multi screw extruder
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 8477200015 | 13.1% | CN | US | Official Doc |
| 8477200055 | 13.1% | CN | US | Official Doc |
Product Images
AI Analysis
🏭 Multi-Screw Extruders (Machinery for Rubber/Plastics)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Strategy for Thermosetting & Thermoplastic Extruders
📌 I. Product Definition & Classification: Do You Know Your "Extruder" Type?
Multi-screw extruders are high-performance industrial machinery used for mixing, plasticizing, and extruding materials. In international trade, they are strictly categorized by the material they process and their mechanical structure. Misclassification can lead to significant delays or incorrect duty assessments.
There are two primary categories based on the DATA provided:
Thermosetting Material Extruders: Designed for processing rubber or thermosetting plastics (which cure/set permanently). These often feature complex screw designs for intense mixing. Thermoplastic Material Extruders: Designed for processing thermoplastics (which melt and solidify repeatedly). Classification here often depends on screw size, a critical technical parameter.
⚠️ Key Distinction Point:
- If the machine is for rubber/thermosetting materials → Look for 8477.20.00.15.
- If the machine is for thermoplastics → Look for 8477.20.00.55.
- Screw Size Matters: For thermoplastics, if the screw diameter is less than 6.4 cm, it falls under the specific subheading for "smaller screw sizes."
📦 II. HS Code Classification Details (2026 Latest Tariff Authority对照)
| HS Code | Product Description | Application Scenario | Key Technical Feature |
|---|---|---|---|
8477.20.00.15 |
Extruders for rubber/thermosetting materials: Other, including multi-screw | Rubber processing, thermosetting resin molding | 🧪 Process: Thermosetting (Curing) |
8477.20.00.55 |
Extruders for thermoplastics: Other, including multi-screw: With screw size < 6.4 cm | Small-scale plastic extrusion, precision polymer processing | 📏 Size: Screw Diameter < 6.4 cm |
🔍 Critical Reminder:
- 8477.20.00.15 applies to Rubber/Thermosetting extruders. The "multi-screw" feature is included in "Other."
- 8477.20.00.55 applies to Thermoplastic extruders with a specific constraint: The screw size must be less than 6.4 cm. If the screw is larger, it might fall under a different general "Other" category (not listed in the provided data, but worth noting for accuracy).
- Do not mix these: A machine cannot be classified as both. The material type is the primary divider.
💰 III. 2026 Latest Tariff Rate Explanation (Detailed Breakdown)
✅ Applicable Country: United States (US)
✅ Origin: China (CN) (Note: Rates shown in DATA are Base + Additional. If origin is different, please check FTAs)
✅ Effective Time: Current applicable rates as per the provided data.
🎯 1. 8477.20.00.15 —— Extruder for Rubber/Thermosetting Materials (Multi-Screw)
| Item | Content |
|---|---|
| Base Tariff Rate | 3.1% (ad valorem) |
| Additional Tariff (Section 301 etc.) | 0.0% |
| Total Effective Tax Rate | 3.1% |
| Tax Calculation | CIF Value × 3.1% |
| De Minimis Exemption | ❌ Not Applicable (High value industrial machinery) |
| Legal Basis Path | HTSUS:8477.20.00.15 |
📌 Explanation:
- The base tariff for this specific rubber/thermosetting extruder is 3.1%.
- According to the provided data, there are NO additional tariffs (e.g., Section 301 or IEEPA surcharges) applied to this specific HS code in this dataset.
- This makes it a cost-effective import compared to many other industrial machinery categories.
🎯 2. 8477.20.00.55 —— Extruder for Thermoplastics (Screw Size < 6.4 cm)
| Item | Content |
|---|---|
| Base Tariff Rate | 3.1% (ad valorem) |
| Additional Tariff (Section 301 etc.) | 0.0% |
| Total Effective Tax Rate | 3.1% |
| Tax Calculation | CIF Value × 3.1% |
| De Minimis Exemption | ❌ Not Applicable |
| Legal Basis Path | HTSUS:8477.20.00.55 |
📌 Explanation:
- Despite being for thermoplastics (which often have higher duties for other sizes), this specific smaller screw size (<6.4 cm) enjoys a low base rate of 3.1%.
- No additional tariffs are listed in the provided data.
- Caution: Ensure your technical documentation explicitly states the screw diameter is < 6.4 cm. If it is ≥ 6.4 cm, this code is invalid, and you may be misclassified, leading to penalties.
🛠️ IV. Customs Clearance Practical Advice (Avoid Pitfalls)
✅ 1. Required Documentation Checklist
| Document | Mandatory? | Description |
|---|---|---|
| ✅ Technical Specification Sheet | ✔️ | Must clearly state: Material Type (Rubber vs. Thermoplastic) and Screw Diameter (for thermoplastic models). |
| ✅ Product Photographs | ✔️ | Show the extruder body, screw assembly (if visible), and control panel. Label should include model number. |
| ✅ Commercial Invoice | ✔️ | Clearly describe as "Multi-Screw Extruder for [Rubber/Plastic]." Do not use generic terms like "Plastic Machine." |
| ✅ Packing List | ✔️ | Detail dimensions and weight to match the declared HS Code. |
| ✅ Certificate of Origin | ✔️ | To prove origin for potential FTA benefits (if applicable outside this dataset). |
✅ 2. Declaration Tips (Key Mantra)
🔥 "Material First, Size Second, Screw Clear, Duty Low!"
| Scenario | Correct Declaration | Incorrect Practice |
|---|---|---|
| Extruder for Rubber | 8477.20.00.15 |
Misclassifying as Thermoplastic code → Potential reclassification |
| Extruder for Plastic, Screw < 6.4 cm | 8477.20.00.55 |
Classifying as larger screw code → Higher duty risk |
| Extruder for Plastic, Screw ≥ 6.4 cm | Not in Data (Check other codes) | Using 8477.20.00.55 → Illegal Misclassification |
| Machine for Wood/Metal | Wrong Chapter (8445/8464) | Using 8477 code → Severe Penalty |
✅ 3. Special Handling
| Case | Handling Advice |
|---|---|
| Dual-Use Machines | If a machine can process both rubber and thermoplastics, declare based on the primary intended use or the most common configuration. Provide engineering proof. |
| New vs. Used | Used machinery may require additional inspection for safety/standards. Ensure all certifications are valid. |
| Screw Size Verification | For 8477.20.00.55, provide a technical drawing highlighting the screw diameter. Customs may request this to verify the "< 6.4 cm" claim. |
🌍 V. Global Market Comparison (2026 Snapshot)
| Country/Region | Recommended HS Code | Base Tariff | Notes |
|---|---|---|---|
| 🇺🇸 USA | 8477.20.00.15 / .55 |
3.1% | No additional tariffs in this dataset. Low entry cost. |
| 🇪🇺 EU | 8477.20 |
~3-4% | Varies by member state. CE Marking required. |
| 🇨🇳 China | 8477.20 |
~3-5% | Import duties vary. Look for domestic substitution policies. |
📌 Conclusion:
- The US market offers a very favorable 3.1% rate for these specific multi-screw extruders under the provided data.
- Accuracy is key: Misclassifying the material type or screw size can lead to incorrect duty payments and potential audits.
📌 VI. Common Errors & Pitfalls (Lessons Learned)
❌ Error 1: Ignoring the Screw Size for Thermoplastics
👉 Consequence: Using 8477.20.00.55 for a large screw extruder → Customs Rejection or reclassification to a higher duty code.
❌ Error 2: Confusing Thermosetting and Thermoplastic
👉 Consequence: Wrong HS Code selection. While both are 3.1% in this dataset, they are different legal codes. Incorrect description can lead to seizure or delay.
❌ Error 3: Vague Product Names
👉 Consequence: "Plastic Extruder" is too vague. Must specify "Multi-Screw Extruder for Thermoplastics with Screw Size < 6.4 cm."
✅ Correct Declaration Example:
"Multi-Screw Extruder, Model XYZ, for processing Thermoplastics, Screw Diameter: 6.0 cm, 380V, 50Hz, New Condition."
🎯 VII. Conclusion: Precision in Classification, Efficiency in Clearance
🎯 Remember the Key:
🔹 "Rubber = .15, Plastic <6.4cm = .55"
🔹 "3.1% Total Tax, No Surcharge, But Verify Size!"
📌 Pro Tip:
If your extruder has a screw size greater than 6.4 cm but is for thermoplastics, it is NOT covered by 8477.20.00.55. You must find the correct "Other" subheading for larger screws, which may have different rates. Do not force-fit the <6.4cm code.
📣 Action Plan:
📞 Verify Screw Diameter: Measure precisely in centimeters.
🔍 Confirm Material Type: Is it Rubber/Thermosetting or Thermoplastic?
📄 Prepare Technical Docs: Include diagrams showing screw size.
🚀 Clear Customs Fast: Accurate classification ensures smooth entry at the low 3.1% rate!
✨ Professional Classification Saves Money!
💼 Your Machinery, Your Competitive Edge, Starts with the Right HS Code!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.