ventilation plastic pipe fitting
CN β US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3917400050 | 40.3% | CN | US | Official Doc |
| 3917400095 | 40.3% | CN | US | Official Doc |
| 3926909987 | 22.8% | CN | US | Official Doc |
| 3926305000 | 22.8% | CN | US | Official Doc |
Product Images
AI Analysis
π Ventilation Plastic Pipe Fitting
π HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Transit Strategy
π I. Product Definition and Classification: Do You Really Understand "Ventilation Plastic Fittings"?
Plastic pipe fittings are the essential connectors for fluid transport systems. In international trade, "Ventilation Plastic Pipe Fitting" (typically referring to Drain, Waste, and Vent - DWV systems) is strictly distinguished from pressurized plumbing or electrical conduit based on its pressure rating and specific function.
The key to accurate classification lies in answering two questions: 1. Is it rated for pressure? If it is for standard gravity-fed drainage (DWV), it falls under specific subheadings. 2. Is it for electrical conduit? If it is a rigid tube designed specifically to protect electrical wires, it is classified as an article of plastics for electrical use.
β οΈ Key Distinction Point:
- If the fitting is NOT pressure-rated and used for Drain/Waste/Vent (DWV) systems β It is classified under 3917.40.00.50.
- If it is a Rigid tube/pipe suitable for use as electrical conduit β It is classified under 3926.90.99.87.
- Note: Other general plastic fittings (non-plumbing, non-electrical) may fall under 3917.40.00.95 or 3926.30.50.00 depending on exact end-use.
π¦ II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
Based on the provided data, here are the precise HS Code mappings for "Ventilation Plastic Pipe Fitting":
| HS Code | Product Description | Applicable Scenario | Key Identifier |
|---|---|---|---|
3917.40.00.50 |
Fittings Plumbing fittings, not pressure rated (Drain/Waste/Vent (DWV)): Other | Standard household DWV systems, gravity-fed waste pipes, sewage vents | β No Pressure Rating; Used for Vent/DWV |
3917.40.00.95 |
Fittings Other | General plastic pipe fittings not covered by other specific plumbing or electrical categories | β Generic Plastic Fitting |
3926.90.99.87 |
Other Rigid tubes or pipe suitable for use as electrical conduit | Rigid plastic pipes/fittings used exclusively to protect electrical wiring | β Electrical Conduit Use |
3926.30.50.00 |
Fittings for furniture, coachwork or the like: Other | Plastic parts used as handles, joints, or fittings for furniture or vehicle bodies | β Not for Piping Systems |
π Focus for "Ventilation Pipe Fitting":
The most accurate code for a standard ventilation/drainage plastic fitting (like a 90-degree elbow, tee, or coupling for PVC DWV pipes) is 3917.40.00.50.
If the product is a rigid pipe/fitting meant for electrical wiring protection, it is 3926.90.99.87.
π° III. 2026 Latest Tariff Rate Details (Including Additional Taxes, Policy Add-ons)
β Applicable Country: United States (US)
β Country of Origin: China (CN)
β Effective Time: Current Rates (as per provided data)
π― 1. 3917.40.00.50 ββ Plumbing Fittings, Not Pressure Rated (DWV/Vent)
| Item | Content |
|---|---|
| Base Tariff | 0.0% (ad valorem) |
| USITC Additional Tariff | 0.0% |
| IEEPA Additional Tariff | 0.0% |
| Total Tax Rate | 0.0% |
| Tax Calculation | CIF Value Γ 0.0% = $0 Duty |
| De Minimis Eligibility | β Yes (Typically eligible for Section 321 de minimis if <$800, subject to current CBP enforcement) |
| Legal Basis Path | HTSUS:3917.40.00.50 β Base: 0% β Section 301: Not Listed β IEEPA: Not Listed |
π Interpretation:
- This is a highly favorable tariff code.
- Standard DWV plumbing fittings made of plastic enjoy zero duty in the US market.
- This applies to PVC, ABS, or PP-R fittings used in gravity-fed waste and vent systems.
π― 2. 3917.40.00.95 ββ Other Fittings (General Plastic)
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| USITC Additional Tariff | 0.0% |
| IEEPA Additional Tariff | 0.0% |
| Total Tax Rate | 0.0% |
| Tax Calculation | CIF Value Γ 0.0% = $0 Duty |
| De Minimis Eligibility | β Yes |
| Legal Basis Path | HTSUS:3917.40.00.95 |
π Interpretation:
- Also 0% tax.
- Use this code if the fitting does not strictly meet the "Plumbing/Faucet" definition but is still a general plastic pipe fitting.
π¨ 3. 3926.90.99.87 ββ Rigid Tubes/Pipes for Electrical Conduit
| Item | Content |
|---|---|
| Base Tariff | 5.3% |
| USITC Additional Tariff | 7.5% |
| IEEPA Additional Tariff | Included in 7.5% (See note) |
| Total Tax Rate | 12.8% |
| Tax Calculation | CIF Value Γ 12.8% |
| De Minimis Eligibility | β No (Likely denied due to Section 301/IEEPA listing for general plastics/electrical goods from China) |
| Legal Basis Path | HTSUS:3926.90.99.87 β Base: 5.3% β Add-on: 7.5% |
π Interpretation:
- β οΈ CRITICAL WARNING: If your "ventilation" fitting is actually a rigid pipe used for electrical conduit, the tariff jumps to 12.8%.
- The "7.5%" is likely a combined effect of Section 301 and IEEPA add-ons on certain plastic articles.
- Do not misclassify a DWV fitting as electrical conduit to save time; this will result in incorrect declaration and potential penalties.
π― 4. 3926.30.50.00 ββ Fittings for Furniture/Cowork
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Total Tax Rate | 0.0% |
| Note | β Not Applicable for Pipe Fittings. Do not use unless the product is actually a furniture joint. |
π οΈ IV. Customs Clearance Practical Advice (Battle-Tested Pitfall Guide)
β 1. Document Checklist (Non-negotiable)
| Document | Required | Explanation |
|---|---|---|
| β Product Specification Sheet | βοΈ | Must explicitly state: "Not for pressure use," "DWV System," "Gravity-fed only." |
| β Material Certificates | βοΈ | PVC, ABS, or PP material specs. |
| β Product Photos | βοΈ | Clear view of the fitting, thread type, and connection method. |
| β Commercial Invoice | βοΈ | Description must include "Plastic Pipe Fitting for Drain/Waste/Vent (DWV), Not Pressure Rated." |
| β HS Code Declaration | βοΈ | Explicitly cite 3917.40.00.50. |
β 2. Declaration Tips (Key Mnemonics)
π₯ "No Pressure, No Problem; Drain and Vent, Zero Tax Done!"
| Scenario | Correct Declaration | Wrong Practice |
|---|---|---|
| Standard DWV Elbow/Tee | 3917.40.00.50 |
Misclassifying as electrical conduit (3926...) β 12.8% Tax |
| Pressurized PVC Pipe Fitting | 3917.40.00.10 (Not in data, but distinct) |
Using 3917.40.00.50 β Misdeclaration (DWV code is for non-pressure) |
| Electrical Conduit Pipe | 3926.90.99.87 |
Using 3917.40.00.50 β Risk of Audit/Fine |
| Furniture Joint | 3926.30.50.00 |
N/A (Not applicable to pipe fittings) |
π Critical Note:
- Ensure the invoice states "NOT FOR PRESSURE USE". This is the key phrase that justifies the 0% tax rate under 3917.40.00.50.
- If the fitting is tested for pressure (e.g., 100 PSI), it cannot be classified as DWV. It must be classified as pressure plumbing, which may have different rates (not in current data, but generally higher or subject to different regulations).
β 3. Special Case Handling
| Situation | Handling Advice |
|---|---|
| Mixed Containers | Separate DWV fittings (0%) from electrical conduit (12.8%) in documentation. Mixed HS codes in one line item can cause delays. |
| Custom/Unique Shapes | Provide detailed diagrams. If it doesn't look like a standard pipe joint, customs may inspect. Ensure description says "Plastic Fitting." |
| Origin Proof | Even with 0% tax, CBP may still require proof of origin to rule out anti-dumping duties (though unlikely for standard DWV plastic). Keep invoices and supplier declarations ready. |
π V. Global Market Clearance Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff | Certification | Note |
|---|---|---|---|---|
| πΊπΈ USA | 3917.40.00.50 |
0.0% | N/A (Standard) | Best for DWV; 12.8% if misclassified as electrical |
| π¨π³ China | 3917.40.00.50 |
~3-5% | CCC (if applicable) | Export rebate may apply |
| πͺπΊ EU | 3917.21 or 3917.29 |
~0-3% | CE/REACH | Different 8-digit code structure |
| π¬π§ UK | 3917.21 |
~0-5% | UKCA | Post-Brexit rules apply |
| π¦πΊ Australia | 3917.21 |
~5% | RCM | No special anti-dumping for PVC DWV |
π Conclusion:
- The US market is the most favorable for these goods with 0% tariff under the correct code.
- Misclassification as electrical conduit is the biggest risk, leading to a 12.8% unexpected cost.
π VI. Common Mistakes & Pitfall Guide (Blood Lessons)
β Mistake 1: Calling the product "Plumbing Fitting" without specifying "DWV" or "Non-Pressure"
π Consequence: Customs may assume it is pressure-rated, leading to reclassification and potential additional duties or regulatory reviews.
β Mistake 2: Using 3926.90.99.87 (Electrical Conduit) for standard drain pipes
π Consequence: Overpaying 12.8% tariff unnecessarily.
β Mistake 3: Mixing "Pressure Rated" and "Non-Pressure Rated" fittings in one declaration
π Consequence: Customs will separate them. If the pressure-rated one has a higher tax, you pay it. If not declared correctly, penalties apply.
β Mistake 4: Omitting "Material" (PVC/ABS) in description
π Consequence: Customs may hold the shipment for classification verification, causing delays.
β Correct Description Example:
"PVC Plastic Pipe Fitting, 90-Degree Elbow, 4-inch, for Drain/Waste/Vent (DWV) System, Not Pressure Rated, Model DWV-490, HS 3917.40.00.50"
π― VII. Conclusion: Precise Classification, Maximum Savings!
π― Remember the Mantra:
πΉ "DWV Non-Pressure = 0% Tax"
πΉ "Electrical Conduit = 12.8% Tax"
πΉ "Specify 'No Pressure' on Invoice to Keep it Zero!"
π Pro Tip:
If your fittings are made in Vietnam, Mexico, or Thailand, check for FTA benefits (USMCA, etc.), but note that the US currently applies 0% tariff to Chinese-made DWV plastic fittings anyway. The real cost saver is avoiding the 12.8% electrical conduit trap.
π£ Immediate Action:
π Consult your customs broker with the exact description: "PVC DWV Fitting, Non-Pressure."
π Ensure your Commercial Invoice matches this description precisely.
π‘ Save money by declaring correctly from day one!
β¨ Professional Clearance Starts with Accurate Classification!
πΌ Your Profit Margin Depends on the Right HS Code!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) β Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) β More specific grouping within the chapter
- Subheading (6 digits) β Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) β Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate β The standard duty rate applied to WTO members
- General rate β Applied to countries without trade agreements
- Trade remedy duties β Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.