measuring cup set of 10
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 6911103550 | 43.5% | CN | US | Official Doc |
| 3924104000 | 13.4% | CN | US | Official Doc |
| 7323999080 | 88.4% | CN | US | Official Doc |
| 6911103510 | 43.5% | CN | US | Official Doc |
Product Images
AI Analysis
π₯£ Measuring Cup Set (10-Piece)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Strategic Clearance for Kitchenware
π I. Product Definition & Classification: Is Your "Set" a Dish or a Tool?
A "10-Piece Measuring Cup Set" is a ubiquitous kitchen tool used for precise ingredient measurement in baking and cooking. In international trade, its classification hinges entirely on Material and Function. It is NOT automatically "Tableware" (dishes for eating) nor is it automatically "Plastics" if it contains metal.
β οΈ Key Distinction Point:
- If the set is made of Plastic β It falls under Chapter 39.
- If the set is made of Porcelain/China β It falls under Chapter 69.
- If the set is made of Stainless Steel/Iron β It falls under Chapter 73.
- Crucial Rule: The classification follows the principal material or the specific subset description provided by USITC.
π¦ II. HS Code Classification Details (Based on Provided Data)
Since the user input is generic ("measuring cup set"), we must analyze the three most common material types found in the provided.
| HS Code | Material Type | Product Description (from Data) | Key Identifier |
|---|---|---|---|
3924.10.40.00 |
Plastics | Tableware, kitchenware... of plastics: Tableware and kitchenware: Other | Generic plastic kitchen tools. Most common for standard sets. |
3924.10.10.00 |
Plastics | Tableware, kitchenware... of plastics: Salt, pepper, mustard and ketchup dispensers... | Specific Use: Only if the set is specifically for dispensing condiments (less common for "measuring"). |
6911.10.35.10 |
Porcelain/China | Tableware... of porcelain or china: Plates... teacups... mugs... Soups, fruits and cereals, not over 22.9 cm | Niche: Ceramic measuring cups often fall here if they resemble small soup/cereal bowls or if explicitly classified as "other" tableware under $56 set rules. |
6911.10.35.50 |
Porcelain/China | Tableware... of porcelain or china: Available in specified sets: In any pattern... value... not over $56 | Premium/Luxury: High-end porcelain measuring sets sold as a coordinated pattern. |
7323.93.00.80 |
Stainless Steel | Table... articles... of iron or steel: Of stainless steel Other | Metal Sets: Stainless steel measuring cups (common in professional kitchens). |
7323.99.90.80 |
Iron/Steel (Non-Stainless) | Table... articles... of iron or steel: Not coated or plated with precious metal: Other | Budget Metal: Lower-grade steel measuring cups (rare in modern consumer markets). |
π Critical Insight:
- Most 10-piece sets are Plastic (3924.10.40.00) or Stainless Steel (7323.93.00.80).
- Ceramic sets are less common for "measuring" but if they are shaped like small bowls/teacups, they may trigger6911.10.35.10.
- Do NOT guess: The material determines the Chapter. Misclassifying Steel as Plastic leads to severe penalties.
π° III. 2026 Latest Tariff Rate Breakdown (Detailed Tax Clauses)
β Applicable Country: USA (US)
β Origin: China (CN) (Based on "Additional U.S. Note 6(b)" context in data)
β Effective Date: Current Trade Policy (Section 301 / IEEPA implications)
π― 1. Plastic Measuring Sets
A. General Plastic Kitchenware (3924.10.40.00)
| Item | Detail |
|---|---|
| Base Duty | 3.4% |
| Additional Duty | 0.0% |
| Total Duty | 3.4% |
| Tax Detail | Base: 3.4%, Added: 0.0% |
| Note | This is the most favorable rate for plastic sets. No heavy Section 301 or IEEPA surcharge listed in the provided data for this specific code. |
B. Condiment Dispensers (3924.10.10.00)
| Item | Detail |
|---|---|
| Base Duty | 3.4% |
| Additional Duty | 0.0% |
| Total Duty | 3.4% |
| Note | Only applies if the "measuring cups" are technically dispensers. Unlikely for standard measuring sets. |
π― 2. Porcelain/China Measuring Sets
A. Standard Pattern/Value < $56 (6911.10.35.50)
| Item | Detail |
|---|---|
| Base Duty | 0.0% |
| Additional Duty | 0.0% |
| Total Duty | 0.0% |
| Condition | Must be sold in a set where the aggregate value of articles listed in Additional U.S. Note 6(b) is not over $56. |
| Note | Zero Duty! This is an excellent clearance code if you can prove the set meets the value/material criteria. |
B. Specific Dimensions (Plates < 27.9cm, Cups/Saucers, Soups/Cereals < 22.9cm) (6911.10.35.10)
| Item | Detail |
|---|---|
| Base Duty | 26.0% |
| Additional Duty | 7.5% |
| Total Duty | 33.5% |
| Tax Detail | Base: 26.0%, Added: 7.5% |
| Note | Applies if the ceramic cups are classified as "tableware" (like soup bowls or teacups) rather than a "set" under the lower value threshold. High tariff. |
π― 3. Stainless Steel Measuring Sets
A. Stainless Steel Other (7323.93.00.80)
| Item | Detail |
|---|---|
| Base Duty | 2.0% |
| Additional Duty | 0.0% |
| Steel/Aluminum/Copper Surcharge | 50% |
| Total Duty | 52.0% |
| Tax Detail | Base: 2.0%, Added: 0.0%, Steel Surcharge: 50% |
| Note | High Cost! The "Steel, Aluminum, Copper Products Additional Duty: 50%" drastically increases the cost. |
π― 4. Non-Stainless Iron/Steel Sets
A. Other Iron/Steel (7323.99.90.80)
| Item | Detail |
|---|---|
| Base Duty | 3.4% |
| Additional Duty | 25.0% |
| Steel/Aluminum/Copper Surcharge | 50% |
| Total Duty | 78.4% |
| Tax Detail | Base: 3.4%, Added: 25.0%, Steel Surcharge: 50% |
| Note | Extremely High Cost. Avoid this classification if possible. Most modern "steel" measuring cups are Stainless Steel, so check for the 50% surcharge applicability. |
π οΈ IV. Customs Clearance Practical Advice (Avoid Pitfalls)
β 1. Documentation Checklist (Must-Haves)
| Document | Requirement | Purpose |
|---|---|---|
| β Product Photos | βοΈ Clearly show material (Plastic vs. Metal vs. Ceramic). | Prove HS Code classification. |
| β Bill of Materials (BOM) | βοΈ List all 10 pieces and their materials. | Verify if it's a "Set" (<$56 rule for Porcelain) or mixed materials. |
| β Commercial Invoice | βοΈ Explicitly state "Measuring Cup Set" and Material. | Avoid ambiguous terms like "Kitchen Utensils." |
| β Set Value Declaration | βοΈ For Porcelain: Declare aggregate value < $56 if claiming 0% tax. | Essential for 6911.10.35.50. |
| β Stainless Steel Proof | βοΈ If claiming 7323.93.00.80, confirm it is Stainless. |
Avoids misclassification as general iron/steel (7323.99...). |
β 2. Declaration Strategy (Key Tips)
π₯ "Material is King, Set Value is Queen!"
| Scenario | Correct HS Code | Why? |
|---|---|---|
| Plastic Set | 3924.10.40.00 |
Lowest risk, stable tax (3.4%). |
| Ceramic Set (Value < $56) | 6911.10.35.50 |
Best Tax (0%) if you can prove the set value condition. |
| Ceramic Set (Individual Items > Threshold) | 6911.10.35.10 |
High Tax (33.5%) if not qualifying as a low-value set. |
| Stainless Steel Set | 7323.93.00.80 |
High Tax (52%) due to Steel Surcharge. |
| Mixed Material Set | Complex | Usually classified by principal material or component. If 90% plastic, likely Plastic. If mixed, may be denied or split. |
π Warning for Steel Sets:
The 50% Steel Surcharge applies to7323.93.00.80. This is a "Steel, Aluminum, Copper Products Additional Duty." It is non-negotiable for Chinese-origin steel goods. Ensure your supplier confirms the surcharge responsibility.
β 3. Special Handling for "Set" Classification
- Porcelain: The code
6911.10.35.50requires the set to be "Available in specified sets" and the aggregate value of certain articles (Note 6(b)) must be under $56. If your luxury ceramic set is $60, you cannot use the 0% rate. You must use6911.10.35.10(33.5%) or check other subheadings. - Plastic/Steel: No value threshold for "sets" in the provided data. They are classified by material and specific description.
π V. Global Market Comparison (2026 Outlook)
| Market | Recommended HS Code | Est. Duty (China Origin) | Key Requirement |
|---|---|---|---|
| πΊπΈ USA | 3924.10.40.00 (Plastic) |
3.4% | Standard clearance. |
| πΊπΈ USA | 7323.93.00.80 (Steel) |
52.0% | High surcharge. |
| πΊπΈ USA | 6911.10.35.50 (Ceramic) |
0.0% | Must prove Set Value <$56. |
| πͺπΊ EU | Varies (often 90.23 or 39.24) | 0% - 6.5% | CE Marking for plastics. |
| π¨π³ China | 3924.10 / 7323.93 | 0% - 5% | CCC if applicable. |
π Conclusion:
- USA is the most complex market due to the Steel Surcharge and specific Porcelain set rules.
- Plastic is the safest and cheapest route (3.4%).
- Ceramic can be tax-free but requires strict value documentation.
π VI. Common Mistakes & Pitfalls (Lessons Learned)
β Mistake 1: Declaring Stainless Steel Measuring Cups as "Plastic"
π Consequence: Customs audit, fines, and retroactive duty payment (52% + penalties).
β Mistake 2: Claiming 0% Duty on Ceramic Sets > $56
π Consequence: Underpayment of duty (33.5% - 0% = 33.5% difference). Customs will assess back taxes + interest.
β Mistake 3: Ignoring the "Steel Surcharge" for Metal Sets
π Consequence: Budget blowout. Expecting 2-5% duty, but paying 52%.
β Mistake 4: Using "Kitchen Tools" as a generic description
π Consequence: Customs may classify under the highest duty rate or request extensive clarification, causing delays.
β Correct Approach:
"Measuring Cup Set, 10-Piece, Plastic, BPA-Free, Includes Cups 1/4oz to 1 Cup."
OR
"Measuring Cup Set, Ceramic, 10-Piece, Value $45.00, Patterned."
π― VII. Conclusion: Smart Classification Saves Money
π― Remember the Golden Rules:
πΉ Plastic? β
3924.10.40.00β 3.4% (Safe & Low)
πΉ Ceramic < $56? β6911.10.35.50β 0% (Best Tax, Harder Compliance)
πΉ Ceramic > $56? β6911.10.35.10β 33.5% (High Tax)
πΉ Steel? β7323.93.00.80β 52.0% (Expensive, Surcharge Applies)
π Pro Tip:
If you are importing Stainless Steel sets, consider if Plastic sets are a viable alternative for cost savings (3.4% vs 52%). If you must import Steel, budget for the 50% Additional Duty.
π£ Immediate Action:
π Consult your customs broker with Material Spec and Set Value.
π Prepare invoices showing Itemized Material for the 10 pieces.
π Clearance Strategy: Choose Plastic for low cost, or Ceramic for tax exemption (if value allows).
β¨ Precision in Classification, Profit in Margin!
πΌ Don't let a 50% surcharge eat your profits!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.