伞形针叶木
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 4417008090 | 40.1% | CN | US | Official Doc |
| 4417008010 | 40.1% | CN | US | Official Doc |
| 4410900000 | 35.0% | CN | US | Official Doc |
AI Analysis
☂️ Umbrella Pine Wood (Araucaria heterophylla)
Harmonized System (HS) Classification & Customs Clearance Strategy | 2026 Latest Tariff Analysis
🌐 HS Code Reference & Clearance Guide | 2026 Latest Tariff Analysis | Professional Customs Strategy
📌 I. Product Definition & Classification: Do You Truly Understand "Umbrella Pine Wood"?
Umbrella Pine (Araucaria heterophylla), often referred to as Norfolk Island Pine wood, is a distinct type of softwood known for its straight grain, fine texture, and high strength-to-weight ratio. It is widely used in construction, furniture, and specialized carpentry.
In international trade, the classification depends entirely on the specific end-use of the wooden product. Since "Umbrella Pine Wood" is a raw material or semi-finished product, it can fall into different categories based on whether it is processed into handles, boards, or remains as other wooden articles.
⚠️ Key Distinction Points: - If the wood is processed into handles for tools (hammers, axes, brooms), it falls under Chapter 44.17. - If the wood is processed into particle board, OSB, or similar agglomerated boards, it falls under Chapter 44.10. - If the wood is used for other specific wooden tools or articles not covered by the above, it falls under the "Other" category of Chapter 44.17.
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
Based on the provided data, here are the applicable HS Codes and their descriptions:
| HS Code | Product Description | Applicable Scenario | Primary Use |
|---|---|---|---|
4417.00.80.90 |
Tools, tool bodies, tool handles, broom/brush bodies and handles, of wood: Other | General wooden articles, specialized wooden parts not specifically listed as handles or tool bodies | Fallback Category: Used when the specific intended use (e.g., handle) is not explicitly defined in the product description. |
4417.00.80.10 |
Tools, tool bodies, tool handles, broom/brush bodies and handles, of wood: Other Tool Handles | Wooden handles for hammers, screwdrivers, brooms, brushes, etc. | Specific Use: If the product is clearly intended and designed to be a handle. |
4410.90.00.00 |
Particle board, oriented strand board (OSB) and similar board of wood: Other | Agglomerated wood products, chipboard, fiberboard made from Umbrella Pine | Processed Board: If the wood is processed into engineered wood panels. |
🔍 Key Reminder: -
4417.00.80.10is for specific tool handles. If the product is a handle, use this code. -4417.00.80.90is for other wooden articles (including tools that are not handles). This is the primary fallback if the specific use is not defined. -4410.90.00.00is for wooden boards (particle board, OSB). This applies only if the wood is processed into board form.
💰 III. 2026 Latest Tariff Rate Details (Including Surtaxes & Policy Add-ons)
✅ Applicable Country: United States (US) ✅ Origin: China (CN) ✅ Effective Date: From November 10, 2025 (and subsequent imports)
🎯 1. 4417.00.80.10 —— Tool Handles (Wooden)
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Additional Tariff | 0.0% |
| Total Tariff | 0.0% |
| Tax Calculation | CIF Value × 0% = $0 |
| De Minimis Exemption | ✅ Yes (If value is below $800) |
| Legal Basis | No Section 301 or IEEPA surtax applies to this specific subheading for Chinese origin. |
📌 Explanation: - Wooden tool handles (
4417.00.80.10) are exempt from the 25% Section 301 tariff and the 10% IEEPA surtax. - Total Duty: 0%. This is a highly favorable classification for cost-saving.
🎯 2. 4417.00.80.90 —— Other Wooden Tools/Articles (Umbrella Pine)
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Additional Tariff | 0.0% |
| Total Tariff | 0.0% |
| Tax Calculation | CIF Value × 0% = $0 |
| De Minimis Exemption | ✅ Yes (If value is below $800) |
| Legal Basis | No Section 301 or IEEPA surtax applies to this specific subheading for Chinese origin. |
📌 Explanation: - The "Other" category within Chapter 44.17 for wooden tools/articles (
4417.00.80.90) is also exempt from additional surtaxes. - Total Duty: 0%. This makes it competitive for general wooden articles.
🎯 3. 4410.90.00.00 —— Other Particle Board/OSB (Wooden)
| Item | Content |
|---|---|
| Base Tariff | 0.0% |
| Additional Tariff | +25.0% |
| Total Tariff | 25.0% |
| Tax Calculation | CIF Value × 25% |
| De Minimis Exemption | ❌ No (Deny De Minimis) |
| Legal Basis | USITC:4410.90.00.00 → FOOTNOTE:9903.88.01 (Section 301) |
📌 Explanation: - Particle board, OSB, and similar agglomerated boards (
4410.90.00.00) are subject to the 25% Section 301 tariff. - Total Duty: 25%. This is a significant cost increase compared to tool handles. - Note: The IEEPA 10% surtax does not apply to this HS code in the provided data, only the 25% USITC surtax.
🛠️ IV. Customs Clearance Practical Advice (Real-World Pitfall Guide)
✅ 1. Preparation Checklist (Missing Documents Can Cause Delays)
| Document | Required? | Description |
|---|---|---|
| ✅ Product Specification | ✔️ | Must clearly state: Material (Araucaria heterophylla), Form (Handle, Board, Other), Use. |
| ✅ Product Photos | ✔️ | Show the item from multiple angles. Clearly identify if it is a handle, board, or other article. |
| ✅ Commercial Invoice | ✔️ | Must match the HS Code declared. Use precise English descriptions. |
| ✅ Packing List | ✔️ | Detail weight, dimensions, and packaging type. |
| ✅ Certificate of Origin | ✔️ | Essential for proving Chinese origin (though tariffs are 0% or 25%, proof is needed). |
| ✅ Fumigation Certificate | ✔️ | Required for all wooden products to prevent pest infestation (IPPC stamp). |
✅ 2. Declaration Tips (Key Mantras)
🔥 “Describe Use, Declare HS, Avoid Ambiguity!”
| Scenario | Correct Declaration | Wrong Practice |
|---|---|---|
| Wooden Handle | 4417.00.80.10 - "Wooden Hammer Handle, Umbrella Pine" |
Vague: "Wooden Item" → Risk of misclassification |
| General Wooden Tool | 4417.00.80.90 - "Wooden Tool Body, Umbrella Pine" |
Vague: "Wooden Product" → May trigger 25% if misread as board |
| Wooden Board | 4410.90.00.00 - "Particle Board, Umbrella Pine, 18mm" |
Vague: "Wood Panel" → Risk of delay for inspection |
| Mixed Shipment | Split HS Codes if handles and boards are in same container | Mixed declaration → High audit risk |
✅ 3. Special Case Handling
| Situation | Handling Advice |
|---|---|
| OEM Custom Handles | Provide design drawings or samples to prove it is a "handle" (HS 4417.00.80.10, 0% tariff). |
| Raw Logs/Planks | If not processed into handles or boards, they may fall under 44.07 (Sawn Wood) or 44.17.80.90. Check if 0% applies. |
| Agglomerated Wood | If the product is pressed wood (not solid wood), it is 4410.90.00.00 (25% tariff). Do not declare as solid wood. |
| Fumigation | Ensure the wood is heat-treated or fumigated and has the IPPC mark. Non-compliance leads to rejection or re-export. |
🌍 V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff Rate (China Origin) | Certification Required | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 4417.00.80.10 / 4417.00.80.90 |
0% | IPPC, Fumigation | Handles/Tools are exempt from 301 tariffs. |
| 🇺🇸 USA | 4410.90.00.00 |
25% | IPPC, Fumigation | Particle board/OSB is taxed. |
| 🇨🇳 China | 4417.00.80.10 |
Varies | CCC (if applicable) | Internal trade rates apply. |
| 🇪🇺 EU | 4417.00.80.90 |
0% (Most Favored Nation) | FSC/PEFC (Preferred) | EU has low tariffs for wooden tools. |
| 🇬🇧 UK | 4417.00.80.90 |
0% | Fumigation | Post-Brexit tariff may vary, check latest UK Tariff. |
📌 Conclusion: - Umbrella Pine Wood in the US is highly tariff-friendly if used as tools/handles (0%). - If processed into particle board, the 25% surtax applies. - Always declare the specific use to ensure the correct HS Code and avoid unnecessary duties.
📌 VI. Common Errors & Pitfall Guide (Lessons Learned)
❌ Error 1: Declaring Particle Board as "Wooden Tool" 👉 Consequence: Tax rate jumps from 0% to 25%. Back taxes + Penalties!
❌ Error 2: Declaring Tool Handles as "Wooden Parts" (Vague)
👉 Consequence: Customs may inspect and misclassify as 4417.00.80.90 (still 0% in this data) or worse, if misinterpreted as other goods. Clarify the use.
❌ Error 3: Missing IPPC Fumigation Mark 👉 Consequence: Shipment rejected or destroyed at US port. 100% loss of goods!
❌ Error 4: Using "Umbrella Pine" without specifying Form
👉 Consequence: Customs cannot determine if it is solid wood (44.07/44.17) or agglomerated (44.10). Delay in clearance.
✅ Correct Approach:
"Umbrella Pine Wooden Hammer Handle, Heat-Treated, IPPC Certified, Model XYZ, 10cm Length"
🎯 VII. Conclusion: Professional Declaration, Cost Savings, Efficiency!
🎯 Remember the Mantra:
🔹 "Handles & Tools: 0% Duty; Boards: 25% Duty!"
🔹 "Declare Use Clearly, Avoid Ambiguity, Save Thousands!"
🔹 "Fumigation is Mandatory, No Mark, No Entry!"
📌 Tip: If your product is solid wood and used as a handle or tool part, it enjoys 0% tariff in the US. If it is particle board or OSB, it incurs 25% tariff. Always verify the physical form before declaration.
📣 Immediate Action:
📞 Contact a professional customs broker + Provide product photos + Apply for HS Code Advance Ruling (if unsure)
🚀 Ensure Umbrella Pine Wood products clear customs smoothly, reduce costs, and maximize profits!
✨ Professional Clearance Starts with Accurate Classification!
💼 Every dollar of duty is worth calculating precisely!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.