individual can silver

🥈 Individual Cans & Silver-Colored Containers (Steel & Aluminum)

🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
📌 I. Product Definition & Classification: Do You Know "Individual Cans"?

In international trade, "individual cans" typically refer to small-volume metal containers used for packaging food, beverages, aerosols, or other goods. The key distinction lies in the material (Iron/Steel vs. Aluminum) and capacity (< 50L or < 300L).

Iron/Steel Containers (of capacity < 50 liters): * Soldered/Crimped Cans: Rigid containers closed by soldering or crimping (e.g., standard food tins). * Other Steel Containers: Other steel drums/cans under 50L not fitted with mechanical equipment.

Aluminum Containers: * Small Aluminum Cans: Aluminum containers ≤ 300L, specifically those ≤ 20L or ≤ 355ml (often aerosol or beverage cans).

⚠️ Key Distinction Point:
- If made of Iron/Steel and capacity < 50L →归类 to 7310
- If made of Aluminum and capacity ≤ 300L → 归类 to 7612
- Note: The term "Silver" in the user input likely refers to the appearance (e.g., aluminum) or material type. However, under HS Code, Material Composition (Iron/Steel vs. Aluminum) is the primary sorting criteria, not just color. Pure "Silver Metal" containers are rare; usually, "silver-colored" implies Aluminum or Tinplate (Steel).

📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)

🔍 Critical Reminder:
- "Silver" Appearance ≠ HS Code: If the container looks silver but is made of Steel (tinplate), use 7310. If made of Aluminum, use 7612.
- Capacity is Key: For Steel, the threshold is < 50 Liters for sub-heading 7310.21/29. For Aluminum, the heading 7612 covers up to 300 Liters.
- Plastic Exclusion: If the item is actually plastic (even if silver-colored), it falls under 3923, which has 0% Tax. Ensure material certification is clear.

💰 III. 2026 Latest Tariff Rate Details (Including Surcharges & Policy Add-ons)

✅ Applicable Country: United States (US)
✅ Origin: China (CN) (Based on tax details in DATA)
✅ Effective Time: Current (2025/2026 Period)

🎯 1. 7310.21.00.75 & 7310.29.00.65 —— Iron/Steel Containers (< 50L)

📌 Explanation:
- Steel products are heavily targeted. The DATA indicates a 50% surcharge specifically for "Steel, Aluminum, Copper products" AND a 25% general additional tariff.
- Total: 75%. This is an extremely high barrier.
- Risk: Misclassifying steel cans as plastic (3923) to avoid tariff is high-risk and subject to severe penalties if material analysis proves steel.

🎯 2. 7612.90.10.45 —— Aluminum Containers (≤ 20L / ≤ 355ml)

📌 Note:
- Aluminum containers have a lower base tariff (5.7%) but still carry the 25% Section 301 surcharge.
- Total: 30.7%. Significantly lower than steel (75%), but still substantial.
- Specifics: This code applies to cans ≤ 355ml with circular cross-sections (e.g., soda/beverage cans, aerosol cans).

🎯 3. 3923.30.00.90 & 3923.10.90.00 —— Plastic Containers

📌 Note:
- If the "individual can" is actually plastic (even if silver/painted), the tariff is 0%.
- Verification: Customs may require material composition certificates (e.g., SGS test) to prove it is NOT metal.

🛠️ IV. Customs Clearance Practical Advice (Battle-Tested Pitfall Guide)

✅ 1. Document Checklist (Non-Negotiable)

✅ 2. Declaration Tips (Key Mantras)

🔥 "Material First, Capacity Second, Closure Third!"

📌 Tip:
- Do not use "Silver" as the product name. Use "Aluminum Can" or "Steel Tin".
- If the container is heat-insulated or has mechanical equipment, it does NOT fit these codes. These codes are for simple containers without mechanical/thermal equipment.

✅ 3. Special Case Handling

🌍 V. Global Market Clearance Comparison (2026 Latest)

📌 Conclusion:
- USA imposes massive tariffs on metal packaging from China.
- Steel (75%) is significantly more expensive than Aluminum (30.7%) or Plastic (0%).
- Strategy: If possible, switch to Plastic packaging for the US market to save 30-75% in duties, provided material properties allow.

📌 VI. Common Errors & Pitfall Guide (Blood & Tears Lessons)

❌ Error 1: Declaring "Silver Cans" as Plastic (3923) without proof.
👉 Consequence: Customs performs material test → Fails → 75% Back Tax + Penalty.

❌ Error 2: Misclassifying Soldered Steel Cans as "Other Steel" (7310.29) to avoid specific scrutiny.
👉 Consequence: Incorrect classification → Delay + Possible Audit. (Note: Tax rate is same 75%, but accuracy is key).

❌ Error 3: Ignoring Capacity Limits.
👉 Consequence: If a steel drum is 51L, it falls out of 7310.21/29. Must check other headings. Misdeclaration → Rejection.

❌ Error 4: Not declaring Food Contact Use.
👉 Consequence: If for food, FDA registration may be required. Missing this → Goods held at port.

✅ Correct Approach:

"Aluminum Aerosol Can, 355ml, Circular Cross-Section, For Paint Use, Made of 100% Aluminum" → 7612.90.10.45
"Steel Food Can, 400g, Soldered Lid, Tinplate, For Soup" → 7310.21.00.75

🎯 VII. Conclusion: Professional Declaration, Save Costs, Avoid Risks!

🎯 Remember the Mantra:

🔹 "Steel is 75%, Aluminum is 30.7%, Plastic is 0%!"
🔹 "Don't trust 'Silver' color, trust the Material Certificate!"
🔹 "Capacity <50L for Steel, ≤355ml for Aluminum Specifics!"

📌 Small Tip:
If you are importing small quantities (< $800), consider if Plastic alternatives are viable to utilize De Minimis (0% duty). For Steel/Aluminum, De Minimis is generally NOT available due to high tariffs.

📣 Immediate Action:

📞 Contact your Customs Broker + Provide Material Test Report + Confirm Closure Type (Soldered/Crimped vs. Other).
🚀 Clear Customs Smoothly, Minimize Tax Burden, Protect Your Profit Margins!

✨ Professional Clearance Starts with Accurate Classification!
💼 Every Percent Saved is Pure Profit!