instrument stand
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 9209991000 | 23.2% | CN | US | Official Doc |
| 9209922000 | 13.9% | CN | US | Official Doc |
| 7616995170 | 37.5% | CN | US | Official Doc |
| 9403200090 | 85.0% | CN | US | Official Doc |
| 9403608093 | 35.0% | CN | US | Official Doc |
Product Images
AI Analysis
πΈ Instrument Stand (Guitar Stand)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Entry Strategy
π I. Product Definition & Classification: What Exactly is an "Instrument Stand"?
An Instrument Stand (specifically a Guitar Stand in this context) is a support device used to hold musical instruments upright or horizontally when not in use. In international trade, its classification depends heavily on its material, form (foldable vs. rigid), and intended use.
β οΈ Key Classification Nuances:
- If it is specifically designed for musical instruments and fits the definition of a "part/accessory of musical instruments," it may fall under Chapter 92.
- If it is a general-purpose folding stand (metal/plastic) without specific instrument features, it might be classified under Chapter 76 (Aluminum articles) or Chapter 94 (Furniture/Parts).
- Material matters: Wooden stands often fall under Furniture (Ch 94), while metal/aluminum stands may fall under General Metal Articles (Ch 76) or Instrument Parts (Ch 92).
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority Cross-Reference)
Based on the provided data, here are the four most likely HS Code classifications for a Guitar/Instrument Stand, ranging from the most favorable to the least favorable tariffs.
| HS Code | Product Description | Key Characteristics | Total Tax Rate (China to US) |
|---|---|---|---|
9209.92.20.00 |
Parts/Accessories of Musical Instruments (Foldable Instrument Stand) |
Specifically fits the definition of a foldable support for instruments under Chapter 92. | 13.9% (Lowest Rate) |
9209.99.10.00 |
Other Parts/Accessories of Musical Instruments (Sheet/Score Stand) |
Foldable stand for holding instruments or sheet music. Broadly covers musical accessories not specifically listed elsewhere. | 23.2% |
9403.60.80.93 |
Other Wooden Furniture (Wooden/Metal Support) |
Classified as furniture/support. Assumes wooden or mixed material construction fitting "other furniture" logic. | 35.0% |
7616.99.51.70 |
Other Articles of Aluminum (Aluminum Casting/Forging) |
Made primarily of aluminum or plastic, classified as general aluminum articles (forging category). | 37.5% |
9403.20.00.90 |
Metal Furniture (Steel/Aluminum/Copper Parts) |
Classified as metal furniture parts/accessories. High tariff due to material-specific surcharges. | 85.0% (Highest Rate) |
π Critical Insight:
-9209.92.20.00is the "Golden Ticket": If your stand is clearly a foldable instrument support, this is the preferred code with the lowest duty (13.9%).
-9403.20.00.90is the "Danger Zone": If customs views it as a generic metal furniture part, the tariff jumps to 85% due to steel/aluminum/copper surcharges.
- Material Misclassification: Claiming "Plastic" but using Aluminum triggers the7616code (37.5%). Claiming "Wood" but using Steel triggers9403.20(85%).
π° III. 2026 Latest Tariff Rate Breakdown (Including Section 301 & IEEPA Surcharges)
β Applicable Country: United States (US)
β Country of Origin: China (CN)
β Effective Date: Post-November 2025 (Includes Section 301 & IEEPA penalties)
π― 1. 9209.92.20.00 β RECOMMENDED: Foldable Instrument Stand
| Item | Detail |
|---|---|
| Base Duty Rate | 3.9% |
| Section 301 Surcharge | 0.0% (Note: Data indicates 0% for this specific subheading, unlike broader categories) |
| IEEPA Surcharge | 10% (Targeting specific Chinese imports) |
| Total Tax Rate | 13.9% |
| Calculation Basis | CIF Value Γ 13.9% |
| De Minimis Exemption? | β No (De minimis does not apply to Section 301/IEEPA goods) |
| Legal Path | USITC:9209.92.20.00 β IEEPA:9903.01.24 |
π Explanation:
- This code benefits from a 0% Section 301 surcharge according to the provided data, making it the most cost-effective option.
- The 10% IEEPA tax is standard for many Chinese imports.
- Strategy: Ensure product descriptions emphasize "Foldable Instrument Support" to justify this classification.
π― 2. 9209.99.10.00 β Alternative: General Musical Accessory Stand
| Item | Detail |
|---|---|
| Base Duty Rate | 5.7% |
| Section 301 Surcharge | 7.5% |
| IEEPA Surcharge | 10% |
| Total Tax Rate | 23.2% |
| Calculation Basis | CIF Value Γ 23.2% |
| De Minimis Exemption? | β No |
| Legal Path | USITC:9209.99.10.00 β Section 301:9903.88.01 β IEEPA:9903.01.24 |
π Note:
- If9209.92.20.00is rejected by customs (e.g., if the stand is not "foldable" or not strictly for instruments), this is the fallback.
- The 7.5% Section 301 surcharge makes it significantly more expensive than the preferred code.
π― 3. 7616.99.51.70 β Material-Specific: Aluminum Stand
| Item | Detail |
|---|---|
| Base Duty Rate | 2.5% |
| Section 301 Surcharge | 25.0% |
| IEEPA Surcharge | 10% |
| Total Tax Rate | 37.5% |
| Calculation Basis | CIF Value Γ 37.5% |
| De Minimis Exemption? | β No |
π Warning:
- High Section 301 tariff (25%) because it falls under Chapter 76 (Aluminum).
- Only use if the stand is exclusively aluminum and cannot be argued as an instrument part.
π― 4. 9403.60.80.93 β Furniture Type: Wooden Stand
| Item | Detail |
|---|---|
| Base Duty Rate | 0.0% |
| Section 301 Surcharge | 25.0% |
| IEEPA Surcharge | 10% |
| Total Tax Rate | 35.0% |
| Calculation Basis | CIF Value Γ 35.0% |
π Note:
- Low base duty (0%) but high Section 301 surcharge (25%).
- Suitable only for wooden stands.
π― 5. 9403.20.00.90 β DANGEROUS: Metal Furniture Part
| Item | Detail |
|---|---|
| Base Duty Rate | 0.0% |
| Section 301 Surcharge | 25.0% |
| IEEPA Surcharge | 10% |
| Special Metal Surcharge | 50% (Steel/Aluminum/Copper specific) |
| Total Tax Rate | 85.0% |
| Calculation Basis | CIF Value Γ 85.0% |
| De Minimis Exemption? | β No |
π¨ CRITICAL WARNING:
- This is the worst-case scenario.
- The 50% surcharge for "Steel, Aluminum, Copper Products" under Chapter 94 drives the total tax to 85%.
- Never classify a metal instrument stand as "Metal Furniture" unless you have no other option and are prepared to pay triple the duty.
π οΈ IV. Customs Clearance Practical Advice (Pitfall Avoidance Guide)
β 1. Documentation Checklist (Non-Negotiable)
| Document | Required? | Purpose |
|---|---|---|
| Product Specifications | βοΈ | Must detail: Material, Foldable? (Yes/No), Intended Use (Instrument Support). |
| Product Photos | βοΈ | Clear images of the stand holding a guitar. Proves "Instrument Support" function. |
| Commercial Invoice | βοΈ | Must clearly state: "Foldable Guitar Stand, Part of Musical Instrument Accessories." |
| Bill of Lading/Air Waybill | βοΈ | Ensure HS Code matches the selected code precisely. |
| Material Declaration | βοΈ | Explicitly state if Aluminum, Steel, Wood, or Plastic. |
β 2. Classification Strategy (The "Golden Rule")
π₯ "Prioritize Chapter 92, Avoid Chapter 94 Metal!"
| Scenario | Recommended HS Code | Reason |
|---|---|---|
| Foldable Metal/Plastic Stand | 9209.92.20.00 |
Fits "Foldable Instrument Support." Lowest tax (13.9%). |
| Sheet Music Stand | 9209.99.10.00 |
Fits "Musical Accessory." Moderate tax (23.2%). |
| Solid Wooden Stand | 9403.60.80.93 |
Fits "Wooden Furniture." Moderate tax (35.0%). |
| Aluminum Stand (Non-foldable) | 7616.99.51.70 |
Fits "Aluminum Articles." Higher tax (37.5%). |
| Metal Stand (Any Metal) | AVOID 9403.20.00.90 |
Tax jumps to 85%. Do not use unless absolutely necessary. |
β 3. Common Mistakes & Penalties
| β Mistake | π« Consequence | π‘ Correction |
|---|---|---|
| Declaring as "Furniture Part" | 85% Tax (9403.20.00.90) |
Declare as "Musical Instrument Accessory" (9209). |
| Vague Description: "Stand" | Customs Audit/Delay | Use specific terms: "Foldable Guitar Stand." |
| Ignoring Material | Misclassification | Clearly state material: "Aluminum Alloy Foldable Stand." |
| Assuming De Minimis Applies | Seizure/Back Taxes | De Minimis does NOT apply to China-origin goods with Section 301/IEEPA surcharges. |
π V. Global Market Comparison (2026)
| Region | Recommended HS Code | Est. Duty (China Origin) | Key Certification |
|---|---|---|---|
| πΊπΈ USA | 9209.92.20.00 |
13.9% (Best Case) | None specific, but proof of function needed. |
| πΊπΈ USA | 9403.20.00.90 |
85.0% (Worst Case) | Avoid this classification. |
| π¨π³ China | 9209.92.20.00 |
Low (Import Duty) | Standard CNCA/CCC if electronic (not applicable here). |
| πͺπΊ EU | 9209.92.20.00 |
Low (0-5%) | CE Marking if applicable. |
| π¬π§ UK | 9209.92.20.00 |
Low (0-5%) | UKCA Marking if applicable. |
π Conclusion for US Market:
- The US is the most challenging market due to Section 301 and IEEPA surcharges.
- Correct classification is cost-critical: The difference between9209.92.20.00(13.9%) and9403.20.00.90(85.0%) is 71.1%.
- Action: Always argue for Chapter 92 (Musical Instrument Parts) and provide evidence that the stand is specifically designed for instruments.
π VI. Final Pro Tips for Clearance
- Pre-Ruling Application: If shipping large volumes, apply for a US Customs Ruling Letter to lock in the
9209.92.20.00classification. - Product Marketing: On your website and invoices, use terms like "Musical Instrument Support" and "Foldable Guitar Holder" to reinforce the Chapter 92 argument.
- Avoid "Furniture" Language: Do not use words like "Living Room Furniture" or "Display Rack" in descriptions. Use "Instrument Accessory."
- Material Proof: If aluminum, include material certificates. If wood, include wood type. Customs will inspect material to determine the correct chapter.
π― VII. Summary: Cost Optimization Strategy
| HS Code | Total Tax | Status | Action |
|---|---|---|---|
9209.92.20.00 |
13.9% | β BEST | Use for all foldable stands. |
9209.99.10.00 |
23.2% | β οΈ Acceptable | Use if foldable feature is ambiguous. |
9403.60.80.93 |
35.0% | πΆ Moderate | Use for wooden stands only. |
7616.99.51.70 |
37.5% | πΆ Moderate | Use for non-instrument aluminum stands. |
9403.20.00.90 |
85.0% | β AVOID | Never classify metal stands here. |
π£ Immediate Action Required:
π Confirm HS Code
9209.92.20.00with your freight forwarder.
π Provide "Foldable Instrument Support" documentation.
π Save up to 71% in duties by avoiding Chapter 94 Metal classification!
β¨ Professional Clearance, Precise Classification, Maximum Profit!
πΌ Your Duty Rate is Directly Proportional to Your Declaration Accuracy!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.