needle felt tool
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 8205595510 | 40.3% | CN | US | Official Doc |
| 8205595560 | 40.3% | CN | US | Official Doc |
AI Analysis
𧡠Needle Felt Tool (Needle Punching Tools & Felting Needles)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
π 1. Product Definition & Classification: Do You Really Understand "Needle Felt Tools"?
Needle Felt Tools primarily refer to handheld implements used for punching fibers into felt, creating 3D shapes, or decorating fabrics. In international trade, these are classified under Chapter 82: Tools, Implements, Cutlery, Spoons and Forks of Base Metal; Parts Thereof.
Specifically, they fall under the category of "Other hand tools (including glass cutters) not elsewhere specified or included."
β οΈ Key Distinction:
- If the product is a handheld tool (like a felting needle punch tool, multi-needle holders, or single felting needles used manually) β It is classified as a Hand Tool.
- If it is a machine part or an industrial component for automatic machinery β It might be classified differently (e.g., parts of machinery), but the provided DATA specifically covers Handtools.
π¦ 2. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
Based on the provided <DATA>, here are the specific HS codes for Needle Felt Tools:
| HS Code | Product Description | Applicable Scenario | Material |
|---|---|---|---|
8205.59.55.10 |
Other edged handtools: Other: Of iron or steel | Felting needles, single-point punching tools, small handheld punching implements | Iron/Steel |
8205.59.55.60 |
Other handtools (including parts): Other (including parts) | Felting needle holders, multi-needle punches, handles for felting tools, replacement needle parts | Iron/Steel |
π Important Note:
- Both codes apply to items made of Iron or Steel.
-8205.59.55.10is typically for the edged/cutting/punching element itself (the needle).
-8205.59.55.60is often used for assemblies, holders, or parts that are considered "other handtools" or components thereof.
π° 3. 2026 Latest Tariff Rate Details (Including Surtaxes & Policy Surcharges)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Date: From November 10, 2025 (and subsequent imports)
π― 1. 8205.59.55.10 β Other Edged Handtools (Of Iron or Steel)
| Item | Content |
|---|---|
| Base Tariff Rate | 0.0% |
| Surtax (Section 301 / IEEPA) | 0.0% |
| Total Tax Rate | 0.0% |
| Tax Calculation | CIF Value Γ 0.0% = $0 |
| De Minimis Eligibility | β Yes (If value β€ $800 per shipment) |
| Legal Basis Path | 8205.59.55.10 β Base: 0% + Surtax: 0% |
π Explanation:
- Unlike many electronic or heavy industrial goods, small hand tools like needle felting tools are currently exempt from additional U.S. tariffs (such as Section 301 or IEEPA surtaxes).
- This makes them a high-margin, low-risk item for import into the U.S.
π― 2. 8205.59.55.60 β Other Handtools (Including Parts) (Of Iron or Steel)
| Item | Content |
|---|---|
| Base Tariff Rate | 0.0% |
| Surtax (Section 301 / IEEPA) | 0.0% |
| Total Tax Rate | 0.0% |
| Tax Calculation | CIF Value Γ 0.0% = $0 |
| De Minimis Eligibility | β Yes (If value β€ $800 per shipment) |
| Legal Basis Path | 8205.59.55.60 β Base: 0% + Surtax: 0% |
π Note:
- This code covers holders, frames, or accessory parts for needle felting.
- The tax treatment is identical to the needles themselves: Zero Duty.
π οΈ 4. Customs Clearance Practical Advice (Real-World Pitfall Guide)
β 1. Required Documentation Checklist (Nothing Missing)
| Document | Must Provide | Explanation |
|---|---|---|
| β Product Specification Sheet | βοΈ | Detail: Needle type (e.g., barbed, smooth), length, gauge, material (steel). |
| β Product Photos | βοΈ | Clear images of the tool, including any handles or holders. |
| β Commercial Invoice | βοΈ | Must clearly state "Needle Felting Tools" or "Hand Tools of Base Metal." Avoid vague terms like "Craft Supplies." |
| β Packing List | βοΈ | List quantity, weight, and dimensions. Separate items if mixing needles with holders. |
| β Material Declaration | βοΈ | Confirm material is Iron or Steel (not stainless steel if different duty applies, though often similar). |
β 2. Declaration Tips (Key Mantra)
π₯ "Be Specific, Not Vague! 'Craft Tool' vs. 'Hand Tool' Matters!"
| Situation | Correct Declaration | Incorrect Declaration |
|---|---|---|
| Single Felting Needles | HS 8205.59.55.10 β "Edged Handtools of Iron/Steel" | "Needles for Sewing" (Misclassification) |
| Multi-Needle Punch Holder | HS 8205.59.55.60 β "Handtools, Other" | "Plastic Handle" (Missing the metal tool aspect) |
| Complete Kit (Needles + Holder + Felt) | Split Declaration: Tool at 0%, Felt at its own code | "Arts and Crafts Kit" (Ambiguous, may trigger higher scrutiny) |
β 3. Special Circumstances Handling
| Situation | Handling Advice |
|---|---|
| Stainless Steel Needles | Check if stainless steel falls under a different sub-heading. If not specified in DATA, assume same 0% unless noted otherwise. |
| Automated Felting Machines | NOT covered by this DATA. These are machinery (Chapter 84). Misdeclaring machine parts as hand tools is a serious violation. |
| De Minimis Shipping (Amazon FBA/UPS/Mail) | Since tax is 0%, these items qualify for Section 321 (De Minimis) exemption under $800. No duty paperwork needed for small parcels. |
π 5. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff Rate | Certification Required | Notes |
|---|---|---|---|---|
| πΊπΈ USA | 8205.59.55.10 / .60 |
0.0% | None (for general use) | Zero Duty Advantage |
| π¨π³ China (Export) | 8205.59.55 |
Varies (VAT Refund) | N/A | Standard export procedure |
| πͺπΊ EU | 8205.59 |
~3.5% - 6.5% | CE (if applicable) | Lower volume, higher per-unit cost |
| π¬π§ UK | 8205.59 |
~3.5% - 6.5% | UKCA | Post-Brexit rules apply |
| π¦πΊ Australia | 8205.59 |
5.0% | N/A | Low tariff, easy clearance |
π Conclusion:
- USA is the best market for needle felt tools due to 0% tariff.
- EU and Australia have moderate tariffs, so price competitiveness must be maintained.
π 6. Common Mistakes & Pitfall Guide (Lessons Learned)
β Mistake 1: Declaring as "Sewing Needles" (HS 9602)
π Consequence: Sewing needles are for textiles; felting needles are for felt/crafting. Misclassification can lead to audit delays or back-taxes.
β
Fix: Always specify "Needle Felting Tools" or "Hand Punching Tools."
β Mistake 2: Ignoring the "Base Metal" Requirement
π Consequence: If the tool is primarily plastic with a small steel tip, customs might argue it's not a "handtool of base metal."
β
Fix: Ensure the functional part is metal and declared as such.
β Mistake 3: Combining Tools with Raw Materials in One Line Item
π Consequence: Confuses customs brokers and may trigger unnecessary inspections.
β
Fix: Separate line items for:
- Line 1: Felting Needles (HS 8205.59.55.10)
- Line 2: Felting Needles Holders (HS 8205.59.55.60)
- Line 3: Wool Roving (HS 5101/5107)
π― 7. Conclusion: Professional Declaration, Save Time, Maximize Profit!
π― Remember the Mantra:
πΉ "Needles = 0% Duty! Holders = 0% Duty! No Surtax!"
πΉ "Declare as Handtools, Not Sewing Needles! Avoid the Audit Trap!"
π Pro Tip:
If you are shipping via e-commerce platforms (like Amazon, Etsy) to the US, leverage the $800 De Minimis rule. Since the duty is 0%, your clearance is smooth and fast, especially for small batches.
π£ Take Action Now:
π Confirm with your freight forwarder that they recognize
8205.59.55as a non-surcharge item.
π¦ Prepare clear product photos showing the metal tips.
π Ship with confidence β Needle Felt Tools are a tariff-free win!
β¨ Professional Customs Clearance Starts with Precise Classification!
πΌ Your Profit Margin is Protected by 0% Tariffs!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.