Avoid unless necessary!).
- Why the difference? Code4419.90.91.00triggers an additional 7.5% Section 301 add-on tariff, likely due to specific "miscellaneous" or "non-compliant" categorization for mixed materials.
- Strategy: If your product is 100% Wood, use4419.90.11.00. If it's mixed, ensure you justify the classification carefully, or risk paying 5.4% more (20.7% vs 15.3%).
π οΈ Part 4: Professional Customs Clearance Advice
β 1. Documentation Checklist (Must-Haves)
| Document | Requirement | Why It Matters |
|---|---|---|
| Product Composition Sheet | π΄ Mandatory | Must clearly state: "100% Stainless Steel" OR "100% Plastic" OR "Wood Handle + Steel Blade". Ambiguity leads to 91.00 (20.7%) or audits. |
| Product Photos | π΄ Mandatory | High-res photos of the blade, handle, and packaging. Customs needs to verify material visually. |
| Material Certificate | β Recommended | Supplier declaration of material (e.g., "Stainless Steel 304"). |
| Commercial Invoice | β Mandatory | Description must match HS logic: "Metal Cake Smoother" vs "Wooden Pastry Server". |
| Packing List | β Mandatory | Weight/Vol breakdown to verify cost calculation. |
β 2. Declaration Strategy (The "Golden Rules")
π₯ Rule 1: Be Specific About Material!
β BAD: "Kitchen Utensil, 100% New"
β GOOD: "Stainless Steel Cake Scraper, Tableware, 8215.99.45.00"
β GOOD: "Wooden Cake Smoother, 4419.90.11.00"π₯ Rule 2: Avoid the "Mixed" Trap
If the scraper is Wood handle + Metal blade:
- Try to justify it as Metal (8215.99.45.00) if the metal is the "essential character" (duty 10%).
- If forced into Wood (4419.90), ensure it falls under.11(15.3%), NOT.91(20.7%).
- Tip: Provide a "Material Value Breakdown" if requested.π₯ Rule 3: Section 122 Applies to All
Remember, ALL the codes listed above include a 10% Section 122 Tariff. This is a China-specific surcharge that cannot be avoided for Chinese-origin goods.
- Metal (Best): 10.0% (Total)
- Plastic: 13.4% (Total)
- Wood (Specific): 15.3% (Total)
- Wood (Mixed/Other): 20.7% (Total)
β 3. Special Scenarios
| Scenario | Action |
|---|---|
| OEM Orders (Custom Brand) | Ensure the product description does not say "Generic" if it has a specific shape. If it's a standard shape, stick to the material-based code. |
| Set with Box/Storage | If the scraper comes with a storage sleeve or box, declare the scraper only if the box is minimal. If the box is part of the sale, the duty is calculated on the total CIF value. |
| Sample vs. Commercial | Samples are duty-exempt, but must be marked "Not for Resale". Commercial shipments are fully taxed. |
| Mixed Material Scraper | Best Practice: Declare as Metal (8215.99.45.00) if the metal part is the primary cutting/smoothing component. This saves 5.4% compared to the Wood Mixed code. |
π Part 5: Market Comparison (2026)
| Region | Best Code | Total Duty (China Origin) | Note |
|---|---|---|---|
| πΊπΈ USA | 8215.99.45.00 |
10.0% | Lowest duty, but Section 122 applies. |
| πΊπΈ USA | 4419.90.91.00 |
20.7% | Highest duty (Wood/Mixed) - Avoid! |
| πͺπΊ EU | Varies | ~0-12% | EU does not typically have Section 122. |
| π¨π¦ Canada | Varies | ~0-15% | CETA may apply for specific materials. |
π Conclusion for USA Importers:
Stick to8215.99.45.00for metal scrapers! It is the absolute cheapest entry point (10% total).
If you must import plastic,3924.10.40.00(13.4%) is acceptable.
Avoid the4419.90.91.00classification unless absolutely necessary, as it adds a 7.5% penalty on top of the base tariff.
π― Part 6: Final Checklist for Shippers
- Identify Material: Is it Metal, Plastic, or Wood?
- Check Shape: Is it a "Cake Server" (Specific) or "General Tableware" (General)?
- Metal β Use General (
.45) to save money. - Metal β Use Specific (
.50) only if required by specific buyer specs.
- Metal β Use General (
- Calculate Total Duty:
- Metal: 10%
- Plastic: 13.4%
- Wood (Pure): 15.3%
- Wood (Mixed): 20.7%
- Declare Accurately: "Stainless Steel Cake Smoother" or "Plastic Icing Scraper". NEVER use generic terms like "Kitchen Tool".
π Pro Tip:
"Material first, Use second, Code third!"
Get the material right, and the HS Code (and tax) follows automatically. Avoid the "Mixed" classification trap to save up to 10.7% in duties!
β¨ Smart Trade, Clear Borders, Maximize Profit!
Ready to ship your Cake Scrapers? Contact your customs broker with this guide today!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.