不锈钢罐子
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 7323930080 | 62.0% | CN | US | Official Doc |
| 7323930060 | 62.0% | CN | US | Official Doc |
| 7310290055 | 85.0% | CN | US | Official Doc |
| 7310290065 | 85.0% | CN | US | Official Doc |
| 7326908688 | 87.9% | CN | US | Official Doc |
| 7326908610 | 87.9% | CN | US | Official Doc |
Product Images
AI Analysis
🏭 Stainless Steel Keags & Containers (Stainless Steel Casks)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Tariff Breakdown | Strategic Clearance Strategy
📌 I. Product Definition & Classification: Do You Know Your "Stainless Steel Kegs"?
Stainless Steel Containers are essential for the storage, transport, and dispensing of liquids (beer, wine, oil, chemicals) and dry goods. In international trade, they are strictly categorized by capacity and intended use (household vs. industrial/refillable).
Key Distinctions: * Refillable Stainless Steel Kegs: Specifically designed for beer/wine, pressurized or unpressurized, reusable. → HS Code 7310.29.00.55 * General Storage Containers (<50 Liters): Cans, boxes, small drums for liquids not gas, non-pressurized. → HS Code 7310.29.00.65 * Kitchen/Household Items: Stainless steel pots, scouring pads, or general household ware. → HS Code 7323.93.00.xx * Other General Iron/Steel Articles: Non-specific items, often categorized under "Other". → HS Code 7326.90.86.xx
⚠️ Critical Classification Point:
- If the item is a Refillable Keg (even if unpressurized) used for beverages → 7310.29.00.55 (0% Base Tax).
- If it is a General Container (<50L) for food/chemicals but NOT a refillable keg → 7310.29.00.65 (0% Base Tax).
- If it is Kitchen Ware (pots, pans, kitchen tools) → 7323.93.00.80 / 7323.93.00.60 (2% Base Tax).
- If it is a miscellaneous steel article not fitting other categories → 7326.90.86.88 / 7326.90.86.10 (2.9% Base Tax).
📦 II. HS Code Classification Details (2026 Latest Tariff Data)
| HS Code | Product Description | Scenario | Capacity/Type |
|---|---|---|---|
7310.29.00.55 |
Refillable Stainless Steel Kegs (Pressurized or unpressurized) | Beer/Wine kegs, industrial refillable tanks <50L | < 50 Liters |
7310.29.00.65 |
Other Containers (Cans, drums, boxes) | General liquid storage, chemical tanks, non-refillable <50L | < 50 Liters |
7323.93.00.80 |
Household/Kitchen Articles (Other) | Stainless steel pots, cutlery, kitchen parts (non-cooking specific) | Household Use |
7323.93.00.60 |
Kitchen Ware | Cooking pots, kettles, pans, kitchen utensils | Cooking/Kitchen |
7326.90.86.88 |
Other Iron/Steel Articles | Miscellaneous steel items, parts not elsewhere specified | General |
7326.90.86.10 |
Laminated Goods | Steel sheets held by adhesive or non-metallic core | Laminated/Composite |
🔍 Key Reminder:
- Kegs vs. Cans: The term "Keg" implies reusability and often a specific shape/fitting for tapping. If it's a standard "tin can" style stainless container, it falls under7310.29.00.65.
- Kitchen Ware: If the item is clearly a pot or pan, use 7323 codes. If it's a storage tank, use 7310.
- Laminated Goods: Only use 7326.90.86.10 if the item consists of two or more flat-rolled sheets held by adhesive or a non-metallic core.
💰 III. 2026 Tariff Rate Breakdown (Including Surcharges & Policy Add-ons)
✅ Applicable Market: USA (United States)
✅ Origin: China (CN)
✅ Effective Date: 2025+ (Includes Section 232 & Section 301 measures)
🎯 1. 7310.29.00.55 & 7310.29.00.65 (Containers < 50 Liters)
The most common classification for industrial kegs and storage cans.
| Item | Content |
|---|---|
| Base Tariff | 0.0% (Free of charge for most containers) |
| Section 232 Surcharge | +50% (Steel/Aluminum/Copper Products Tariff) |
| Section 301 Surcharge | +25% (China-Specific Steel Tariff) |
| Total Effective Tax | 75.0% |
| Tax Calculation | CIF Value × 75% |
| De Minimis Exemption | ❌ NO (Strictly denied for steel containers) |
| Legal Path | 232:Steel (50%) + 301:Steel (25%) |
📌 Explanation:
- Although the base tariff is 0%, the Steel Tariff (50%) and Section 301 (25%) make this the highest cost category for general containers.
- Total 75% applies whether it is a refillable keg (55) or a general can (65).
- Critical: This is NOT exempt from the 25% China tariff because it is a steel product.
🎯 2. 7323.93.00.80 & 7323.93.00.60 (Kitchen/Household Stainless Steel)
Pots, pans, and household utensils.
| Item | Content |
|---|---|
| Base Tariff | 2.0% |
| Section 232 Surcharge | +50% (Steel/Aluminum/Copper Products Tariff) |
| Section 301 Surcharge | 0.0% (Note: Kitchenware often exempt from the 25% China steel surcharge if classified correctly, but check latest updates) |
| Total Effective Tax | 52.0% |
| Tax Calculation | CIF Value × 52% |
| De Minimis Exemption | ❌ NO |
| Legal Path | 232:Steel (50%) + Base (2%) |
📌 Explanation:
- These items still attract the 50% Section 232 Steel tariff because they are stainless steel.
- However, they typically avoid the 25% Section 301 surcharge (Total 52% vs 75%), making them cheaper to import than industrial kegs.
- Key Advantage: A stainless steel pot (52%) is significantly cheaper to import than a stainless steel tank (75%).
🎯 3. 7326.90.86.88 & 7326.90.86.10 (Other Articles / Laminated)
General steel articles or laminated steel sheets.
| Item | Content |
|---|---|
| Base Tariff | 2.9% |
| Section 232 Surcharge | +50% (Steel/Aluminum/Copper Products Tariff) |
| Section 301 Surcharge | +25% (China-Specific Steel Tariff) |
| Total Effective Tax | 77.9% |
| Tax Calculation | CIF Value × 77.9% |
| De Minimis Exemption | ❌ NO |
| Legal Path | 232:Steel (50%) + 301:Steel (25%) + Base (2.9%) |
📌 Explanation:
- This is the most expensive category (77.9%).
- Only use if the item is a generic "other article" that doesn't fit Kegs (7310) or Kitchen Ware (7323).
- Laminated goods (7326.90.86.10) specifically must have an adhesive or non-metallic core to qualify for this code.
🛠️ IV. Customs Clearance Practical Advice (Avoiding Pitfalls)
✅ 1. Documentation Checklist (Must Have)
| Document | Required? | Purpose |
|---|---|---|
| Product Specification Sheet | ✅ | Defines capacity (<50L?), pressure rating (for kegs), material grade (304/316). |
| Commercial Invoice | ✅ | Must explicitly state "Stainless Steel Kegs" or "Kitchen Ware" to avoid "Other" classification. |
| Material Certificate | ✅ | Proves 100% stainless steel to trigger (or avoid) Section 232 rules. |
| Technical Drawing | ✅ | Crucial for determining if it's a "Keg" (reusable) vs. "Can" (disposable/general). |
| Usage Statement | ✅ | Confirming if for beverage dispensing (Keg) or general storage (Tank). |
✅ 2. Classification Strategy (The Golden Rules)
🔥 Mantra: "Kegs are 75%, Pots are 52%, 'Other' is 77.9%!"
| Scenario | Correct HS Code | Tax Rate | Risk if Wrong |
|---|---|---|---|
| Refillable Beer Keg (<50L) | 7310.29.00.55 |
75% | ✅ Correct |
| Small Stainless Storage Can (<50L) | 7310.29.00.65 |
75% | ❌ Don't use 7323 (Kitchen) |
| Stainless Pot / Pan | 7323.93.00.60 |
52% | ✅ Best for lower tax! |
| General Steel Tool/Part | 7326.90.86.88 |
77.9% | ❌ Avoid if possible |
| Laminated Steel Sheet | 7326.90.86.10 |
77.9% | Only if adhesive core exists |
⚠️ Warning:
- Do NOT classify a stainless steel pot as a "General Container" (7310). It will be reclassified and taxed at 75% or 77.9% + potential penalties.
- Do NOT classify a Keg as "Kitchen Ware" (7323). Keags are for industrial/transport, not cooking.
✅ 3. Special Handling Scenarios
| Scenario | Action |
|---|---|
| Pressurized vs. Unpressurized | If the keg is pressurized, it must still fit 7310.29.00.55. If it's for compressed gas, it belongs to a completely different chapter (Chapter 73.10 excludes gas). |
| Capacity > 50 Liters | If the container is over 50L, it does NOT fit the codes listed above. It moves to a different subheading (likely 7310.29 higher capacity or 7310.90). Re-check tariff! |
| Laminated Goods | If your "Stainless Steel Tank" has a non-metallic core (e.g., insulated with foam), declare it as Laminated Goods (7326.90.86.10) if the structure matches, but expect the 77.9% tax. |
🌍 V. Global Market Comparison (2026)
| Market | Recommended HS Code | Base Tax | Steel Surcharge | Total Tax (China Origin) |
|---|---|---|---|---|
| 🇺🇸 USA | 7310.29.00.55 (Keg) |
0% | +75% (50+25) | 75.0% |
| 🇺🇸 USA | 7323.93.00.60 (Pot) |
2% | +50% | 52.0% |
| 🇪🇺 EU | 7310.29.00.55 |
2.4% | 0% (No Sec 232) | ~2.4% |
| 🇨🇳 China | 7310.29.00.55 |
5% | 0% | 5.0% |
| 🇦🇺 Australia | 7310.29.00.55 |
5% | 0% | 5.0% |
📌 Conclusion:
- USA is the most expensive market due to the dual-layer steel surcharge (75%).
- Kitchen Ware (7323) is your best bet in the US to lower costs to 52%.
- Kegs and Tanks (7310) will always hit the 75% mark in the US.
📌 VI. Common Mistakes & Pitfalls
❌ Mistake 1: Calling a "Stainless Steel Tank" a "Kitchen Pot" to get 52% tax.
👉 Result: Customs will reject, reclassify to 75% + 10% penalty.
❌ Mistake 2: Missing the Capacity Limit.
👉 Result: If the tank is 60 liters, it doesn't fit 7310.29.00.xx. It will be misclassified, leading to delays.
❌ Mistake 3: Ignoring the "Pressurized" distinction.
👉 Result: If it's for compressed gas, it belongs to 7311 or 7310 (different subhead), not the standard liquid kegs.
❌ Mistake 4: Assuming "Other" (7326) is cheaper.
👉 Result: 7326.90.86.88 has a 77.9% tax rate. Avoid if possible.
🎯 VII. Final Strategy: Save Money & Clear Fast!
🎯 Action Plan: 1. Audit your Product: Is it a Keg (<50L)? → Expect 75%. 2. Optimize Design: If it can be a Pot/Kitchen Ware, shift design to 7323 → 52% (Save 23%!). 3. Check Capacity: Ensure it is <50 Liters. If >50L, the tax rate may change entirely. 4. Declare Accurately: Use terms like "Stainless Steel Refillable Keg" or "Kitchen Pot" to match the HS Code description.
🔹 Pro Tip: For Kegs, ensure the "Refillable" nature is documented in your spec sheet. If you declare them as "Disposable," you might still face the same 75% rate, but documentation helps prove the "Keg" classification over "Can".
✨ Professional Clearance Starts with Accurate Classification!
💼 Every percentage point counts. 75% vs 52% can change your profit margin!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.