quartzite cutting
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 6810990020 | 35.0% | CN | US | Official Doc |
| 6810990040 | 35.0% | CN | US | Official Doc |
| 6802990050 | 41.5% | CN | US | Official Doc |
| 2506200080 | 35.0% | CN | US | Official Doc |
| 2516120030 | 37.8% | CN | US | Official Doc |
Product Images
AI Analysis
🪨 Quartzite Cutting (Quartzite Slabs/Cut-to-Size)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
📌 I. Product Definition & Classification: What is "Quartzite Cutting"?
Quartzite is a hard, non-foliated metamorphic rock formed from sandstone. In international trade, "Quartzite Cutting" typically refers to: - Quartzite Slabs/Plates: Cut to specific sizes for countertops, flooring, or wall cladding. - Processed Stone: May be polished, honed, or sawn. - Not Man-Made Quartz: Distinct from engineered quartz (which falls under Chapter 68 or 69).
⚠️ Key Distinction:
- If it’s natural stone (quartzite) cut into plates/slabs → Likely Chapter 25 or 68.
- If it’s engineered/man-made quartz → Likely Chapter 68 (ceramic/stone制品).
- Shape matters: “Cutting” implies processed plates/slabs, not raw blocks.
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
Based on the provided data, here are the 5 matched HS Codes for Quartzite Cutting, with detailed explanations for each:
| HS Code | Product Description | Matching Logic (Why it fits) |
|---|---|---|
| 6810.99.00.20 | Other articles of cement, concrete, or artificial stone | Matches material (quartzite is a stone/man-made stone category) and form (plates/slabs). Fits quartz-like countertop products. |
| 6810.99.00.40 | Agglomerated quartz plates | Matches material (quartz) and use (plates after cutting). “Cutting” implies processed板材, fitting “agglomerated quartz plates”. |
| 6802.99.00.50 | Worked stone (natural) other than slate | Product name explicitly includes material (quartzite) and form (plates). Fully matches this code for worked natural quartzite plates. |
| 2506.20.00.80 | Quartz, other than natural sand | Matches material (quartzite) and form (saw-cut plates). Fits the “other categories” for sawn quartzite plates. |
| 2516.12.00.30 | Granite, whether or not roughly trimmed or cut by saw or other method into blocks or slabs of rectangular shape | Matches material (quartzite is analogous to granite in classification) and form (sawn/cut into plates). |
🔍 Critical Note:
- 6810.99.00.20 & .40: Treat quartzite as artificial/man-made stone or agglomerated quartz.
- 6802.99.00.50: Treats it as worked natural stone.
- 2506.20.00.80: Treats it as raw quartz product (sawn).
- 2516.12.00.30: Treats it as granite-analogous stone.
Classification depends on whether the product is natural, engineered, or agglomerated!
💰 III. 2026 Latest Tariff Rate Breakdown (Including Additional Duties & Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: From November 10, 2025 (including subsequent imports)
🎯 1. 6810.99.00.20 — Articles of Artificial Stone (Quartz-like)
| Item | Content |
|---|---|
| Basic Tariff | 0% (ad valorem) |
| USITC Additional Duty | +25% (from USITC Footnote 9903.88.01) |
| IEEPA Additional Duty | +10% (for China/HK products, effective Nov 10, 2025) |
| Total Rate | 35.0% |
| Tax Calculation | CIF Value × 35% |
| De Minimis Eligible? | ❌ No (deny_de_minimis) |
| Legal Basis Path | IEEPA:9903.01.25 → IEEPA:9903.01.24 → USITC:6810.99.00.20 → FOOTNOTE:9903.88.01 |
📌 Explanation:
- “USITC 25%” is from Section 301 additional duties.
- “IEEPA 10%” is the extra tariff under IEEPA for China-origin goods.
- Total 35% is a high tariff — must be pre-estimated!
🎯 2. 6810.99.00.40 — Agglomerated Quartz Plates
| Item | Content |
|---|---|
| Basic Tariff | 0% |
| USITC Additional Duty | +25% |
| IEEPA Additional Duty | +10% |
| Total Rate | 35.0% |
| Tax Calculation | CIF × 35% |
| De Minimis Eligible? | ❌ No |
| Legal Basis Path | IEEPA:9903.01.25 → IEEPA:9903.01.24 → USITC:6810.99.00.40 → FOOTNOTE:9903.88.01 |
📌 Note:
- Same as above; applies to agglomerated quartz plates.
- Even if “polished” or “sawn”, if it’s agglomerated, this code applies.
🎯 3. 6802.99.00.50 — Worked Natural Stone (Quartzite Plates)
| Item | Content |
|---|---|
| Basic Tariff | 6.5% |
| USITC Additional Duty | +25% |
| IEEPA Additional Duty | +10% |
| Total Rate | 41.5% |
| Tax Calculation | CIF × 41.5% |
| De Minimis Eligible? | ❌ No |
| Legal Basis Path | IEEPA:9903.01.25 → IEEPA:9903.01.24 → USITC:6802.99.00.50 → FOOTNOTE:9903.88.01 |
📌 Warning:
- This has the highest base rate (6.5%) among the options.
- Total 41.5% is extremely high.
- Only use if the product is clearly natural worked stone (not agglomerated/engineered).
🎯 4. 2506.20.00.80 — Quartz (Saw-cut Plates)
| Item | Content |
|---|---|
| Basic Tariff | 0% |
| USITC Additional Duty | +25% |
| IEEPA Additional Duty | +10% |
| Total Rate | 35.0% |
| Tax Calculation | CIF × 35% |
| De Minimis Eligible? | ❌ No |
| Legal Basis Path | IEEPA:9903.01.25 → IEEPA:9903.01.24 → USITC:2506.20.00.80 → FOOTNOTE:9903.88.01 |
📌 Note:
- Treats quartzite as a quartz product rather than stone.
- Useful if the product is raw sawn quartzite plates.
🎯 5. 2516.12.00.30 — Granite-like Stone (Sawn Plates)
| Item | Content |
|---|---|
| Basic Tariff | 2.8% |
| USITC Additional Duty | +25% |
| IEEPA Additional Duty | +10% |
| Total Rate | 37.8% |
| Tax Calculation | CIF × 37.8% |
| De Minimis Eligible? | ❌ No |
| Legal Basis Path | IEEPA:9903.01.25 → IEEPA:9903.01.24 → USITC:2516.12.00.30 → FOOTNOTE:9903.88.01 |
📌 Note:
- Analogous to granite classification.
- Total 37.8% is slightly higher than 35% due to the 2.8% base tariff.
🛠️ IV. Customs Clearance Practical Advice (Real-World Pitfall Avoidance Guide)
✅ 1. Required Documentation List (All Are Mandatory)
| Document | Required | Explanation |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Include dimensions, thickness, finish (polished/honed), use (countertop/flooring) |
| ✅ Material Composition Report | ✔️ | Must clearly state natural quartzite vs. engineered/agglomerated quartz |
| ✅ Product Photos (with label) | ✔️ | Clear images of the slab, edges, and any markings |
| ✅ Third-Party Test Report | ✔️ | If applicable: NSF, CARB, EPA (for formaldehyde if engineered) |
| ✅ Commercial Invoice | ✔️ | Must specify “Quartzite Slab/Cutting, Natural/Engineered” |
| ✅ Certificate of Origin (CO) | ✔️ | If not China-origin, may qualify for duty reduction |
| ✅ Packing List | ✔️ | Clarify packing unit (slab, crate, pallet) |
✅ 2. Declaration Tips (Key Mnemonics)
🔥 “Material First, Form Second, Origin Clear, Tax Avoided!”
| Scenario | Correct Declaration | Wrong Approach |
|---|---|---|
| Natural Quartzite Slab | 6802.99.00.50 or 2506.20.00.80 |
Misdeclare as granite → 37.8% |
| Engineered/Agglomerated Quartz | 6810.99.00.20 or .40 |
Misdeclare as natural → 41.5% |
| Quartzite Countertop (Finished) | 6810.99.00.20 |
Misdeclare as slab → 41.5% |
| Raw Quartzite Block | Different HS Code (Chapter 25) | Declare as slab → Wrong classification |
✅ 3. Special Case Handling
| Scenario | Handling Advice |
|---|---|
| OEM Custom Cut | Provide client order + design drawings to avoid “non-standard” flags |
| Quartzite + Edge Profile | Still classify as slab/cutting; edge profile doesn’t change HS Code |
| Mixed Packaging (Slab + Adhesive) | Declare slab separately; adhesive as a separate item if possible |
| Used/Recycled Quartzite | May require additional environmental compliance docs |
🌍 V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff | Certification | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 6810.99.00.20 / 6802.99.00.50 |
35%–41.5% | NSF, CARB | High duties due to Section 301 + IEEPA |
| 🇨🇳 China | 6802.99.00.50 |
6.5% | CCC (if applicable) | No additional duties |
| 🇪🇺 EU | 6802.99.00.50 |
0–6.5% | CE (if applicable) | No extra duties |
| 🇦🇺 Australia | 6802.99.00.50 |
5% | RCM | No extra duties |
| 🇯🇵 Japan | 6802.99.00.50 |
0–5% | PSE | No extra duties |
📌 Conclusion:
- USA is the only market with high additional duties (Section 301 + IEEPA).
- China-origin quartzite in the US faces 35%–41.5% total tariffs.
- Consider supply chain diversification (e.g., Vietnam, India, Brazil) to mitigate risks.
📌 VI. Common Mistakes & Pitfall Guide (Lessons Learned the Hard Way)
❌ Mistake 1: Declaring engineered quartz as natural quartzite
👉 Consequence: Wrong HS Code → Audit + Penalties + Back Duties
❌ Mistake 2: Omitting “Natural” vs. “Engineered” in description
👉 Consequence: Customs ambiguity → Delayed release or rejection
❌ Mistake 3: Using vague terms like “Stone Slab” without material specification
👉 Consequence: Misclassification → Higher duty or seizure
❌ Mistake 4: Assuming all quartz products are the same
👉 Consequence: 6810 (engineered) vs. 6802 (natural) have different base tariffs
✅ Correct Practice:
“Natural Quartzite Slab, 20mm Thick, Polished Finish, For Countertop Use, Origin: China”
OR
“Engineered Quartz Plate, 12mm, White, Agglomerated, For Kitchen Countertop”
🎯 VII. Conclusion: Precise Classification Saves Time & Money!
🎯 Remember Mnemonics:
🔹 “Natural vs. Engineered, Classify Right or Lose Light!”
🔹 “HS Code Determines Tax, 6.5% vs. 0% Base, 35%–41.5% Total!”
🔹 “One Mistake in Material, Costs Thousands in Duties!”
📌 Pro Tip:
If your quartzite is originating from Vietnam, India, Brazil, or Italy, you may avoid US Section 301 + IEEPA duties.
Apply for Advance Ruling (Pre-classification) to avoid clearance risks.
📣 Immediate Action:
📞 Contact a licensed customs broker + Provide product specs + Apply for HS Code Advance Ruling
🚀 Ensure smooth clearance, efficient export, and maximized profit margins!
✨ Professional clearance starts with accurate classification!
💼 Every cent of cost deserves precise calculation!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.