control arm bushing
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 8708806590 | 0.0% | CN | US | Official Doc |
| 4016996010 | 37.5% | CN | US | Official Doc |
| 8708995500 | 37.5% | CN | US | Official Doc |
| 4016931050 | 37.5% | CN | US | Official Doc |
Product Images
AI Analysis
π Control Arm Bushing (Control Arm Sleeve)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Transit Strategy
π I. Product Definition & Classification: Do You Really Understand "Control Arm Bushing"?
The Control Arm Bushing is a critical component of the vehicle's suspension system. It acts as a vibration absorber and shock buffer, typically composed of rubber bonded to a metal housing. Its primary function is to connect the control arm to the vehicle frame, allowing for controlled movement while isolating road noise and vibration.
In international trade, classification depends heavily on the material composition (Rubber vs. Metal) and the specific function (Suspension Part vs. General Rubber Part).
β οΈ Key Classification Distinction:
- If classified as a Vehicle Part: Falls under Chapter 87 (Vehicles).
- If classified as a Rubber Part: Falls under Chapter 40 (Rubber and articles thereof).
- Critical Note: Misclassification can lead to drastic differences in tariff rates (from 2.5% to over 85%)!
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority Reference)
Based on the provided data, here are the four potential HS Codes for Control Arm Bushings, along with their logical justifications and tax implications.
| HS Code | Product Description / Logic | Tax Rate (Total) | Tax Detail Breakdown |
|---|---|---|---|
| 8708.99.55.00 | Vehicle Part (Rubber Composite) Bushings are considered parts/accessories of vehicles. The summary notes they are usually rubber-metal composites used for shock absorption, fitting the characteristics of this code. |
37.5% | Base: 2.5% Section 301: 25.0% Section 122: 10% |
| 4016.93.10.50 | Rubber Part (Non-Excluded) Classified as a vulcanized rubber article. It is a rubber-metal combination part for suspension, not an O-ring or seal, so it does not fall into excluded categories. |
37.5% | Base: 2.5% Section 301: 25.0% Section 122: 10% |
| 8708.80.65.90 | Suspension System Part Specifically for suspension system shock/buffer parts. Fits the definition of suspension components, inferred as rubber-metal parts. |
2.5% + 85.0% | Base: 2.5% Section 301: 25.0% Section 122: 10% Steel/Aluminum/Copper Surcharge: 50%* |
| 4016.99.60.10 | Other Vulcanized Rubber Parts Inferred material is rubber. "Control Arm Bushing" fits the description of "Other vulcanized rubber articles (for automotive mechanical parts)." |
37.5% | Base: 2.5% Section 301: 25.0% Section 122: 10% |
π Detailed Explanation of Surcharge Logic for 8708.80.65.90:
The summary for8708.80.65.90highlights a unique Steel/Aluminum/Copper surcharge of 50%.
- Why? Although the bushing is rubber, it contains a metal bushing sleeve.
- Risk: If Customs determines the metal content is significant or that the item falls under metal product restrictions (Section 232 or similar), the 50% surcharge may apply on top of the other duties, leading to a total effective burden far exceeding the other codes.
- Note: The other three codes (8708.99.55.00,4016.93.10.50,4016.99.60.10) do not list this additional 50% metal surcharge in the provided data, resulting in a consistent 37.5% total.
π° III. 2026 Latest Tariff Rate Details (Including Surcharges)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Date: Current Trade Policies (Section 301 & Section 122)
π― 1. Codes: 8708.99.55.00, 4016.93.10.50, 4016.99.60.10
These three codes share the same tax structure in the provided data.
| Item | Content |
|---|---|
| Base Duty Rate | 2.5% (Ad Valorem) |
| Section 301 Duty | +25.0% (Trade Remedy Measures) |
| Section 122 Duty | +10.0% (Countermeasures) |
| Total Effective Rate | 37.5% |
| Calculation | CIF Value Γ 37.5% |
| De Minimis Exemption | β Not Applicable |
| Legal Basis Path | USITC Code β Section 301 Footnote β Section 122 Provision |
π Explanation:
- These codes are treated as standard vehicle parts or rubber articles subject to the standard 301 tariffs (25%) and Section 122 surcharges (10%).
- They avoid the metal-specific surcharge potentially applied to8708.80.65.90.
π― 2. Code: 8708.80.65.90 (High Risk)
| Item | Content |
|---|---|
| Base Duty Rate | 2.5% |
| Section 301 Duty | +25.0% |
| Section 122 Duty | +10.0% |
| Steel/Aluminum/Copper Surcharge | +50.0% (Conditional on metal content classification) |
| Total Effective Rate | 87.5% (2.5 + 25 + 10 + 50) |
| Calculation | CIF Value Γ 87.5% |
π Warning:
- This code triggers the additional 50% surcharge on steel/aluminum/copper products.
- Since control arm bushings contain metal sleeves, Customs may interpret this as a "metal product" or apply the surcharge due to the composite nature.
- Avoid this code if you can justify classification under8708.99or4016to save 50% in duties.
π οΈ IV. Customs Clearance Practical Advice (Pitfall Avoidance Guide)
β 1. Preparation Checklist (Essential Documents)
| Document | Required | Explanation |
|---|---|---|
| β Product Specification | βοΈ | Must specify: Rubber type, Metal sleeve material, Dimensions, Application Model (e.g., Toyota Camry 2020). |
| β Material Composition Statement | βοΈ | Clearly state: "Rubber outer layer, Steel inner sleeve." Crucial for distinguishing between 4016 (Rubber) and 8708 (Part). |
| β Photos (Clear & Labeled) | βοΈ | Show the rubber/metal bond. Label "Control Arm Bushing, Vehicle Part." |
| β Commercial Invoice | βοΈ | Description must match HS Code logic (e.g., "Rubber Bushing for Suspension" vs. "Steel Part"). |
| β Packing List | βοΈ | Ensure weight/volume matches declaration. |
β 2. Classification Strategy (Key Logic)
π₯ βMaterial Drives Code, Function Drives Duty!β
| Scenario | Recommended HS Code | Reasoning |
|---|---|---|
| Focus on Rubber Content | 4016.93.10.50 or 4016.99.60.10 |
Classified as "Vulcanized Rubber Articles." Avoids metal surcharge. Total 37.5%. |
| Focus on Vehicle Part | 8708.99.55.00 |
Classified as "Parts of Motor Vehicles." Standard 301/122 duties. Total 37.5%. |
| High Risk: Metal Surcharge | 8708.80.65.90 |
β Avoid if possible. The 50% metal surcharge makes it the most expensive option (87.5%). Only use if specifically required by customs precedent. |
β 3. Special Handling Tips
| Situation | Advice |
|---|---|
| Composite Material (Rubber+Metal) | Emphasize the primary function (shock absorption/rubber) or primary use (vehicle part). Do not emphasize the metal sleeve alone. |
| Customs Scrutiny | If asked about the metal sleeve, explain it is a mounting insert for the rubber bushing, not a structural metal component itself. |
| Pre-Ruling | Apply for a Pre-Ruling (US Customs & Border Protection) if shipping large volumes. This locks in the 37.5% rate and avoids the 50% metal surcharge risk. |
π V. Global Market Comparison (2026)
| Market | Likely HS Code | Estimated Duty | Notes |
|---|---|---|---|
| πΊπΈ USA | 8708.99.55.00 / 4016.99.60.10 |
37.5% | Includes 25% Sec 301 + 10% Sec 122. Avoid 8708.80.65.90 due to 50% metal surcharge. |
| π¨π³ China | 4016.93.10.50 |
~2.5% - 5% | Import duty lower. No Section 301/122. |
| πͺπΊ EU | 4016.93 / 8708.99 |
0% - 4.5% | Generally favorable for auto parts/rubber. No US-style surcharges. |
| π¨π¦ Canada | 8708.99 |
0% (USMCA) | If originating in North America, duty-free under USMCA. |
π Conclusion:
- The US market is the most complex due to Section 301 and 122 tariffs.
- Strategy: Aim for8708.99.55.00or4016codes to keep duties at 37.5%.
- Critical: Avoid8708.80.65.90to escape the 50% metal surcharge.
π VI. Common Errors & Pitfalls (Lessons Learned)
β Error 1: Declaring as "Steel Bushing"
π Consequence: Triggers Section 232 Steel Tariff (25%) + Section 301 (25%) + Sec 122 (10%) + Potential Metal Surcharge β Duty > 60-80%.
π Fix: Emphasize "Rubber Bushing with Metal Insert."
β Error 2: Using 8708.80.65.90 without verifying Metal Surcharge Applicability
π Consequence: Unexpected 50% additional duty on the metal component value or whole product.
π Fix: Pre-clear classification with CBP.
β Error 3: Vague Description "Auto Part"
π Consequence: Customs delays, reclassification to highest possible duty rate.
π Fix: Specific Description: "Control Arm Bushing, Rubber/Metal, for Suspension System, Model XYZ."
β Correct Declaration Example:
"Control Arm Bushing, Automotive Suspension Part. Consists of vulcanized rubber bonded to a steel sleeve. Used for shock absorption in vehicle suspension. HS: 8708.99.55.00"
π― VII. Conclusion: Professional Classification, Cost Optimization!
π― Key Takeaway:
πΉ Total Duty Rate is 37.5% for
8708.99.55.00,4016.93.10.50, and4016.99.60.10.
πΉ Total Duty Rate can jump to 87.5% for8708.80.65.90due to the 50% metal surcharge.
πΉ Action: Choose8708.99.55.00(Vehicle Part) or4016.99.60.10(Rubber Part) to minimize costs. Avoid8708.80.65.90unless explicitly justified.
π Pro Tip:
If your bushings are originating in Mexico or Canada, check USMCA/CUSMA benefits for duty-free entry, bypassing the 37.5% US tariffs entirely.
β¨ Precise Classification Saves Thousands!
πΌ Contact a Customs Broker for Pre-Ruling on HS Code 8708.99.55.00 vs. 4016.99.60.10!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.