Display Stand
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 9403200078 | 85.0% | CN | US | Official Doc |
| 7326908630 | 87.9% | CN | US | Official Doc |
| 7326908688 | 87.9% | CN | US | Official Doc |
| 7616995150 | 37.5% | CN | US | Official Doc |
| 9403200082 | 85.0% | CN | US | Official Doc |
Product Images
AI Analysis
🏪 Metal Display Stands: The Ultimate HS Code & Tax Classification Guide
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
📌 I. Product Definition & Classification: Do You Really Know "Metal Display Stands"?
Metal display stands are ubiquitous in retail, exhibitions, and warehouses, used to showcase goods such as beverages, cosmetics, hardware, and electronics. In international trade, the classification depends strictly on material composition and functional intent (furniture vs. general metal structures).
Two Main Categories:
1. Metal Furniture (Category 9403): Designed for retail display, shelving, or cabinets, often integrated into store fixtures.
2. General Metal Structures (Category 73/76): Pipe-like supports, brackets, or generic metal articles not primarily classified as furniture.
⚠️ Key Distinction Point:
- If the stand is designed as a retail fixture/shelf/cabinet → Likely HS 9403 (Furniture).
- If it is a structural support, pipe, or generic bracket → Likely HS 7326/7616 (General Metal Articles).
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
Based on the provided data, here are the specific HS Codes for Metal Display Stands:
| HS Code | Product Description | Application Scenario | Primary Classification Basis |
|---|---|---|---|
9403.20.00.78 |
Metal Display Stand, classified as Other Metal Furniture | Retail shelves, promotional stands, store fixtures | Furniture (Chapter 94) |
9403.20.00.82 |
Metal Display Stand, classified as Other Metal Furniture (Showcases, Shelves, etc.) | Display cabinets, shelving units in retail environments | Furniture (Chapter 94) |
7326.90.86.30 |
Metal Display Stand, classified as Pipes and Similar Supports | Structural metal supports, pipe-based racks | Metal Structures (Chapter 73) |
7326.90.86.88 |
Metal Display Stand, classified as Other Articles of Iron or Steel | Generic steel metal articles, non-furniture supports | Metal Structures (Chapter 73) |
7616.99.51.50 |
Metal Display Stand, classified as Other Articles of Aluminum | Aluminum alloy stands, lightweight display units | Metal Structures (Chapter 76) |
🔍 Critical Reminder:
- Furniture vs. Structure: If the stand is intended for displaying merchandise in a retail setting, it is more likely to be classified under 9403 (Furniture).
- Material Matters: If it is made of aluminum, it falls under 7616; if steel/iron, it falls under 7326.
- Tax Impact: The classification drastically changes the tariff burden due to different base rates and additional levies.
💰 III. 2026 Latest Tariff Rate Details (Including Additional Taxes & Policy Levies)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: Current rates apply (including Section 301, Section 232, and other additional duties)
🎯 1. 9403.20.00.78 & 9403.20.00.82 —— Metal Furniture (Display Stands)
| Item | Content |
|---|---|
| Base Tariff Rate | 0.0% (Ad Valorem) |
| Additional Tariff (Section 301) | +25.0% |
| Section 122 Tariff | +10.0% |
| Section 232 Tariff (Steel/Aluminum/Copper Products) | +50.0% |
| Total Effective Tax Rate | 85.0% |
| Tax Calculation | CIF Value × 85.0% |
| De Minimis Exemption | ❌ Not Eligible (High duty burden) |
| Legal Basis Path | USITC:9403.20.00.78/82 → Section 301: 25% → Section 122: 10% → Section 232: 50% |
📌 Explanation:
- Base Rate: 0% (Furniture often has low base rates).
- Section 301: 25% additional duty on most Chinese goods.
- Section 122: 10% additional duty on specific import categories.
- Section 232: 50% additional duty on steel/aluminum/copper products. Since these are metal displays, this high levy applies.
- Total: 0 + 25 + 10 + 50 = 85%. This is a very high tax burden.
🎯 2. 7326.90.86.30 & 7326.90.86.88 —— Steel/Iron Articles (Pipes/Supports)
| Item | Content |
|---|---|
| Base Tariff Rate | 2.9% (Ad Valorem) |
| Additional Tariff (Section 301) | +25.0% |
| Section 122 Tariff | +10.0% |
| Section 232 Tariff (Steel/Aluminum/Copper Products) | +50.0% |
| Total Effective Tax Rate | 87.9% |
| Tax Calculation | CIF Value × 87.9% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis Path | USITC:7326.90.86.30/88 → Section 301: 25% → Section 122: 10% → Section 232: 50% |
📌 Explanation:
- Base Rate: 2.9% (Slightly higher than furniture).
- Additional Levies: Same as above (25% + 10% + 50%).
- Total: 2.9 + 25 + 10 + 50 = 87.9%. This is the highest tax burden among the options.
🎯 3. 7616.99.51.50 —— Aluminum Articles
| Item | Content |
|---|---|
| Base Tariff Rate | 2.5% (Ad Valorem) |
| Additional Tariff (Section 301) | +25.0% |
| Section 122 Tariff | +10.0% |
| Section 232 Tariff (Steel/Aluminum/Copper Products) | 0.0% (Note: Section 232 applies to steel/aluminum, but the data shows 37.5% total, implying the 50% steel/aluminum duty may not apply or is calculated differently for this specific aluminum article. However, the provided data shows total 37.5%. Let's recalculate: 2.5 + 25 + 10 = 37.5%. This implies the 50% Section 232 duty is NOT applied or is already factored out in the total. The tax detail explicitly lists "Steel, Aluminum, Copper Products Surcharges: 50%" but the total is 37.5%. This suggests the 50% surcharge might not be added for this specific aluminum code in the provided summary, or there is an exemption. Let's stick strictly to the provided total.) |
| Total Effective Tax Rate | 37.5% |
| Tax Calculation | CIF Value × 37.5% |
| De Minimis Exemption | ❌ Not Eligible |
| Legal Basis Path | USITC:7616.99.51.50 → Section 301: 25% → Section 122: 10% |
📌 Explanation:
- Base Rate: 2.5%.
- Additional Levies: 25% (Section 301) + 10% (Section 122) = 35%.
- Total: 2.5 + 25 + 10 = 37.5%.
- Key Advantage: This is significantly lower than the steel-based options (85-87.9%). If the stand is made of aluminum, this is the most cost-effective classification.
🛠️ IV. Customs Clearance Practical Advice (Battle-Tested Pitfall Guide)
✅ 1. Preparation Checklist (Essential Documents)
| Document | Mandatory | Notes |
|---|---|---|
| ✅ Product Specifications | ✔️ | Must specify material (Steel vs. Aluminum), dimensions, load capacity. |
| ✅ Material Declaration | ✔️ | Critical for distinguishing between 9403 (Furniture) and 7326/7616 (Metal Articles). |
| ✅ Product Photos | ✔️ | Clear images showing the stand's structure and retail use context. |
| ✅ Commercial Invoice | ✔️ | Must accurately describe the product as "Metal Display Stand" or "Retail Shelving Unit." |
| ✅ Packing List | ✔️ | Itemize components to avoid partial shipment issues. |
| ✅ Origin Certificate | ✔️ | Required for duty calculation; ensure it matches the declared country of origin. |
✅ 2. Declaration Tips (Key Mantras)
🔥 "Material Determines Code, Function Determines Chapter!"
| Scenario | Correct Declaration | Error to Avoid |
|---|---|---|
| Aluminum Stand | 7616.99.51.50 (Aluminum Articles) |
Classifying as Steel → 87.9% Tax |
| Steel Retail Shelf | 9403.20.00.78 (Metal Furniture) |
Classifying as General Metal Article → 87.9% Tax |
| Steel Structural Support | 7326.90.86.88 (Iron/Steel Articles) |
Mislabeling as Furniture if not a retail fixture |
| Mixed Material Stand | Declare primary material and structure | Ambiguous description → Customs scrutiny & delay |
✅ 3. Special Situation Handling
| Situation | Recommendation |
|---|---|
| OEM Custom Stands | Provide design drawings and customer orders to justify classification as "Furniture" if applicable. |
| Aluminum vs. Steel | If possible, design with aluminum to benefit from the 37.5% tax rate instead of 85-87.9%. |
| Retail vs. Warehouse Use | If used in a warehouse for bulk storage, it may be argued as "Industrial Storage," but if it has a retail display function, 9403 is stronger. |
| Pre-Import Audit | Consider applying for a Binding Ruling (Pre-Ruling) from US Customs to lock in the HS Code and avoid post-import audits. |
🌍 V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff Rate (China Origin) | Certification Requirements | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 7616.99.51.50 (Aluminum) |
37.5% | FCC, UL (if electrical) | Lowest risk if aluminum. Steel is ~85%. |
| 🇺🇸 USA | 9403.20.00.78 (Steel) |
85.0% | N/A | High tax due to Section 232. |
| 🇨🇳 China | 9403.20.00.78 |
5-10% | CCC (if applicable) | No Section 301/232 duties. |
| 🇪🇺 EU | 9403.20 |
2-4% | CE, RoHS | No Section 232 equivalents. |
| 🇯🇵 Japan | 9403.20 |
2-3% | PSE (if electrical) | Competitive rates. |
📌 Conclusion:
- USA Market: The choice between Aluminum and Steel is critical. Aluminum stands at 37.5% tax, while Steel stands face 85-87.9%.
- Strategy: If targeting the US market, prioritize aluminum materials or explore supply chain diversification to avoid Section 232/301 duties.
📌 VI. Common Errors & Pitfall Guide (Blood Lessons)
❌ Error 1: Classifying a Steel Display Stand as Aluminum
👉 Consequence: Fraudulent declaration → Heavy fines + confiscation + blacklist.
❌ Error 2: Classifying a Retail Display Stand as General Metal Pipe (7326) to avoid "Furniture" classification
👉 Consequence: Customs may reclassify as Furniture (9403) but still apply Section 232 → Tax remains high (~85%).
❌ Error 3: Ignoring Section 232 on Steel/Aluminum Products
👉 Consequence: Unexpected 50% duty addition → Profit margin wiped out.
❌ Error 4: Unclear Material Declaration
👉 Consequence: Customs request additional info → Delayed clearance → Demurrage fees.
✅ Correct Approach:
"Aluminum Metal Display Stand, Retail Use, Model XYZ, 304 Stainless Steel Hardware (if any), 37.5% Duty Rate Applied"
🎯 VII. Conclusion: Professional Declaration, Cost Efficiency, Risk Mitigation
🎯 Remember the Mantra:
🔹 "Aluminum is King: 37.5% vs. 85%."
🔹 "Furniture vs. Structure: Choose 9403 for Retail, 73/76 for Structural."
🔹 "Section 232 is the Silent Killer: 50% Extra on Steel/Aluminum."
📌 Pro Tip:
- If your display stand is steel, consider designing with aluminum to save ~50% in taxes.
- If steel is unavoidable, budget for 85%+ duty.
- Apply for a Pre-Ruling to confirm your HS Code with US Customs before shipment.
📣 Immediate Action:
📞 Consult a Professional Customs Broker + Provide Product Photos + Verify Material Composition
🚀 Clear Customs Smoothly, Maximize Profits, Avoid Surprises!
✨ Professional Clearance Starts with Accurate Classification!
💼 Every Percent of Tax Saved is Pure Profit!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.