hat clips
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3926908500 | 24.0% | CN | US | Official Doc |
| 3926909989 | 22.8% | CN | US | Official Doc |
| 9615906000 | 21.0% | CN | US | Official Doc |
| 9615904000 | 15.3% | CN | US | Official Doc |
| 7326200090 | 88.9% | CN | US | Official Doc |
| 7326908688 | 87.9% | CN | US | Official Doc |
Product Images
AI Analysis
Based on the provided, here is the comprehensive Wiki-style guide for Hair Clips, Combs, and Plastic Fasteners, tailored to ensure accurate HS Code classification and optimized customs clearance strategies.
π Hair Clips, Combs & Plastic Fasteners: Global Trade Classification & 2026 Clearance Strategy
π HS Code Reference & Customs Guide | 2026 Latest Tariff Breakdown | Professional Clearance Strategy
π One, Product Definition & Classification: Do You Truly Understand "Hair Clips"?
Hair clips, combs, and fasteners are ubiquitous items in the personal care and fashion accessories market. However, in international trade, their classification depends heavily on the material composition, function, and packaging state.
The provided covers four distinct categories: 1. General Hair Accessories (Metal/Iron/Steel): Hard-to-classify metal items falling under generic "Other articles" chapters. 2. Rubber/Plastic Hair Accessories: The most common category for modern clips, combs, and curlers. 3. Plastic Fasteners: Clips designed for mechanical attachment (e.g., packaging, industrial). 4. General Plastic Articles: Miscellaneous plastic items not covered by specific headings.
β οΈ Critical Distinction:
- Material Matters: Iron/Steel clips have a 0% base tariff but trigger massive 50% steel surcharges. Plastic clips have 5.3%-6.5% base but are safer from steel surcharges. - Function Matters: Are these for hair (Heading 9615) or mechanical fastening (Heading 3926)? Misclassification leads to 10%+ tariff jumps.
π¦ Two, Detailed HS Code Classification Matrix (2026 Latest Tariff Data)
| HS Code | Product Description | Material | Base Tariff | Surcharge | Total Tariff | Classification Logic |
|---|---|---|---|---|---|---|
| 7326.20.00.90 | Other articles of iron or steel: Wire articles (e.g., Metal hair clips) | Iron/Steel | 0.0% | 50.0% (Steel/Al/Cu) | 50.0% | Metal wire construction triggers Section XV surcharges. |
| 7326.90.86.88 | Other articles of iron or steel: Other (General metal accessories) | Iron/Steel | 2.9% | 50.0% (Steel/Al/Cu) | 77.9% | Broad category for metal items not in wire section; high risk. |
| 9615.90.60.00 | Combs, hair-slides, hairpins, curling grips (Others) | Mixed/Metal | 11.0% | 0.0% | 11.0% | General hair accessories (non-rubber/plastic or unlisted). |
| 9615.90.40.00 | Combs, hair-slides... Of rubber or plastics | Rubber/Plastic | 5.3% | 0.0% | 5.3% | Best for Plastic Clips: Must be rubber/plastic, no fake gems. |
| 3926.90.85.00 | Plastic Fasteners (Clips for mechanical attaching) | Plastic | 6.5% | 7.5% | 14.0% | Functional Use: Used for attaching items mechanically, not hair. |
| 3926.90.99.89 | Other articles of plastics: Other (Misc. Plastic Clips) | Plastic | 5.3% | 7.5% | 12.8% | Residual category for plastic items not fitting "Fasteners". |
π Key Insight:
- Avoid Iron/Steel (73xx): If possible, use plastic/rubber (9615) to avoid the 50% Steel Surcharge. - Hair vs. Fastener: Hair clips go to 9615; Industrial clips for packaging go to 3926.
π° Three, 2026 Tariff Rate Deep Dive (Policy & Legal Basis)
β Applicable Region: General International Trade (Based on provided Data)
β Context: Tariffs include Base Rates + Specific Add-ons (Steel/Al/Cu Surcharges).
π― 1. 9615.90.40.00 β The Golden Category for Plastic Hair Clips
Description: Combs, hair-slides, hairpins, curling grips... Of rubber or plastics, not set with imitation pearls or imitation gemstones. * Base Rate: 5.3% (Lowest among hair accessories). * Surcharge: 0.0% (Safe from Steel/Al/Cu restrictions). * Total Cost: 5.3%. * Legal Logic: This is the specific subheading for rubber/plastic hair items. It excludes metal items (which jump to 9615.90.60 or 73xx). * π‘ Strategy: Ensure your clips are 100% plastic/rubber. If even 10% is metal, customs may reclassify to the higher tax bracket.
π― 2. 7326.20.00.90 β The "Steel Trap" for Metal Wire Clips
Description: Other articles of iron or steel: Articles of iron or steel wire Other. * Base Rate: 0.0%. * Surcharge: 50.0% (Steel, Aluminum, Copper products surcharge). * Total Cost: 50.0%. * Legal Logic: Any item made of iron/steel wire falls under Section XV. Even though the base is 0%, the 50% steel surcharge makes it prohibitively expensive. * β οΈ Warning: Do not ship metal wire hair clips if you can substitute with plastic! The 50% cost difference will kill your margin.
π― 3. 3926.90.85.00 β Plastic Fasteners (Mechanical)
Description: Fasteners, in clips suitable for use in a mechanical attaching device. * Base Rate: 6.5%. * Surcharge: 7.5% (General plastic surcharge). * Total Cost: 14.0%. * Legal Logic: This is for clips used to attach things (e.g., cable ties, packaging clips), NOT for hair. * π‘ Strategy: If selling "cable clips" or "packaging clips," use this code. If selling "hair clips," use 9615.90.40.00.
π οΈ Four, Customs Clearance Practical Advice (Real-World Pitfalls)
β 1. Material Declaration Strategy (The "Plastic vs. Metal" Battle)
| Scenario | Correct Declaration | Risk if Wrong |
|---|---|---|
| Plastic Hair Clips | HS Code: 9615.90.40.00 Material: 100% Plastic/Rubber |
If declared as Metal: Tax jumps from 5.3% to 50%+. |
| Metal Wire Clips | HS Code: 7326.20.00.90 Material: Iron/Steel |
50% Total Tax. Very high cost. |
| Mixed Material Clips | Separate by material or use the Highest Tax code (Metal) | Customs will inspect and tax the entire batch at the highest rate. |
π Pro Tip: If your hair clips have a metal spring inside plastic housing, declare carefully. If the metal is minor, argue for 9615.90.40.00 (Plastic dominant). If the metal is structural (wire), you must use 7326 (50% tax).
β 2. Packaging & Description Standards
π₯ "Name Accuracy" Rule: - Bad: "Plastic Accessories", "General Clips", "Hair Stuff". - Good: "Plastic Hair Clips, Unadorned (No Pearls/Gems), 9615.90.40.00". - Good: "Mechanical Fastener Clips, Plastic, for Packaging, 3926.90.85.00".
| Required Document | Detail | Why It Matters |
|---|---|---|
| Commercial Invoice | Must explicitly state "Of Rubber or Plastics" for 9615.90.40.00. | Proves eligibility for 5.3% tax; prevents 50% steel surcharge. |
| Product Photos | Close-up of material (flexible plastic vs. rigid wire). | Customs uses photos to verify "Wire" vs. "Plastic". |
| Bill of Materials | List material composition % (e.g., 98% Plastic, 2% Metal). | Helps avoid "Mixed Material" reclassification. |
β 3. Special "Gemstone" Exclusion
β οΈ Critical for 9615.90.40.00: This code specifically excludes items set with imitation pearls or imitation gemstones. - If your clip has a fake diamond or pearl attached β Do NOT use 9615.90.40.00. - You must use 9615.90.60.00 (Tax: 11.0%) or potentially a higher code if considered a jewelry item. - Impact: 5.3% β 11.0% (Double the tax!).
π Five, Global Market Comparison & Strategy
| Destination | Recommended HS Code | Estimated Total Tax | Key Requirement |
|---|---|---|---|
| USA / Global (Steel Surcharge Applied) | 9615.90.40.00 (Plastic) | 5.3% | Must be plastic. Avoid metal wires. |
| USA / Global (Steel Surcharge Applied) | 7326.20.00.90 (Metal Wire) | 50.0% | Avoid if possible. |
| USA / Global (Plastic) | 3926.90.85.00 (Mechanical) | 14.0% | Only for non-hair mechanical fasteners. |
| Non-Surcharge Markets | 9615.90.60.00 (Mixed) | 11.0% | Base rate only, no 50% surcharge. |
π Conclusion: 1. Switch to Plastic: If you are shipping metal hair clips, redesign to plastic/rubber to save ~45% in taxes (50% vs 5.3%). 2. Avoid Gems: Keep clips simple to stay in the 5.3% bracket. 3. Clear Separation: Do not mix mechanical fasteners (3926) with hair accessories (9615) in one shipment without clear labeling.
π Six, Common Errors & "Blood & Tears" Warnings
β Error 1: The "Metal Spring" Blindspot
π Scenario: Shipping plastic hair clips with internal metal springs.
π Result: Customs deems it "Metal Articles" β Applies 50% Steel Surcharge.
π Fix: Use all-plastic spring mechanisms or declare separately.
β Error 2: "Decorated" vs. "Plain"
π Scenario: Shipping clips with fake rhinestones under code 9615.90.40.00.
π Result: Code is invalid for "set with imitation gemstones" β Tax jumps to 11.0% + Penalties.
π Fix: Check code 9615.90.60.00 or similar for decorated items.
β Error 3: Confusing "Hair Clip" with "Fastener"
π Scenario: Using 3926.90.85.00 for a hair clip.
π Result: Customs rejects as "Incorrect Function" β Delay + Re-classification to 9615 (11% or 50%).
π Fix: Ensure function description matches the code (Hair vs. Mechanical).
π― Seven, Final Checklist for Shipment
π Before You Ship, Ask: 1. Is it Plastic/Rubber? β Yes β Use 9615.90.40.00 (5.3%). 2. Is it Iron/Steel Wire? β Yes β Use 7326.20.00.90 (50% tax). β οΈ RED FLAG. 3. Does it have Fake Pearls/Gems? β Yes β Do NOT use 9615.90.40.00. 4. Is it for attaching cables/furniture? β Yes β Use 3926.90.85.00 (14%).
π Expert Tip:
"Plastic is King, Steel is the Enemy (in this sector)."
If you can design your hair clips without metal wire components, you save ~45% in total tax costs instantly.
Always declare "Of Rubber or Plastics" clearly on the invoice to trigger the lower 5.3% rate.
β¨ Precise Classification = Maximum Profit.
πΌ Don't let a 50% steel surcharge eat your margins!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.