dewatering pad
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 4016990500 | 20.9% | CN | US | Official Doc |
| 4016910000 | 37.7% | CN | US | Official Doc |
| 3924901050 | 13.3% | CN | US | Official Doc |
| 3924104000 | 13.4% | CN | US | Official Doc |
Product Images
AI Analysis
π Dewatering Pad (Silicone Drain Mats)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Breakdown | Professional Entry Strategy
π One: Product Definition & Classification: Do You Really Understand "Dewatering Pad"?
The Dewatering Pad (often made of silicone or silicone-rubber) is a household and kitchen accessory designed to absorb excess water from dishes, produce, or cleaning items. In international trade, its classification depends heavily on material composition and functional definition.
It is generally categorized in two ways: 1. Rubber/Elastomer Mats: If made of vulcanized rubber or elastomer, falling under heading 4016. 2. Plastic/Resin Mats: If made of plastic or synthetic resin, falling under heading 3924.
β οΈ Key Distinction Point:
- If the material is defined as "Vulcanized Rubber/Elastomer" β Classify under 4016 (Rubber articles). - If the material is defined as "Plastic/Synthetic Resin" β Classify under 3924 (Plastic tableware/kitchenware).
π¦ Two: Detailed HS Code Classification (2026 Latest Tariff Authority)
| HS Code | Product Description | Material Basis | Classification Logic |
|---|---|---|---|
4016.99.05.00 |
Dewatering Pad, Rubber/Elastomer, for household use | Vulcanized Rubber / Elastomer | Classified as "Other household articles" not elsewhere specified. |
4016.91.00.00 |
Dewatering Pad, Mat Form, Rubber/Elastomer | Vulcanized Rubber / Elastomer | Classified specifically as "Rugs and mats". |
3924.90.10.50 |
Dewatering Pad, Plastic/Resin, for household mats | Plastic / Synthetic Resin | Classified as "Other plastic articles" (general category). |
3924.10.40.00 |
Dewatering Pad, Plastic/Resin, for kitchen/bathroom use | Plastic / Synthetic Resin | Classified specifically as "Tableware, kitchen, or bathroom articles". |
π Critical Reminder:
- Material Matters: The customs declaration must explicitly state the material. "Silicone" is often interpreted as rubber (4016) or plastic (3924) depending on the specific chemical formulation and curing process. - Function vs. Form: While both look the same, the "Mat" classification (4016.91) usually attracts higher tariffs due to specific footnotes compared to "Other articles" (4016.99).
π° Three: 2026 Latest Tariff Rate Breakdown (Including Surcharges)
β Applicable Market: USA (United States)
β Origin: China (CN)
β Effective Date: From 2025 onwards (Current Policy)
π― 1. 4016.99.05.00 ββ Rubber/Elastomer Dewatering Pad (Household Articles)
| Item | Content |
|---|---|
| Base Tariff | 3.4% |
| Section 301 Surcharge (Additional Duty) | +7.5% |
| Section 122 Tariff (2025 Tariff) | +10.0% |
| Total Tax Rate | 20.9% |
| Tax Calculation | CIF Value Γ 20.9% |
| De Minimis Exemption | β No (Subject to full duties) |
| Legal Reference Path | USITC:4016.99.05.00 β 301 List 4 (7.5%) β Section 122 (10%) |
π Explanation:
- 3.4% Base: Standard Most-Favored-Nation (MFN) rate. - 7.5% Section 301: Additional tariff applied to specific Chinese rubber products. - 10% Section 122: New tariff provision effective 2025 for specific elastomer goods. - Total: 20.9% is the maximum duty to be paid.
π― 2. 4016.91.00.00 ββ Rubber/Elastomer Dewatering Pad (Rugs & Mats)
| Item | Content |
|---|---|
| Base Tariff | 2.7% |
| Section 301 Surcharge (Additional Duty) | +25.0% |
| Section 122 Tariff (2025 Tariff) | +10.0% |
| Total Tax Rate | 37.7% |
| Tax Calculation | CIF Value Γ 37.7% |
| De Minimis Exemption | β No |
| Legal Reference Path | USITC:4016.91.00.00 β 301 List 4 (25%) β Section 122 (10%) |
π Critical Warning:
- High Risk Category: Classifying a silicone mat as a "Mat/Rug" (4016.91) instead of a generic "Article" (4016.99) triggers a massive 25% Section 301 surcharge. - Result: The total duty jumps to 37.7%, making this classification significantly more expensive than4016.99.05.00. - Strategy: Ensure the product description emphasizes "Household Article" rather than just "Mat" if the material allows.
π― 3. 3924.90.10.50 ββ Plastic/Synthetic Resin Dewatering Pad (Other Plastic Articles)
| Item | Content |
|---|---|
| Base Tariff | 3.3% |
| Section 301 Surcharge (Additional Duty) | 0.0% |
| Section 122 Tariff (2025 Tariff) | +10.0% |
| Total Tax Rate | 13.3% |
| Tax Calculation | CIF Value Γ 13.3% |
| De Minimis Exemption | β No |
| Legal Reference Path | USITC:3924.90.10.50 β Section 122 (10%) |
π Explanation:
- Lowest Surcharge: Unlike the "Mat" category, "Other Plastic Articles" under 3924 often do not attract the 25% Section 301 surcharge. - Total: Only 13.3% (Base 3.3% + Section 122 10%). This is the most cost-effective classification for plastic-based pads.
π― 4. 3924.10.40.00 ββ Plastic/Synthetic Resin Dewatering Pad (Kitchen/Bathroom)
| Item | Content |
|---|---|
| Base Tariff | 3.4% |
| Section 301 Surcharge (Additional Duty) | 0.0% |
| Section 122 Tariff (2025 Tariff) | +10.0% |
| Total Tax Rate | 13.4% |
| Tax Calculation | CIF Value Γ 13.4% |
| De Minimis Exemption | β No |
| Legal Reference Path | USITC:3924.10.40.00 β Section 122 (10%) |
π Note:
- Similar to3924.90.10.50, this classification avoids the 25% Section 301 tax. - Slightly higher base rate (3.4% vs 3.3%) due to specific "Kitchen/Bathroom" subheading. - Total: 13.4%.
π οΈ Four: Practical Customs Clearance Advice (Pitfall Avoidance Guide)
β 1. Material Declaration Strategy (Crucial)
| Strategy | Action | Impact |
|---|---|---|
| If Silicone is "Soft/Stretchy" | Declare as "Plastic/Synthetic Resin" | Aim for 3924 β ~13.4% Total Duty. |
| If Silicone is "Vulcanized Rubber" | Declare as "Elastomer" but avoid "Mat" | Aim for 4016.99 β 20.9% Total Duty. |
| Avoid | Do NOT declare as "Rug/Mat" if using Rubber | Prevents the 37.7% duty trap (4016.91.00). |
π₯ Golden Rule: "Plastic (3924) is cheaper than Rubber (4016); Generic (99) is cheaper than Mat (91)!"
β 2. Documentation Checklist (Must-Have)
| Document | Requirement | Purpose |
|---|---|---|
| β Material Safety Data Sheet (MSDS) | Must specify chemical composition | Determines if it's Rubber (4016) or Plastic (3924). |
| β Product Photos | Show texture and flexibility | Proves if it's a "flexible mat" or a "rigid plastic article". |
| β Technical Specification | Mention "Vulcanized" or "Synthetic Resin" | Supports the HS Code selection explicitly. |
| β Commercial Invoice | Description: "Silicone Dewatering Pad (Plastic)" | Avoids ambiguity; do not just write "Mat". |
| β Packing List | Quantity and dimensions | Helps customs verify volume/weight ratios. |
β 3. Classification Optimization Tips
| Scenario | Recommended Action | Result |
|---|---|---|
| Product is truly rubber | Use 4016.99.05.00 (Household) instead of 4016.91.00.00 (Mat) |
Saves 16.8% (37.7% β 20.9%). |
| Product is flexible plastic | Use 3924.10.40.00 or 3924.90.10.50 |
Saves 25% (37.7% β 13.4%). |
| Unclear Material | Submit a Material Lab Report | Prevents random classification by Customs. |
π Five: Global Market Comparison (2026)
| Market | Recommended HS Code | Estimated Duty | Key Requirement |
|---|---|---|---|
| πΊπΈ USA | 3924.10.40.00 |
13.4% | Avoid Section 301 (25%) by not classifying as "Rug". |
| πͺπΊ EU | 4016 or 3924 |
~0-4% | No Section 301; focus on CE marking. |
| π¨π¦ Canada | 3924 |
~0-8% | CUSMA rules may apply if origin is certified. |
| π¦πΊ Australia | 3924 |
~5-10% | Low tariffs for plastics. |
π Conclusion:
- The USA is the only market imposing the severe Section 301 (25%) and Section 122 (10%) surcharges. - China-origin silicone pads must be carefully classified to avoid the 37.7% "Mat" tax. - Plastic classification (3924) is the safest and cheapest path (13.3-13.4%).
π Six: Common Errors & Pitfalls (Lessons Learned)
β Mistake 1: Calling a plastic pad a "Rubber Mat".
π Consequence: Tax jumps to 37.7% instead of 13.4%. Overpayment!
β Mistake 2: Declaring "Silicone Mat" without specifying material type.
π Consequence: Customs may default to the highest tariff (4016.91.00). Risk of Audit.
β Mistake 3: Ignoring "Section 122" in 2025.
π Consequence: Failing to declare the 10% additional duty leads to back taxes + penalties.
β Correct Practice:
"Silicone Kitchen Dewatering Mat (Synthetic Resin), Model XYZ, FDA Approved, NSF Certified."
π― Seven: Conclusion: Smart Classification, Lower Costs!
π― Remember the Mantra:
πΉ "Plastic (3924) = 13.4% (Best)!"
πΉ "Rubber General (4016.99) = 20.9% (Okay)!"
πΉ "Rubber Mat (4016.91) = 37.7% (Worst! Avoid!)!"
πΉ "HS Code is Life; Wrong Code = Double Tax!"
π Pro Tip:
If you manufacture in Vietnam, Mexico, or Thailand, you might qualify for Section 301/122 exemptions, reducing duties to 0-5%.
Action: Apply for a Binding Ruling with US Customs before shipping to lock in the correct HS Code and tariff rate.
π£ Take Action Now:
π Contact a professional customs broker + Provide Material Specs + Request HS Code Pre-Ruling
π Clear your Dewatering Pads with minimum cost and maximum efficiency!
β¨ Professional Customs Clearance Starts with Precise Classification!
πΌ Every cent of your cost deserves precise calculation!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.