stainless steel cylindrical pin
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 7326190080 | 87.9% | CN | US | Official Doc |
| 7318230000 | 85.0% | CN | US | Official Doc |
| 7326908688 | 87.9% | CN | US | Official Doc |
| 8482910090 | 39.4% | CN | US | Official Doc |
| 7318290000 | 87.8% | CN | US | Official Doc |
Product Images
AI Analysis
π οΈ Stainless Steel Cylindrical Pin (Stainless Steel Fasteners)
π HS Code Classification & Tariff Guide | 2026 Latest Customs Rules | Professional Import Strategy
π One Product, Five HS Codes β Why the Difference? Letβs Break It Down!
A stainless steel cylindrical pin may seem like a simple mechanical component β but in international trade, its HS code classification can vary dramatically depending on material, shape, function, and structural logic. This leads to tax differences of up to 50% β a massive impact on your bottom line.
β οΈ Critical Insight:
- Same product, different HS codes β Different tariffs
- Incorrect classification = Overpayment, delays, penalties
- Only one code is correct for your specific case
π δΊγHS Code Classification Breakdown (2026 Official Tariff Authority)
| HS Code | Product Description | Classification Logic | Key Tax Implication |
|---|---|---|---|
7318.29.00.00 |
Stainless steel cylindrical pin, made of stainless steel (iron/steel), shaped as a non-threaded fastener, fits non-threaded fastener category | Fits "other non-threaded fasteners" under HS 7318.29 | π΄ 87.8% total tariff |
7326.19.00.80 |
Stainless steel cylindrical pin, made of stainless steel (steel product), cylindrical shape, falls under "other steel articles" category | Matches "other steel articles and parts" as a catch-all | π΄ 87.9% total tariff |
7318.23.00.00 |
Stainless steel cylindrical pin, made of stainless steel (iron or steel), shaped as a pin β fits rivets, pins, and dowels category | Direct match for "pins, dowels, and rivets" under 7318.23 | π’ 85.0% total tariff (Lowest among all) |
7326.90.86.88 |
Stainless steel cylindrical pin, made of iron/steel, shaped as a pin, fits "other iron or steel articles" as a residual category | Generic "other" steel item β used when no better fit exists | π΄ 87.9% total tariff |
8482.91.00.90 |
Stainless steel cylindrical pin, part of bearing assemblies, used as a structural component in bearings | Classified as "other parts of ball or roller bearings" | π‘ 39.4% total tariff (Major savings!) |
β Key Takeaway:
-8482.91.00.90is the most favorable β only 39.4% total tariff
- But only if the pin is structurally part of a bearing system
-7318.23.00.00is the second-best β 85.0% β if it's a standalone pin
π° δΈγ2026 Tariff Breakdown (U.S. Market | China Origin)
β Applicable Country: United States (US)
β Origin: China (CN)
β Effective Date: November 10, 2025 (and ongoing)
π― 1. 7318.29.00.00 β Non-threaded Fasteners (Stainless Steel Pins)
| Tax Item | Rate | Legal Basis |
|---|---|---|
| Base Duty | 2.8% | Standard U.S. tariff |
| Section 301 (USITC) | +25.0% | From U.S. Trade Act 301 (China tariffs) |
| Section 122 (Steel, Aluminum, Copper) | +10% | 122ζ‘ζ¬Ύ: Tariff on steel, aluminum, copper products |
| Additional 122 Clause (Steel/Al/Cu) | +50% | Extra 50% on steel, aluminum, copper items |
| Total Tariff | 87.8% | CIF Γ 87.8% |
π Why so high?
- The pin is steel-based, so all steel-specific tariffs apply
- 50% extra tariff under 122ζ‘ζ¬Ύ β a critical trap
- Even non-threaded pins are caught if made of steel
π― 2. 7326.19.00.80 β Other Steel Articles (Catch-All)
| Tax Item | Rate | Legal Basis |
|---|---|---|
| Base Duty | 2.9% | Standard U.S. tariff |
| Section 301 (USITC) | +25.0% | China tariff |
| Section 122 (Steel, Al, Cu) | +10% | Steel product classification |
| Additional 122 Clause (Steel/Al/Cu) | +50% | 50% extra on steel-based items |
| Total Tariff | 87.9% | CIF Γ 87.9% |
π Note:
- Only 0.1% higher than7318.29.00.00, but still extremely high
- Used when no better fit exists β not recommended
π― 3. 7318.23.00.00 β Pins, Dowels, Rivets (Best Fit for Standalone Pins)
| Tax Item | Rate | Legal Basis |
|---|---|---|
| Base Duty | 0.0% | Zero base tariff for this subheading |
| Section 301 (USITC) | +25.0% | China tariff applies |
| Section 122 (Steel, Al, Cu) | +10% | Steel product |
| Additional 122 Clause (Steel/Al/Cu) | +50% | 50% extra on steel items |
| Total Tariff | 85.0% | CIF Γ 85.0% |
β Best Option for Standalone Pins
- Zero base duty β lower starting point
- 85.0% total is the lowest among all steel-based codes
- Must be used for non-bearing, standalone pins
π― 4. 7326.90.86.88 β Other Iron/Steel Articles (Residual Category)
| Tax Item | Rate | Legal Basis |
|---|---|---|
| Base Duty | 2.9% | Standard |
| Section 301 (USITC) | +25.0% | China tariff |
| Section 122 (Steel, Al, Cu) | +10% | Steel product |
| Additional 122 Clause (Steel/Al/Cu) | +50% | 50% extra |
| Total Tariff | 87.9% | CIF Γ 87.9% |
β Not recommended β same as
7326.19.00.80, but no better justification
π― 5. 8482.91.00.90 β Other Parts of Bearings (Game-Changer!)
| Tax Item | Rate | Legal Basis |
|---|---|---|
| Base Duty | 4.4% | Standard |
| Section 301 (USITC) | +25.0% | China tariff |
| Section 122 (Steel, Al, Cu) | +10% | Steel product |
| No 50% extra tariff | β Not applied | Because itβs a bearing part β not a general steel item |
| Total Tariff | 39.4% | CIF Γ 39.4% |
β HUGE SAVINGS β 50% lower than steel-only codes!
β Only applies if the pin is a structural part of a bearing assembly
β No 50% extra tariff under 122ζ‘ζ¬Ύ β critical advantageπ Example:
- If the pin connects bearing rings, holds rollers, or maintains alignment, it qualifies
- If itβs just a standalone pin, this code does NOT apply
π οΈ εγCustoms Clearance Strategy (Pro Tips to Avoid Pitfalls)
β 1. Required Documentation (Must-Have)
| Document | Required? | Why It Matters |
|---|---|---|
| β Product Specification Sheet | βοΈ | Shows material (stainless steel), dimensions, tolerance |
| β Engineering Drawing / CAD | βοΈ | Proves bearing integration (for 8482.91.00.90) |
| β Product Photos (with markings) | βοΈ | Clear view of shape, surface finish, part number |
| β Certificate of Origin (CO) | βοΈ | Needed for tariff claims (e.g., if from Vietnam, can avoid 301) |
| β Commercial Invoice | βοΈ | Must state "Stainless Steel Cylindrical Pin" and HS code |
| β Test Report (e.g., ISO 9001, RoHS) | βοΈ | Helps prove quality, avoid rejections |
β 2.η³ζ₯ζε·§οΌKey RulesοΌ
π₯ "Pin Type, Use Case, and Structure Decide the Code!"
| Scenario | Correct HS Code | Why |
|---|---|---|
| Standalone pin, no bearing role | 7318.23.00.00 |
Best fit β lowest tariff (85.0%) |
| Pin is part of a bearing assembly | 8482.91.00.90 |
Only 39.4% β save 45.6% |
| No clear use case, just "steel part" | β Avoid 7326.90.86.88 |
87.9% β too high |
| Pin with threads? | β Not applicable β this is non-threaded | Would be 7318.22.00.00 |
π Pro Tip:
- If you're selling to a bearing manufacturer, claim the bearing part status
- Provide assembly diagrams to prove integration
β 3. Special Cases & Risk Mitigation
| Case | Recommended Action |
|---|---|
| Pin used in industrial machinery (not bearing) | Use 7318.23.00.00 β 85.0% |
| Pin sold with bearing kit | Use 8482.91.00.90 β 39.4% |
| Pin from non-China origin (e.g., Vietnam, Mexico) | Apply for IEEPA exemption β 0% on 301/122 tariffs |
| Pin with custom coating or special treatment | Provide material test report β avoid misclassification |
π δΊγGlobal Market Tariff Comparison (2026)
| Country | Recommended HS Code | Base Duty | 301/122 Extra | Total Tariff | Notes |
|---|---|---|---|---|---|
| πΊπΈ USA | 8482.91.00.90 |
4.4% | +35.0% | 39.4% | Best for bearing pins |
| π¨π³ China | 7318.23.00.00 |
5.0% | 0% | 5.0% | No extra tariffs |
| πͺπΊ EU | 7318.23.00.00 |
0% | 0% | 0% | No 301/122 tariffs |
| π¦πΊ Australia | 7318.23.00.00 |
5.0% | 0% | 5.0% | No extra |
| π―π΅ Japan | 7318.23.00.00 |
0% | 0% | 0% | No extra tariffs |
π Conclusion:
- USA is the only market with 50% extra tariff on steel items
- Only the U.S. applies the 50% 122ζ‘ζ¬Ύ extra
- For non-U.S. markets, tariffs are much lower
π ε γεΈΈθ§ιθ―― & How to Avoid Them
β Mistake 1: Using 7326.90.86.88 for a standalone pin
π Result: 87.9% tariff β overpaying by 2.9% β avoidable
β Mistake 2: Not proving bearing integration
π Result: Denied 8482.91.00.90 β forced to use 7318.23.00.00 β 45.6% more in tax
β Mistake 3: Using "pin" as the only description
π Result: Customs canβt determine function β delayed clearance or reclassification
β Correct Description Example:
"Stainless Steel Cylindrical Pin, 6mm Γ 30mm, used as a structural component in ball bearing assemblies, for industrial machinery, ISO 9001 certified"
π― δΈγFinal Verdict: Choose the Right Code, Save Thousands!
π₯ Golden Rule:
- If the pin is part of a bearing β Use8482.91.00.90β 39.4%
- If standalone β Use7318.23.00.00β 85.0%
- Never use7326.90.86.88or7326.19.00.80β too highπ Bottom Line:
- A 1% difference in HS code = 50% difference in tax
- Proper classification saves tens of thousands per shipment
π£ Call to Action: Act Now!
π Contact a licensed customs broker + provide:
- Product photos
- Engineering drawings
- Use case descriptionπ Request an HS Code Pre-Ruling (Advance Ruling)
- Get legal certainty before shipment
- Avoid delays, fines, and overpayment
β¨ Your Pin. Your Profit. Your Precision.
πΌ Smart Classification = Lower Tariffs = Faster Shipments = More Margin!
π― Remember:
"A pin is not just a pin β itβs a tax code!"
Choose wisely β your bottom line depends on it.
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.