nail machine
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 8510300000 | 14.2% | CN | US | Official Doc |
| 8510905500 | 39.2% | CN | US | Official Doc |
| 8214203000 | 14.0% | CN | US | Official Doc |
| 8214209000 | 14.1% | CN | US | Official Doc |
| 8479899599 | 87.5% | CN | US | Official Doc |
| 8479896500 | 20.3% | CN | US | Official Doc |
Product Images
AI Analysis
✨⚡ Electric Nail Clippers (The "Nail Machine")
🌐 HS Code Reference & Clearance Guide | 2025-2026 Duty Rate Breakdown | Professional Strategy for Beauty Tools
📌 Part 1: Product Definition & Classification Logic: Do You Know What a "Nail Machine" Is?
The "Nail Machine" (Electric Nail Clipper) is a specialized beauty and grooming tool used for trimming, shaping, and polishing nails. In international trade, its classification hinges on two critical factors:
1. Function: Is it purely a manual tool (blade-based) or does it contain a self-contained motor?
2. Category: Does it fall under Beauty/Depilation (electric shavers/trimmers) or Hand Tools (cutting instruments)?
⚠️ Key Classification Distinction:
- With Built-in Motor: Falls under Chapter 85 (Electrical Machinery) → Higher risk of heavy "Section 301" duties.
- Without Motor (Manual): Falls under Chapter 82 (Base Metal Tools) → Lower base duty, but still subject to Section 122.
- Parts/Accessories: Must be declared separately if sold individually.
📦 Part 2: HS Code Classification Matrix (2025-2026 Latest Tariff Schedule)
Based on your specific product profile, here are the 6 potential HS Codes with their corresponding tax logic.
| HS Code | Product Description & Logic | Why This Classification? | Total Duty Rate |
|---|---|---|---|
| 8510.30.00.00 | Electric Nail Clippers (Beauty/Depilation) | Classified as an extension of electric shavers/trimmers (脱毛器/毛发修剪器). Contains a self-contained motor. | 14.2% |
| 8510.90.55.00 | Parts/Components of Electric Trimmers | Inferred as parts of beauty/trimming devices. Applies if sold as accessories (blades, motor parts). | 39.2% |
| 8214.20.30.00 | Electric Manicure Tools (Blade Category) | Classified under base metal cutters (cutting knives). Focuses on the "blade" aspect, even if electric. | 14.0% |
| 8214.20.90.00 | Manicure/Pedicure Sets | Fits the definition of manicure tools within sets. No material conflict; general purpose tool. | 14.1% |
| 8479.89.95.99 | Other Machines/Equipment (Fallback) | Fallback classification for independent machinery. High risk of "Steel/Aluminum/Copper" surcharges. | 87.5% |
| 8479.89.65.00 | Independent Machinery with Motor | Broad "Other Machinery" with self-contained motor. Reasonable inference if specific beauty code fails. | 20.3% |
💰 Part 3: Detailed Duty Rate Breakdown (The "Cost of Compliance")
✅ Applicable Market: United States (US)
✅ Origin: China (CN)
✅ Effective Date: Current 2025-2026 Trade War Measures (Section 301 & Section 122)
🎯 1. The "Safe" Beauty Route: 8510.30.00.00
Best for: Standard Electric Nail Clippers with a built-in motor.
| Item | Detail |
|---|---|
| Base Duty | 4.2% |
| Add-on Duty (Section 301) | 0.0% (Specific to this sub-heading) |
| Section 122 Duty | 10% (Mandatory for US market imports from China) |
| Total Duty | 14.2% |
| Logic | Treated as a shaver/trimmer (Beauty Tool), exempt from the heavy 25% Section 301 tariff applied to other electrical goods. |
🎯 2. The "High Risk" Machine Route: 8479.89.95.99
Worst for: If declared as "General Machinery" instead of Beauty Tool.
| Item | Detail |
|---|---|
| Base Duty | 2.5% |
| Add-on Duty (Section 301) | 25.0% |
| Section 122 Duty | 10% |
| Steel/Aluminum/Copper Surcharge | +50% (If components contain these metals) |
| Total Duty | 87.5% |
| Logic | Danger Zone! This code triggers all penalties. The 50% surcharge applies if the motor or blade contains steel/aluminum/copper. Avoid this code unless absolutely necessary. |
🎯 3. The "Parts" Trap: 8510.90.55.00
Risk for: Selling replacement blades or motor units separately.
| Item | Detail |
|---|---|
| Base Duty | 4.2% |
| Add-on Duty (Section 301) | 25.0% |
| Section 122 Duty | 10% |
| Total Duty | 39.2% |
| Logic | Classified as parts of electric shavers. Parts are not exempt from the 25% Section 301 tariff, making them expensive to import as separate SKUs. |
🎯 4. The "Manual Tool" Route: 8214.20.30.00 & 8214.20.90.00
Good for: If the "electric" feature is deemed secondary or if declared as a cutting tool.
| Item | Detail |
|---|---|
| Base Duty | 4.0% - 4.1% |
| Add-on Duty (Section 301) | 0.0% |
| Section 122 Duty | 10% |
| Total Duty | 14.0% - 14.1% |
| Logic | Treated as cutting instruments (Knives). No Section 301 penalty, but requires careful documentation to prove it's a "tool" and not just an appliance. |
🎯 5. The "Middle Ground" Route: 8479.89.65.00
Alternative for: Complex motorized units.
| Item | Detail |
|---|---|
| Base Duty | 2.8% |
| Add-on Duty (Section 301) | 7.5% (Partial penalty) |
| Section 122 Duty | 10% |
| Total Duty | 20.3% |
| Logic | A "catch-all" machine code. Lower than the 87.5% trap, but higher than the beauty tool codes. Use only if the product doesn't fit 8510. |
🛠️ Part 4: Clearance Practical Advice (Avoiding the 87.5% Trap)
✅ 1. The Golden Rule of Declaration
🚫 DO NOT declare Electric Nail Clippers as "General Machinery" (
8479...) unless you have no choice. ✅ DO declare them as Beauty Tools / Electric Shavers (8510...or8214...). Why? The difference is 14.2% vs. 87.5%. That is a 73% cost increase!
✅ 2. Essential Documentation Checklist
To prove your product belongs to 8510.30.00.00 (The 14.2% rate):
| Document | Requirement |
|---|---|
| Product Description | Must explicitly state: "Electric Nail Clipper," "Beauty Tool," "Self-contained Motor." Avoid vague terms like "Grooming Machine." |
| Function Analysis | Prove the primary function is grooming/beauty, not general mechanical processing. |
| Motor Specification | Confirm the motor is self-contained (built-in) and low-voltage (battery operated). |
| User Manual | Must show usage for personal beauty/nail care, not industrial or commercial use. |
| Photos | Clear images showing the device is a handheld beauty tool, not an industrial machine. |
✅ 3. Strategic Pricing & Margin Impact
| HS Code | Total Duty | Margin Impact (Est.) | Recommendation |
|---|---|---|---|
8510.30.00.00 |
14.2% | ✅ Low | STRONGLY RECOMMENDED |
8214.20.30.00 |
14.0% | ✅ Low | Recommended |
8479.89.65.00 |
20.3% | ⚠️ Medium | Acceptable if 8510 is rejected |
8510.90.55.00 |
39.2% | ❌ High | Avoid for finished goods |
8479.89.95.99 |
87.5% | 🚫 Catastrophic | NEVER USE unless misclassified |
🌍 Part 5: Quick Comparison & Conclusion
🔥 The Critical Takeaway:
The "Nail Machine" is a Beauty Tool, not a General Machine.
- Best Rate:
8510.30.00.00(14.2%) → The "Electric Shaver" path.- Second Best:
8214.20.30.00(14.0%) → The "Cutting Tool" path.- The Danger:
8479.89.95.99(87.5%) → The "Steel/Aluminum Surcharge" trap.💡 Pro Tip for Customs Brokers:
"When declaring an electric nail clipper, always reference Chapter 85 (Electrical Machinery) under the 'Electric Shaver/Trimmer' category. Never default to 'Other Machinery' (8479) without a compelling technical reason, as the 50% steel/aluminum surcharge will destroy your profit margin."
✨ Professional Clearance starts with the correct HS Code!
💼 Don't let a 0.0% difference in classification cost you 50% in duties!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.