plastic outer surface wallet long
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3923900080 | 38.0% | CN | US | Official Doc |
| 3923109000 | 38.0% | CN | US | Official Doc |
| 4202322000 | 55.0% | CN | US | Official Doc |
| 4202321000 | 0.0% | CN | US | Official Doc |
| 4202391000 | 40.3% | CN | US | Official Doc |
Product Images
AI Analysis
π Plastic Outer Surface Wallet (Long Format)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Compliance Strategy
π I. Product Definition & Classification: Do You Really Understand the "Long Plastic Wallet"?
A long plastic wallet is typically defined as an accessory designed to carry cards, cash, and personal items, with an outer surface made primarily of plastic materials (such as PVC, PU, or laminated plastic sheets). It is designed to be carried in a pocket or handbag.
In international trade, classification depends heavily on: 1. Material Composition: Is the outer surface strictly plastic? 2. Structure: Is it a single compartment (pouch-like) or a multi-fold wallet with coin slots/card pockets? 3. Usage: Is it specifically for coins (change purse) or general card/cash storage?
β οΈ Key Distinction:
- If it is a simple plastic pouch/bag for holding items without structured card slots β It may fall under Chapter 39 (Plastics and Articles Thereof).
- If it has specific wallet features (card slots, folding structure) and is classified as a "goods of a kind normally carried in the pocket or handbag" β It falls under Chapter 42 (Articles of Leather; Related Articles).
- The outer material determines the sub-heading in Chapter 42.
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Application Scenario | Key Determinant |
|---|---|---|---|
3923.90.00.80 |
Articles for the conveyance or packaging of goods, of plastics: Other | Plastic Wallet as Packaging/Pouch: Simple plastic wallet, often used for promotional giveaways or as a protective pouch for items. | β Packaging/Pouch-like structure, no complex wallet internals. |
3923.10.90.00 |
Sac(s), bag(s), of plastics | Plastic Material Wallet: Generic plastic wallet, fits into "bags/sacs" category if structure is loose or pouch-like. | β Generic plastic bag/wallet form, no specific "wallet" construction defined in Ch 42. |
4202.32.20.00 |
Articles of a kind normally carried in the pocket or handbag, with outer surface of synthetic plastic sheeting | Plastic Shell Wallet: Classic long wallet with plastic exterior, used for carrying cards/cash. | β Standard Wallet Function, Synthetic Plastic Outer Surface. |
4202.32.10.00 |
With outer surface of reinforced or laminated plastic | Reinforced/Laminated Plastic Wallet: Durable wallets with laminated plastic coating (e.g., high-end PVC, laminated PU). | β Laminated/Reinforced Plastic, specific durable goods classification. |
4202.39.10.00 |
Other, with inner lining of textile material | Plastic Change Purse/Small Pouch: Often small, plastic outer with textile interior, for coins/small items. | β Small/Change Purse, Textile Lining, not a full-sized card wallet. |
π Critical Reminder:
- If the item is a standard long wallet for cards and cash with a plastic exterior, it is most commonly classified under 4202.32 (Wallets of synthetic plastic sheeting).
- If it is a simple plastic pouch without distinct wallet compartments, 3923 may apply, but customs often challenge this if it resembles a wallet.
- Chapter 42 takes precedence for items "of a kind normally carried in the pocket or handbag" (i.e., wallets), unless they are purely packaging.
π° III. 2026 Latest Tariff Rate Breakdown (Including Additional Duties & Policy Surcharges)
β Applicable Country: United States (US)
β Country of Origin: China (CN)
β Effective Date: Post-November 10, 2025 (including subsequent imports)
π― 1. 3923.90.00.80 & 3923.10.90.00 ββ Plastic Wallets as Packaging/Pouches
| Item | Content |
|---|---|
| Base Duty Rate | 3.0% (Ad Valorem) |
| USITC Additional Duty (Section 301) | +25% |
| IEEPA Additional Duty (Section 122/China Specific) | +10% |
| Total Tax Rate | 38.0% |
| Tax Calculation | CIF Value Γ 38% |
| De Minimis Exemption | β Not Eligible (Value threshold exceeded for high-tariff items) |
| Legal Basis Path | USITC:3923.10.90.00 β FOOTNOTE:3923.10.90.00 β IEEPA:9903.01.24 |
π Explanation:
- These codes are often used for promotional plastic wallets or simple pouches.
- The 38% total rate is driven by the 25% Section 301 tariff plus 10% IEEPA surcharge on Chinese goods.
- Risk: Customs may reclassify to Chapter 42 if the item has clear wallet features (card slots), increasing the duty.
π― 2. 4202.32.20.00 ββ Standard Plastic Wallets (Synthetic Plastic Sheet)
| Item | Content |
|---|---|
| Base Duty Rate | 20.0% (Ad Valorem) |
| USITC Additional Duty (Section 301) | +25% |
| IEEPA Additional Duty (Section 122/China Specific) | +10% |
| Total Tax Rate | 55.0% |
| Tax Calculation | CIF Value Γ 55% |
| De Minimis Exemption | β Not Eligible |
| Legal Basis Path | USITC:4202.32.20.00 β FOOTNOTE:4202.32.20.00 β IEEPA:9903.01.24 |
π Explanation:
- This is the most common classification for long plastic wallets with card slots and folding structures.
- The base duty (20%) is significantly higher than plastic packaging (3%).
- Total 55% is a high-cost item. Importers must factor this into pricing.
π― 3. 4202.32.10.00 ββ Reinforced/Laminated Plastic Wallets
| Item | Content |
|---|---|
| Base Duty Rate | 12.1Β’/kg + 4.6% (Compound Rate) |
| USITC Additional Duty (Section 301) | +25% |
| IEEPA Additional Duty (Section 122/China Specific) | +10% |
| Total Tax Rate | 12.1Β’/kg + 4.6% + 35.0% (Effective combined burden varies by weight) |
| Tax Calculation | Weight-based (Β’/kg) + Value-based (4.6%) + Surcharges (35% of value) |
| De Minimis Exemption | β Not Eligible |
| Legal Basis Path | USITC:4202.32.10.00 β FOOTNOTE:4202.32.10.00 β IEEPA:9903.01.24 |
π Explanation:
- Applies to wallets made of laminated or reinforced plastic (e.g., high-density PVC, coated fabrics with plastic layers).
- The compound duty makes cost prediction complex: lighter wallets face higher effective ad valorem rates due to the per-kg charge.
- Surcharges are still applied to the value portion.
π― 4. 4202.39.10.00 ββ Plastic Change Purses/Small Pouches
| Item | Content |
|---|---|
| Base Duty Rate | 5.3% (Ad Valorem) |
| USITC Additional Duty (Section 301) | +25% |
| IEEPA Additional Duty (Section 122/China Specific) | +10% |
| Total Tax Rate | 40.3% |
| Tax Calculation | CIF Value Γ 40.3% |
| De Minimis Exemption | β Not Eligible |
| Legal Basis Path | USITC:4202.39.10.00 β FOOTNOTE:4202.39.10.00 β IEEPA:9903.01.24 |
π Explanation:
- Often used for small plastic wallets with textile linings or those classified as "other" wallets not fitting the synthetic plastic sheet sub-heading.
- Lower base duty (5.3%) makes this attractive, but the structure must match (e.g., small, coin-focused, textile-lined).
π οΈ IV. Customs Clearance Practical Advice (Battle-Tested Pitfall Avoidance Guide)
β 1. Documentation Checklist (No Exceptions)
| Document | Mandatory | Description |
|---|---|---|
| β Product Specification Sheet | βοΈ | Dimensions, material composition (e.g., "100% PVC outer"), features (card slots, zip, etc.) |
| β Product Photos | βοΈ | Front, back, interior, and close-up of material texture. Must show plastic outer surface. |
| β Commercial Invoice | βοΈ | Clearly state: "Long Plastic Wallet, Model XYZ, Material: PVC/PU" |
| β Packing List | βοΈ | Weight and quantity. Critical for compound duty calculations (4202.32.10.00). |
| β Material Declaration | βοΈ | Confirm if plastic is reinforced/laminated or standard sheet. Affects HS code selection. |
| β FCC/RoHS Compliance (if applicable) | βοΈ | Though not electronic, some plastics may require RoHS for environmental compliance in US. |
β 2. Declaration Strategy (Key Mantra)
π₯ "Outer Material Dictates Chapter, Function Determines Sub-Heading, Lamination Changes Duty Base!"
| Scenario | Correct HS Code | Incorrect Practice | Consequence |
|---|---|---|---|
| Standard long wallet, PVC outer, card slots | 4202.32.20.00 |
Misdeclare as 3923 (Packaging) |
Risk of reclassification + penalty (Duty jumps from 38% to 55%) |
| Laminated PVC wallet (high durability) | 4202.32.10.00 |
Misdeclare as 4202.32.20 |
Risk of compound duty vs. ad valorem mismatch (Audit risk) |
| Simple plastic pouch, no card slots | 3923.90.00.80 |
Declare as 4202.32.20 |
Overpayment of duty (38% vs 55%) |
| Small plastic change purse, textile lining | 4202.39.10.00 |
Declare as 4202.32.20 |
Potential underpayment if base duty differs significantly |
β 3. Special Circumstances Handling
| Situation | Handling Advice |
|---|---|
| OEM Custom Wallets | Provide design sketches showing card slots and folding structure to justify Chapter 42. |
| "Plastic-Looking" Fabric Wallets | If outer surface is textile coated with plastic, it may still be 4202.39 or 4202.32 depending on coating thickness. Consult a broker. |
| Laminated Plastic | Must explicitly state "Laminated" in declaration. If not declared, customs may assume standard plastic sheet (4202.32.20). |
| Promotional Plastic Bags with Logo | If no structural wallet features, use 3923. If it has a flap and snaps, itβs a wallet (4202). |
π V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff (China Origin) | Certification | Notes |
|---|---|---|---|---|
| πΊπΈ United States | 4202.32.20.00 |
55% (Total) | FCC (if applicable), RoHS | High surcharge due to Section 301 & IEEPA |
| π¨π³ China | 4202.32.20.00 |
~10-15% | CCC (if electronic components, else N/A) | No additional surcharges |
| πͺπΊ European Union | 4202.32.10 / 4202.32.90 |
4.5% - 5.5% | CE (if applicable), REACH | No Section 301 equivalent |
| π¬π§ United Kingdom | 4202.32.10 / 4202.32.90 |
4.5% - 5.5% | UKCA (if applicable) | Post-Brexit tariffs |
| π―π΅ Japan | 4202.32.10 / 4202.32.90 |
10% - 12% | PSE (if applicable) | Moderate tariff |
π Conclusion:
- The US market is the most expensive due to 55% total duty for standard plastic wallets.
- EU, UK, and Japan offer significantly lower tariffs (~5-12%), making them more attractive for high-volume plastic wallet exports.
- Strategic Recommendation: If targeting the US, consider value-added design or packaging strategies to justify different classification, or explore third-country assembly (e.g., Vietnam, Indonesia) to avoid China-specific surcharges.
π VI. Common Errors & Pitfalls (Lessons Learned)
β Error 1: Classifying a standard card wallet as packaging (3923)
π Consequence: Customs audit finds wallet features β Reclassification to 4202 β Back taxes + 55% duty instead of 38%.
β Error 2: Ignoring lamination in declaration
π Consequence: If laminated, 4202.32.10.00 (compound duty) applies. Misdeclaring as 4202.32.20.00 leads to underpayment and penalties.
β Error 3: Vague description: "Plastic Bag"
π Consequence: Customs may assign residual duty or highest applicable rate β Cost uncertainty.
β Error 4: Using "De Minimis" (Section 321) for high-value plastic wallets
π Consequence: Not eligible due to high tariff rates and IEEPA restrictions. Shipment held or taxed.
β Correct Practice:
"Long Wallet, PVC Outer Surface, Synthetic Plastic Sheet, with Card Slots and Zipper Closure, Model PLW-001, Origin: China"
π― VII. Conclusion: Precise Classification Saves Money!
π― Remember the Mantra:
πΉ "Plastic Outer? Check Chapter 42. Card Slots? Itβs a Wallet. Laminated? Compound Duty. Promotional Pouch? Chapter 39."
πΉ "US Duty is 55% for Standard Plastic Wallets. Plan your pricing accordingly!"
π Pro Tip:
- If your product is simple, unstructured, and clearly a pouch, push for 3923 (38% duty) but be prepared to justify why itβs not a wallet.
- If itβs a proper wallet, embrace 4202.32.20.00 (55% duty) and ensure accurate material description to avoid audits.
- Consider pre-ruling with US Customs (CBP) if volume is high.
π£ Immediate Action:
π Consult a licensed customs broker + Provide product photos + Submit pre-ruling request if necessary.
π Ensure your HS Code matches the physical product to avoid costly delays and penalties.
β¨ Professional clearance starts with precise classification!
πΌ Every cent saved in duty is pure profit!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.