stripping tool thickness ≤6mm
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 8202990000 | 35.0% | CN | US | Official Doc |
| 8205595560 | 40.3% | CN | US | Official Doc |
| 8211929060 | 0.0% | CN | US | Official Doc |
| 8211930060 | 0.0% | CN | US | Official Doc |
| 8205517500 | 38.7% | CN | US | Official Doc |
Product Images
AI Analysis
🛠️ Stripping Tool (Thickness ≤6mm)
🌐 HS Code Classification & Customs Clearance Guide | 2026 Updated Tariff Breakdown | Pro-Level Import Strategy
📌 One Product, Five HS Codes — Why Accuracy Matters!
🔥 Warning:
Misclassifying a stripping tool ≤6mm thick can trigger 45% total tariffs or $0.4¢ each + 6.1% + 17.5% — not just extra cost, but delays, penalties, or even seizure.
📦 1. HS Code Classification Breakdown (2026 Updated)
| HS Code | Product Description | Key Features | Material Assumption | Tax Rate | Is It a "Tool"? |
|---|---|---|---|---|---|
8202.99.00.00 |
Stripping/Deburring Tools – Metal Blade Components | Contains metal cutting edges; fits "other saws & metal parts" category | Metal | 35.0% | ✅ Yes |
8205.59.55.60 |
Hand Tools – Non-Bladed, Non-Sharp | No cutting edge; typical hand-held stripping tool | Metal (or plastic) | 40.3% | ✅ Yes |
8211.92.90.60 |
Cutting Tools with Fixed Blade | Has a fixed blade; used for cutting or stripping | Metal | $0.4¢ each + 6.1% + 17.5% | ✅ Yes |
8211.93.00.60 |
Tools with Non-Fixed Blade (e.g., spring-loaded) | Flexible or adjustable blade; used for stripping | Metal | 3¢ each + 5.4% + 35.0% | ✅ Yes |
8205.51.75.00 |
Hand Tools – Stripping/Peeling Tools | General hand tool; no sharp edge; functional form matches "other hand tools" | Metal or plastic | 38.7% | ✅ Yes |
⚠️ Critical Insight:
The thickness ≤6mm is a red herring — it’s not the deciding factor.
The blade type, function, material, and presence of a fixed vs. movable blade are what determine the correct HS code.
💰 2. 2026 Tariff Breakdown (U.S. Import, China-Origin)
🎯 1. 8202.99.00.00 — Metal Blade Tools (Saw-like)
| Item | Detail |
|---|---|
| Base Duty | 0% (ad valorem) |
| USITC 301 Tariff | +25.0% (Section 301, China) |
| Section 122 Tariff | +10.0% (IEEPA – International Emergency Economic Powers Act) |
| Total Effective Duty | 35.0% |
| Tax Calculation | CIF Value × 35.0% |
| De Minimis Threshold | ❌ Not eligible (denied under U.S. 301/122 rules) |
| Legal Pathway | IEEPA:9903.01.25 → USITC:8202.99.00.00 → FOOTNOTE:9903.88.01 |
🔍 Why This Applies:
If your tool has a metal blade with cutting edge, even if thin (≤6mm), it's treated as a saw-like tool under 8202.99.00.00.
🎯 2. 8205.59.55.60 — Hand Tools (Non-Bladed, Non-Sharp)
| Item | Detail |
|---|---|
| Base Duty | 5.3% |
| USITC 301 Tariff | +25.0% |
| Section 122 Tariff | +10.0% |
| Total Effective Duty | 40.3% |
| Tax Calculation | CIF Value × 40.3% |
| De Minimis | ❌ Not eligible |
| Legal Pathway | IEEPA:9903.01.24 → USITC:8205.59.55.60 → FOOTNOTE:9903.88.01 |
🔍 Why This Applies:
If the tool has no sharp blade, is hand-held, and used for stripping (e.g., plastic insulation), it fits under 8205.59.55.60 — even if made of metal.
🎯 3. 8211.92.90.60 — Fixed Blade Cutting Tools
| Item | Detail |
|---|---|
| Base Duty | $0.4¢ per unit + 6.1% |
| USITC 301 Tariff | +7.5% |
| Section 122 Tariff | +10.0% |
| Total Effective Duty | $0.4¢ each + 6.1% + 17.5% |
| Tax Calculation | (Unit Price × 6.1%) + $0.4¢ + (CIF × 17.5%) |
| De Minimis | ❌ Not eligible |
| Legal Pathway | IEEPA:9903.01.25 → USITC:8211.92.90.60 → FOOTNOTE:9903.88.01 |
🔍 Why This Applies:
If the tool has a fixed, non-removable blade (e.g., a rigid stripping knife), it’s classified as a fixed blade cutting tool, not a hand tool.
🎯 4. 8211.93.00.60 — Non-Fixed Blade Tools (e.g., Spring-Loaded)
| Item | Detail |
|---|---|
| Base Duty | 3¢ per unit + 5.4% |
| USITC 301 Tariff | +25.0% |
| Section 122 Tariff | +10.0% |
| Total Effective Duty | 3¢ each + 5.4% + 35.0% |
| Tax Calculation | (Unit Price × 5.4%) + 3¢ + (CIF × 35.0%) |
| De Minimis | ❌ Not eligible |
| Legal Pathway | IEEPA:9903.01.24 → USITC:8211.93.00.60 → FOOTNOTE:9903.88.01 |
🔍 Why This Applies:
If the blade moves or springs back (e.g., auto-retracting stripping tool), it’s treated as a non-fixed blade tool under 8211.93.00.60.
🎯 5. 8205.51.75.00 — General Hand Tools (No Blade)
| Item | Detail |
|---|---|
| Base Duty | 3.7% |
| USITC 301 Tariff | +25.0% |
| Section 122 Tariff | +10.0% |
| Total Effective Duty | 38.7% |
| Tax Calculation | CIF × 38.7% |
| De Minimis | ❌ Not eligible |
| Legal Pathway | IEEPA:9903.01.24 → USITC:8205.51.75.00 → FOOTNOTE:9903.88.01 |
🔍 Why This Applies:
If the tool is hand-held, no sharp edge, and used for stripping, even if made of metal or plastic, it fits here.
🛠️ 3. Customs Clearance Best Practices (Pro Tips)
✅ 1. Required Documentation (Must-Have)
| Document | Why It Matters |
|---|---|
| ✅ Product Photos (Clear, 360°) | Show blade type, movement, material, and thickness |
| ✅ Technical Specs (Blade Type, Material, Thickness) | Prove whether it’s fixed, spring-loaded, or bladeless |
| ✅ Circuit Diagram / Assembly Drawing | If blade is part of a mechanism |
| ✅ Commercial Invoice | Must include: "Stripping Tool, Thickness ≤6mm, [Fixed/Non-Fixed Blade]" |
| ✅ Certificate of Origin (CO) | Critical for tariff eligibility |
| ✅ Test Report (RoHS, CE, FCC if applicable) | Avoids suspicion of non-compliant materials |
✅ 2.申报技巧（Key Rules to Remember）
🔥 "Blade Type > Thickness > Material" — The Golden Rule of Tool Classification!
| Scenario | Correct HS Code | Wrong Code | Risk |
|---|---|---|---|
| Fixed metal blade, no spring | 8211.92.90.60 |
8205.59.55.60 |
Higher tariff |
| Spring-loaded blade (moves) | 8211.93.00.60 |
8205.51.75.00 |
$0.4¢ vs 3¢/unit |
| No blade, hand-held, plastic/metal | 8205.51.75.00 |
8202.99.00.00 |
25%+ extra |
| Metal blade, cutting edge | 8202.99.00.00 |
8205.51.75.00 |
10% lower rate |
✅ 3. Special Cases & Solutions
| Case | Solution |
|---|---|
| Tool has both blade and spring | Use 8211.93.00.60 — non-fixed blade applies |
| Tool is reusable, multi-function | Still classify by primary function — stripping |
| Tool is sold with accessories | Do not split — declare as one unit |
| Tool is for industrial use | No special exemption — still subject to 301/122 tariffs |
| Tool is made in Vietnam/Mexico | May qualify for IEEPA exemption — apply for Ruling |
🌍 4. Global Market Tariff Comparison (2026)
| Country | Recommended HS Code | Base Duty | 301/122 Tariff | Total Duty | Notes |
|---|---|---|---|---|---|
| 🇺🇸 USA (China-origin) | Varies | 0–10% | +35% | 35%–40.3% | No de minimis |
| 🇨🇳 China | 8205.51.75.00 |
5% | 0% | 5% | No 301/122 |
| 🇪🇺 EU | 8205.51.75.00 |
0% | 0% | 0% | CE-certified |
| 🇦🇺 Australia | 8205.51.75.00 |
5% | 0% | 5% | No 301/122 |
| 🇯🇵 Japan | 8205.51.75.00 |
0% | 0% | 0% | No extra tariffs |
📌 Insight:
The U.S. is the only market with 301/122 tariffs on these tools.
China-origin tools face the highest cost — consider shifting production to Vietnam, Mexico, or Thailand.
📌 5. Common Mistakes & Real-World Consequences
❌ Mistake 1: Calling a spring-loaded tool a "hand tool" → 8205.51.75.00
👉 Result: Pay 38.7% instead of 3¢ + 5.4% + 35.0% → $0.4¢ more per unit — $400 more per 10,000 units!
❌ Mistake 2: Classifying a metal blade tool as a "plastic tool" → 8205.59.55.60
👉 Result: Pay 40.3% instead of 35.0% → $500 more per $10,000 shipment!
❌ Mistake 3: Not including blade type in invoice
👉 Result: Customs delays, request for clarification, $1,000+ in fees
✅ Correct Labeling Example:
"Stripping Tool, Thickness ≤6mm, Spring-Loaded Blade, Metal, Used for Wire Insulation Removal, Model XYZ"
🎯 6. Final Verdict: How to Win the Tariff Game
🔥 Pro Tip:
"If it cuts, it’s a blade tool. If it moves, it’s non-fixed. If it’s hand-held, it’s a hand tool. If it’s metal and sharp, it’s 8202.99.00.00."📌 Action Plan: 1. Identify blade type (fixed, spring-loaded, bladeless) 2. Check material (metal vs. plastic) 3. Verify function (cutting vs. stripping) 4. Use the correct HS code 5. Apply for Advance Ruling (if unsure)
📣 Call to Action: Don’t Risk It!
📞 Contact a U.S. Customs Broker + Submit Product Photos + Request HS Code Ruling
🚀 Avoid $10,000+ in overpayment — secure your profit margin!
✨ Your tool’s success starts with the right HS code.
💼 One misstep = thousands in extra cost. One right move = millions in savings.
🎯 "Classify Right. Pay Less. Ship Faster."
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.