保险杠唇
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 8714100050 | 17.5% | CN | US | Official Doc |
| 8714998000 | 27.5% | CN | US | Official Doc |
| 8708106050 | 87.5% | CN | US | Official Doc |
| 8708106010 | 87.5% | CN | US | Official Doc |
| 3926305000 | 22.8% | CN | US | Official Doc |
Product Images
AI Analysis
🚗 Bumper Lip (Vehicle Appearance Decoration Parts)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Customs Strategy
📌 I. Product Definition & Classification: Do You Really Understand "Bumper Lip"?
A Bumper Lip (also known as a front splitter, chin spoiler, or bumper appendage) is a critical aesthetic and aerodynamic component for vehicles. In international trade, its classification depends heavily on material, function, and specific composition.
The provided data highlights a significant divergence in tariff rates based on how this item is categorized—ranging from 27.5% to a staggering 87.5%. Understanding the nuance is vital for cost control.
⚠️ Key Distinction:
- If it is primarily an aesthetic decoration made of plastic/metal and not a structural part of the bumper assembly itself → Likely 8714.99.80.00.
- If it is considered a constituent part of the bumper (especially if steel, aluminum, or copper) → Likely 8708.10.60.10/50.
- If it is a generic plastic accessory/connection piece → Likely 3926.30.50.00 or 3926.90.99.89.
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Applicable Scenario | Material/Structure |
|---|---|---|---|
8714.99.80.00 |
Vehicle appearance decoration parts (bumper lip), fits the purpose of vehicle parts and accessories, material is plastic or metal. | Aesthetic lip/splitter, non-structural attachment. | Plastic or Metal (General) |
8708.10.60.50 |
Constituent parts of bumpers, belonging to bumpers and their parts, non-stamped, fits the fallback principle of other categories. | Bumper components, non-structural, general fallback. | General (High Tax applies) |
8708.10.60.10 |
Constituent parts of automotive bumpers, usage consistent with automotive bumpers and their parts, fits the spare parts classification logic. | Integrated bumper parts, logical spare parts classification. | Steel, Aluminum, Copper (Metal) |
3926.30.50.00 |
Body connection/decoration parts, belongs to auto spare parts, default material is plastic, fits plastic product definition. | Plastic body clips, connectors, or decorative trim. | Plastic |
3926.90.99.89 |
Other plastic articles, material is plastic, form is auto spare part, fits fallback classification for other articles. | Generic plastic auto parts, no specific sub-heading fits. | Plastic |
🔍 Key Reminder:
- Metal Bumper Parts (Steel/Alu/Cu): Falls under 8708.10.60.10/50 with a total tax of 87.5%. This is the most expensive option. - Plastic/Metal Aesthetic Parts: Falls under 8714.99.80.00 with a total tax of 27.5%. This is the most cost-effective option for non-structural items. - Plastic Accessories: Falls under 3926 series with a total tax of 22.8%.
💰 III. 2026 Latest Tariff Rate Detailed Breakdown (Including Surtaxes & Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: Including imports from 2025 onwards
🎯 1. 8714.99.80.00 —— Vehicle Appearance Decoration Parts (Best Value Option)
| Item | Content |
|---|---|
| Base Tariff | 10.0% |
| Section 301 Surtax | 7.5% |
| Section 122 Surtax | 10.0% |
| Total Tax Rate | 27.5% |
| Calculation | CIF Value × 27.5% |
| De Minimis Exemption | ❌ Not Applicable (Likely denied due to surtaxes) |
| Legal Basis Path | Standard Auto Parts Classification + Trade Remedies |
📌 Explanation:
- This code is used for aesthetic bumper lips (e.g., fiberglass, ABS plastic, or non-structural metal trims) that are not strictly considered a "part of the bumper assembly" but rather "appearance decoration." - 27.5% is significantly lower than the 87.5% for structural metal parts.
🎯 2. 8708.10.60.10 & 8708.10.60.50 —— Bumper Constituent Parts (High Cost Warning)
| Item | Content |
|---|---|
| Base Tariff | 2.5% |
| Section 301 Surtax | 25.0% |
| Section 122 Surtax | 10.0% |
| Steel/Aluminum/Copper Surtax | 50.0% (Specific to these metals) |
| Total Tax Rate | 87.5% |
| Calculation | CIF Value × 87.5% |
| De Minimis Exemption | ❌ Not Applicable |
| Legal Basis Path | USITC:8708.10.60.10 → Section 301: 25% → Section 122: 10% → Metal Surtax: 50% |
📌 Critical Warning:
- If your bumper lip is made of Steel, Aluminum, or Copper and is classified as a "constituent part" of the bumper, you face a 87.5% tax rate. - The 50% surtax on steel/aluminum/copper is the primary driver of this high cost. - Strategy: If possible, avoid classifying simple aesthetic lips as "structural bumper parts" to avoid this bracket.
🎯 3. 3926.30.50.00 & 3926.90.99.89 —— Plastic Other Products (Medium Cost Option)
| Item | Content |
|---|---|
| Base Tariff | 5.3% |
| Section 301 Surtax | 7.5% |
| Section 122 Surtax | 10.0% |
| Total Tax Rate | 22.8% |
| Calculation | CIF Value × 22.8% |
| De Minimis Exemption | ❌ Not Applicable |
| Legal Basis Path | USITC:3926.30.50.00 → Trade Remedies |
📌 Note:
- These codes apply to plastic body connection/decoration parts or generic plastic auto parts. - 22.8% is the lowest tax rate among all options, but it requires the item to be clearly defined as a plastic accessory or generic plastic article, not a core structural metal part.
🛠️ IV. Customs Clearance Practical Advice (Battle-Tested Pitfall Avoidance Guide)
✅ 1. Preparation Checklist (Missing items are not allowed)
| Document | Required | Description |
|---|---|---|
| ✅ Product Spec Sheet | ✔️ | Dimensions, material composition (e.g., ABS, PP, Aluminum Alloy), mounting method. |
| ✅ Product Photos | ✔️ | Clear shots of front, back, and mounting points. Must show it is a lip/spoiler, not a full bumper. |
| ✅ Commercial Invoice | ✔️ | Explicitly describe as "Plastic Bumper Lip Decoration" or "Aesthetic Trim," avoid "Structural Bumper Part" if aiming for lower tax. |
| ✅ Packing List | ✔️ | Detail weights and dimensions. |
| ✅ Material Declaration | ✔️ | Crucial for distinguishing between Plastic (22.8%/27.5%) and Metal (87.5%). |
✅ 2. Declaration Tips (Key Mantra)
🔥 "Material Matters, Function Defines, Description Precise!"
| Scenario | Correct Declaration Strategy | Wrong Approach |
|---|---|---|
| Plastic Aesthetic Lip | HS: 3926.30.50.00 or 8714.99.80.00 Desc: "ABS Plastic Bumper Lip Decoration" |
Call it "Bumper Part" → Risk of 87.5% |
| Metal (Alu/Steel) Lip | HS: 8714.99.80.00 (if aesthetic) Desc: "Aluminum Alloy Bumper Aesthetic Trim" |
Classify as 8708.10.60.10 → 87.5% Tax |
| Generic Plastic Clip/Bracket | HS: 3926.90.99.89 Desc: "Plastic Body Connector/Trim" |
Vague description "Auto Part" → Audit risk |
⚠️ Strategic Note:
- If your product is metal but primarily for appearance (not structural load-bearing), argue for 8714.99.80.00 (27.5%) rather than 8708.10.60.10 (87.5%).
- However, if it is a structural component of the bumper assembly, you may be forced into the 87.5% bracket.
✅ 3. Special Cases Handling
| Scenario | Handling Advice |
|---|---|
| Mixed Materials (Plastic + Metal Core) | Declare the primary material. If >50% plastic, try for 3926 codes. If metal core is dominant, prepare for higher taxes. |
| OEM Custom Parts | Provide blueprints showing it is an aftermarket aesthetic accessory, not a factory structural replacement. |
| Kit Includes Adhesives/Mounting Hardware | Declare the main product (Lip) and declare adhesives as "accessories" or bundle if value is minimal, but check de minimis rules. |
🌍 V. Global Main Market Customs Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tariff Rate (China Origin) | Notes |
|---|---|---|---|
| 🇺🇸 USA | 8714.99.80.00 |
27.5% | Avoid 8708 codes for aesthetic parts to save 60%+. |
| 🇺🇸 USA | 3926.30.50.00 |
22.8% | Best for pure plastic parts. |
| 🇨🇳 China | 8714.99.80.00 |
10% | Lower import duty, no Section 301/122. |
| 🇪🇺 EU | 8714.99.00 |
4.5% | No additional US-style surtaxes. |
| 🇲🇽 Mexico | 8714.99.90 |
0% (Under USMCA if compliant) | Check Rules of Origin. |
📌 Conclusion:
- US Market: Classification is critical. Aesthetic lips should aim for 8714 or 3926 to avoid the punitive 87.5% metal surtax. - Documentation: Must clearly distinguish between "Decoration/Aesthetic" and "Structural/Constituent Part."
📌 VI. Common Errors & Pitfall Avoidance (Blood & Tears Lessons)
❌ Error 1: Classifying a plastic bumper lip as 8708.10.60.10 (Bumper Part)
👉 Consequence: Even if plastic, if misclassified as a structural part under the wrong sub-heading, it may attract higher scrutiny or incorrect duty. Note: Data shows 8708 codes have 87.5% tax, likely due to metal surtax application logic in the provided data. Ensure material accuracy.
❌ Error 2: Describing a metal lip simply as "Bumper Part"
👉 Consequence: Automatically triggers the Steel/Aluminum/Copper 50% surtax + 25% Section 301 + 10% Section 122 = 87.5%.
👉 Fix: Emphasize "Aesthetic Trim" or "Appearance Decoration" to argue for 8714.99.80.00 (27.5%).
❌ Error 3: Ignoring the "Section 122" tariff
👉 Consequence: Forgetting to add the 10% surtax leads to underpayment and penalties. All codes in the provided data include this.
✅ Correct Declaration Example:
"Automotive Bumper Lip, Aesthetic Front Splitter, Material: ABS Plastic, For Aftermarket Appearance Enhancement, Model: XYZ, Not a Structural Bumper Component"
🎯 VII. Conclusion: Professional Classification Saves Money!
🎯 Remember the Mantra:
🔹 "Aesthetic = 27.5%, Plastic Accessory = 22.8%, Structural Metal Part = 87.5%!"
🔹 "Don't let 'Metal' kill your margin. Argue for 'Decoration'!"
📌 Pro Tip:
If your bumper lip is made of Carbon Fiber or Fiberglass, check if it fits 8714.99.80.00 (27.5%) rather than metal codes. This can save you 60% in taxes compared to the metal part classification.
📣 Immediate Action:
📞 Consult a Customs Broker for Advance Ruling on material classification.
🚀 Provide clear photos and material declarations to support the "Aesthetic/Decoration" argument over "Structural Part."
💡 Your profit margin depends on this 60% tax difference!
✨ Professional Clearance Starts with Precise Classification!
💼 Every Percent of Tariff Counts!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.