pants hanger
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 7326200020 | 88.9% | CN | US | Official Doc |
| 4421999880 | 38.3% | CN | US | Official Doc |
| 7326908688 | 87.9% | CN | US | Official Doc |
| 3926305000 | 22.8% | CN | US | Official Doc |
| 4421100000 | 13.2% | CN | US | Official Doc |
| 3926301000 | 24.0% | CN | US | Official Doc |
Product Images
AI Analysis
π Pants Hangers: The Ultimate HS Code & Tariff Deep Dive (US Market 2024-2026)
π HS Code Classification & Customs Clearance Guide | Professional Compliance Strategy
π I. Product Definition: What Exactly Is a "Pants Hanger"?
In international trade, "Pants Hangers" (Trouser Hangers) are classified differently based on their material composition and structural design. They are generally considered accessories for household or industrial storage. Misclassification is the #1 cause of customs delays and unexpected tariff spikes, especially for US imports from China.
β οΈ Key Distinction:
- Wooden Hangers: Fall under Chapter 44 (Wood).
- Plastic Hangers: Fall under Chapter 39 (Plastics).
- Metal Hangers (Steel/Iron): Fall under Chapter 73 (Iron/Steel).
- Generic/Other: May fall under residual headings (4421.99 or 7326.90).
π¦ II. HS Code Classification Matrix (Official Data Reference)
Below are the 5 specific HS Codes identified for Pants Hangers, based on the provided data. Each classification triggers a different tax liability due to varying base rates and Section 301/Section 232 additional duties.
| HS Code | Material | Summary Description | Total Tax Rate | Key Tax Components |
|---|---|---|---|---|
| 4421.10.00.00 | πͺ΅ Wood | Wooden pants hangers (Clothes hangers) | 13.2% | Base: 3.2% + Section 301: 0% + Sec 122: 10% |
| 3926.30.10.00 | 𧱠Plastic | Plastic pants hangers (Other plastic articles) | 24.0% | Base: 6.5% + Section 301: 7.5% + Sec 122: 10% |
| 7326.20.00.20 | π© Iron/Wire | Iron or wire pants hangers | 88.9% | Base: 3.9% + Sec 301: 25% + Sec 122: 10% + Steel/Alu/Cu Add: 50% |
| 4421.99.98.80 | πͺ΅ Wood (Other) | Other wooden pants hangers (Unclassified wood items) | 38.3% | Base: 3.3% + Sec 301: 25% + Sec 122: 10% |
| 7326.90.86.88 | π© Steel/Iron | Other iron or steel articles (Pants hangers) | 87.9% | Base: 2.9% + Sec 301: 25% + Sec 122: 10% + Steel/Alu/Cu Add: 50% |
π Critical Insight:
- Metal hangers are extremely expensive to import into the US due to the "Steel, Aluminum, Copper Additional Duty: 50%" clause.
- Wooden hangers offer the lowest tax burden (13.2% or 38.3%).
- Plastic hangers sit in the middle (24.0%).
π° III. Detailed Tariff Breakdown & Legal Basis
β Applicable Country: USA (US)
β Origin: China (CN) (Assumed based on typical Section 301/122 context)
β Effective Date: Current (2024-2026 Framework)
π― 1. πͺ΅ Wooden Pants Hangers: 4421.10.00.00 (Best Option)
Classification: Clothes Hangers of Wood.
| Tax Component | Rate | Explanation |
|---|---|---|
| Base Duty | 3.2% | Standard MFN (Most Favored Nation) rate for wood articles. |
| Section 301 (Add'l) | 0.0% | NO additional 25% tariff applies to this specific subheading. |
| Section 122 | 10.0% | Additional duty under Section 122 (often applies to certain consumer goods). |
| TOTAL EFFECTIVE RATE | 13.2% | Lowest possible rate among all materials. |
π Why it wins:
The combination of low base duty and zero Section 301 penalty makes wooden hangers the most cost-effective choice for US importers.
π― 2. 𧱠Plastic Pants Hangers: 3926.30.10.00
Classification: Other articles of plastic (Hangers).
| Tax Component | Rate | Explanation |
|---|---|---|
| Base Duty | 6.5% | Standard rate for plastic articles. |
| Section 301 (Add'l) | 7.5% | Partial Section 301 duty (not the full 25%). |
| Section 122 | 10.0% | Additional duty under Section 122. |
| TOTAL EFFECTIVE RATE | 24.0% | Moderate cost. |
π Note:
Plastic is subject to a 7.5% Section 301 duty, which is significantly lower than the 25% applied to metal. This makes plastic a viable alternative if wood is unavailable.
π― 3. π© Metal Pants Hangers: 7326.20.00.20 & 7326.90.86.88 (High Risk!)
Classification: Articles of iron/steel (Hangers).
| Tax Component | Rate | Explanation |
|---|---|---|
| Base Duty | 3.9% (for 7326.20) or 2.9% (for 7326.90) | Standard steel article duty. |
| Section 301 (Add'l) | 25.0% | Full Section 301 tariff applies to steel articles. |
| Section 122 | 10.0% | Additional duty. |
| Steel/Alu/Cu Add'l | 50.0% | CRITICAL: Additional duty on steel/aluminum products. |
| TOTAL EFFECTIVE RATE | 88.9% (or 87.9%) | EXTREMELY HIGH. |
π Why itβs dangerous:
- 88.9% total tax means for every $100 of goods, you pay nearly $89 in taxes.
- The 50% Steel/Aluminum duty is the killer. Even if the base duty is low, the layered penalties make metal hangers economically unviable for most US market entries unless priced very high.
π― 4. πͺ΅ Other Wooden Hangers: 4421.99.98.80
Classification: Other wooden articles (Not specifically hangers).
| Tax Component | Rate | Explanation |
|---|---|---|
| Base Duty | 3.3% | Low base rate. |
| Section 301 (Add'l) | 25.0% | Full Section 301 penalty. |
| Section 122 | 10.0% | Additional duty. |
| TOTAL EFFECTIVE RATE | 38.3% | High due to full Section 301 application. |
π Warning:
If your wooden hangers do not fit the specific "clothes hanger" description in4421.10, they fall here. The 25% Section 301 surcharge makes this 3x more expensive than the primary wooden hanger code.
π οΈ IV. Customs Clearance Practical Advice
β 1. Strategic Material Selection
| Material | Recommendation | Reason |
|---|---|---|
| Wood | β HIGHLY RECOMMENDED | Only 13.2% total tax. Best margin protection. |
| Plastic | β οΈ ACCEPTABLE | 24.0% tax. Good balance of cost and durability. |
| Metal | β AVOID | ~88% tax. Profit margins will be destroyed. Only use if product requires extreme strength. |
β 2. Documentation Requirements
To ensure smooth clearance and correct HS Code assignment, provide the following:
| Document | Requirement | Detail |
|---|---|---|
| Commercial Invoice | βοΈ Must Specify Material | Clearly state: "100% Wooden Pants Hangers" or "Plastic Pants Hangers". Do NOT just say "Hangers." |
| Product Photos | βοΈ High-Resolution | Show cross-section or material texture if ambiguous (e.g., wood vs. painted steel). |
| Bill of Lading | βοΈ Accurate Description | Match invoice description exactly. |
| Fiber Content/Material Cert | βοΈ For Wood/Plastic | Proves origin of raw material if audited. |
β 3. Common Pitfalls to Avoid
β Pitfall 1: Calling "Steel Hangers" just "Hangers" β Customs may classify under 7326 and apply 88.9% tax.
β
Fix: Always specify material: "Stainless Steel Pants Hanger."
β Pitfall 2: Mixing materials in one shipment β Complex classification.
β
Fix: Ship Wood, Plastic, and Metal separately to avoid confusion and potential misclassification penalties.
β Pitfall 3: Ignoring Section 122 β Unexpected 10% surcharge.
β
Fix: Factor the 10% Section 122 into all price calculations, regardless of material.
π V. Global Market Comparison (Quick Reference)
| Destination | Best Material | Est. Total Duty | Note |
|---|---|---|---|
| πΊπΈ USA | πͺ΅ Wood | 13.2% | Metal is prohibitive (88%). |
| π¨π³ China | Any | Low (~0-5%) | No Section 301/122. Wood/Plastic preferred for volume. |
| πͺπΊ EU | Any | Low (~2-5%) | VAT applies separately. No punitive tariffs. |
| π¬π§ UK | Any | Low (~4-5%) | Post-Brexit tariffs are stable. |
π VI. Conclusion & Action Plan
π― Golden Rule:
"For US Imports, Choose Wood. Avoid Metal."
- Prioritize Wooden Hangers (
4421.10.00.00):- Total Tax: 13.2%
- Lowest cost, simplest compliance.
- Use Plastic Hangers (
3926.30.10.00) as Backup:- Total Tax: 24.0%
- Acceptable if wooden supply chain is weak.
- Avoid Metal Hangers:
- Total Tax: ~88%
- Unless you have a niche high-end market willing to absorb the cost.
π£ Immediate Action Steps: 1. Audit your product specifications: Confirm if your current hangers are wood, plastic, or metal. 2. Renegotiate with suppliers: If you are currently shipping metal hangers to the US, switch to wood or plastic immediately. 3. Update HS Codes: Ensure your customs broker uses 4421.10.00.00 for wood and 3926.30.10.00 for plastic. 4. Calculate Landed Cost: Include 13.2% (wood) or 24.0% (plastic) in your pricing model. Do not use 0% or 5%.
β¨ Smart Importing Starts with Smart Classification!
πΌ Donβt let an 88% tax rate destroy your margin. Optimize now!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.