uk standard plug
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 8536694010 | 35.0% | CN | US | Official Doc |
| 8536694020 | 35.0% | CN | US | Official Doc |
Product Images
AI Analysis
π UK Standard Plug (BS 1363 Type G)
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Level Entry Strategy
π 1. Product Definition & Classification: Do You Really Understand the "UK Plug"?
The UK Standard Plug (Type G), also known as the British Standard Plug (BS 1363), is one of the most distinctive electrical connectors in the world, featuring three rectangular pins and an integrated fuse. In international trade, plugs and sockets are generally classified under Chapter 85 of the HS Code system, specifically under heading 8536 ("Electrical apparatus for switching or protecting electrical circuits...").
However, the critical distinction lies in the type of connector:
* Standard Power Plugs/Sockets (Type G): These are designed for mains power connection (up to 1000V) and are distinct from specialized connectors like coaxial, cylindrical multicontact, or printed circuit connectors.
* Specialized Connectors: The <DATA> provided specifically lists categories such as "Coaxial connectors," "Cylindrical multicontact connectors," "Rack and panel connectors," "Printed circuit connectors," and "Ribbon or flat cable connectors."
β οΈ Key Classification Point:
A standard UK Mains Power Plug (BS 1363) does NOT fit into the sub-categories listed in<DATA>(8536.69.40.10 or 8536.69.40.20).
- 8536.69.40.10 is for Coaxial connectors (used in TV/Cable/RF signals).
- 8536.69.40.20 is for Cylindrical multicontact connectors (used in industrial aviation/military audio/data).β Correct General HS Code for UK Power Plugs:
Typically 8536.69.00.00 (Other plugs and sockets) or 8536.69.90.00 depending on specific national tariff breakdowns, but NOT 8536.69.40.10/20.
π¦ 2. HS Code Classification Details (Based on <DATA> Constraint)
β οΈ CRITICAL NOTICE:
The <DATA> provided does not contain the standard HS Code for a generic UK Mains Power Plug (Type G). The data only lists specific types of connectors:
1. Coaxial Connectors (8536.69.40.10)
2. Cylindrical Multicontact Connectors (8536.69.40.20)
If you are importing standard UK wall plugs/sockets, they do not match the descriptions in <DATA>.
If you are importing specialized circular connectors that look like UK plugs but are actually cylindrical multicontact (e.g., for audio/military/industrial use with pin 1,2,3,4,5 in a round housing), then they might fall under 8536.69.40.20.
β Misclassification Risk:
- UK Mains Plug (BS 1363): Rectangular pins, fuse inside, square plug body.
- Does NOT fit 8536.69.40.10 (Coaxial) or 8536.69.40.20 (Cylindrical).
- Should be classified under 8536.69.00.00 (Other plugs and sockets) in most national tariffs.
- Cylindrical Multicontact Connector: Round body, multiple small pins (not power pins), used for data/audio.
- FITS 8536.69.40.20.
π Explanation:
The user input "UK Standard Plug" typically refers to the BS 1363 mains plug. This is not a coaxial connector (8536.69.40.10) nor a cylindrical multicontact connector (8536.69.40.20) as defined in the<DATA>.
If you force-classify a UK Mains Plug into 8536.69.40.20, it is likely a customs error, unless the plug is a specialized cylindrical type (e.g., a "UK-style" circular industrial connector).
π° 3. 2026 Latest Tariff Rate Explanation (Based on <DATA>)
β Applicable HS Codes from
<DATA>:
-8536.69.40.10(Coaxial Connectors)
-8536.69.40.20(Cylindrical Multicontact Connectors)
π― 1. If Misclassified as 8536.69.40.20 (Cylindrical Multicontact Connectors)
| Item | Content |
|---|---|
| HS Code | 8536.69.40.20 |
| Product Description | Cylindrical multicontact connectors |
| Base Tariff | 0.0% |
| Additional Tariff | 25.0% |
| Total Tax Rate | 25.0% |
| Tax Detail | εΊη‘ε
³η¨: 0.0%, ε εΎε
³η¨: 25.0% |
| Calculation | CIF Value Γ 25% |
π Why 25%?
This likely reflects Section 301 Tariffs (if importing to the US from China) or a specific country's retaliatory/additional duty on electrical connectors. The<DATA>explicitly states a 25% additional tariff on top of a 0% base tariff.
π― 2. If Misclassified as 8536.69.40.10 (Coaxial Connectors)
| Item | Content |
|---|---|
| HS Code | 8536.69.40.10 |
| Product Description | Coaxial connectors |
| Base Tariff | 0.0% |
| Additional Tariff | 25.0% |
| Total Tax Rate | 25.0% |
| Tax Detail | εΊη‘ε
³η¨: 0.0%, ε εΎε
³η¨: 25.0% |
π Why 25%?
Same as above. The additional tariff applies to both specific connector types listed in<DATA>.
π οΈ 4. Customs Clearance Practical Advice (Avoid Pitfalls)
β 1. Prepare Documentation (Essential)
| Document | Required | Note |
|---|---|---|
| β Product Specification | βοΈ | Clearly state if it is a BS 1363 Power Plug or a Circular Connector. |
| β Technical Drawing | βοΈ | Show pin configuration. Rectangular pins = Power Plug. Round pins = Multicontact. |
| β Photos | βοΈ | Clear images of the plug body, pins, and fuse (if any). |
| β Commercial Invoice | βοΈ | Describe accurately: "BS 1363 Mains Plug, 13A, 250V AC" OR "Cylindrical Multicontact Connector, 5-pin". |
| β Certificate of Origin | βοΈ | Required for tariff calculation. |
β 2. Declaration Tips (Key Mnemonics)
π₯ "Power Plug is Not Coaxial, Circular is Not UK Mains!"
| Scenario | Correct HS Code | Wrong Code | Consequence |
|---|---|---|---|
| Standard UK Mains Plug (BS 1363) | 8536.69.00.00 (General) | 8536.69.40.20 |
Wrong Classification. May be rejected or reclassified, leading to delays. |
| Circular Connector (Round, 3+ pins) | 8536.69.40.20 |
8536.69.40.10 |
Wrong sub-category, but same 25% rate. Less severe, but still an error. |
| Coaxial Connector (RF/SMA/BNC) | 8536.69.40.10 |
8536.69.40.20 |
Wrong sub-category, but same 25% rate. |
β 3. Special Cases
| Case | Handling Advice |
|---|---|
| UK Plug with Adapter | If the adapter is part of the plug, declare as a single unit. If separate, declare separately. |
| Import to USA | Be aware of Section 301 tariffs. The 25% additional tariff is likely due to China-US trade tensions. |
| Import to EU/UK | Different HS codes apply. UK uses the UK Tariff. EU uses the Combined Nomenclature. |
π 5. Global Customs Comparison (2026)
| Country/Region | Recommended HS Code for UK Plug | Tariff | Note |
|---|---|---|---|
| πΊπΈ USA | 8536.69.00.00 (General) or 8536.69.40.20 (if misclassified) |
25% (Additional) + Base | <DATA> shows 25% additional. Base may be 0%. |
| π¬π§ UK | 8536.69.00.00 |
0% | No additional tariffs for standard plugs. |
| πͺπΊ EU | 8536.69.90 |
0% | Most electrical connectors are duty-free in EU. |
| π¨π³ China | 8536.69.00.00 |
0% - 5% | Depends on specific type. |
π Conclusion:
- USA: High risk of 25% additional tariff if classified under specific connector categories.
- UK/EU: Generally 0% for standard power plugs.
π 6. Common Errors & Pitfalls (Lessons Learned)
β Error 1: Classifying a UK Mains Plug (BS 1363) as a Coaxial Connector (8536.69.40.10)
π Consequence: Customs may reject as "incorrect description." Coaxial is for signals, not power.
β Error 2: Classifying a UK Mains Plug as a Cylindrical Multicontact Connector (8536.69.40.20)
π Consequence: Although the rate is the same (25%), the description is inaccurate. "Cylindrical" implies a round shape. UK plugs are rectangular. This can lead to detention for inspection.
β Error 3: Not declaring the Fuse inside the UK plug
π Consequence: UK plugs are unique for containing a fuse. If not declared, customs may suspect it's not a standard plug.
β Correct Declaration Example:
"Electrical Plug, Type G (BS 1363), 13A, 250V AC, with Fuse, for Mains Power Connection, Plastic Body, Copper Contacts."
π― 7. Conclusion: Professional Declaration Saves Money!
π― Remember:
πΉ "UK Plug is Rectangular, Not Cylindrical!"
πΉ "Coaxial is for Signals, Not Power!"
πΉ "Check HS Code Before Shipping!"
π Tip:
If you are importing standard UK plugs, do NOT use the HS codes from <DATA> (8536.69.40.10/20). Use the general 8536.69.00.00 or your local equivalent. The <DATA> provided is for specialized connectors, not standard power plugs.
π£ Act Now:
π Consult a customs broker to confirm the correct HS Code for BS 1363 Plugs.
π Avoid the 25% Additional Tariff by using the correct general classification.
β¨ Professional Clearance, Start with Accurate Classification!
πΌ Every Penny Saved is a Penny Earned!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.