再生纤维素塑料条
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3916905000 | 40.8% | CN | US | Official Doc |
| 3916903000 | 41.5% | CN | US | Official Doc |
| 3926909989 | 22.8% | CN | US | Official Doc |
| 3926906090 | 39.2% | CN | US | Official Doc |
| 3912900090 | 40.2% | CN | US | Official Doc |
| 3912110000 | 40.6% | CN | US | Official Doc |
Product Images
AI Analysis
🌿 Recycled Cellulose Plastic Strips
🌐 HS Code Classification & Tariff Guide | 2026 Updated Customs Strategy | Expert Compliance Insights
📌 One Product, Multiple HS Codes — Why? How to Choose the Right One?
✅ Product Name: Recycled Cellulose Plastic Strips
✅ Material: Regenerated cellulose-based plastic (bio-based, semi-synthetic polymer)
✅ Form: Strip-shaped (flat, narrow, continuous profile)
✅ Key Challenge: Multiple possible HS codes due to material origin, shape, and intended use — misclassification = 40%+ tariff risk
📦 二、HS Code Classification Breakdown (2026 Updated Tariff Matrix)
| HS Code | Product Description | Why This Classification? | Key Trigger Factors |
|---|---|---|---|
3912.11.00.00 |
Regenerated cellulose plastic strips — primary form of cellulose derivatives, in strip form | Chemical origin: Treated as cellulose derivatives in primary form under Section 39.12 | - Contains regenerated cellulose - Not yet processed into final product - Shape: strip |
3926.90.99.89 |
Other plastic articles not specified, in strip form | General category: Used when no more specific subheading applies | - Not covered by other plastic subheadings - Generic "other plastic" classification |
3926.90.60.90 |
Plastic strips or tapes, used as belts, bands, or similar | Functional use: If intended for use as belt, strap, or webbing | - Functionally resembles a belt/strap - Could be used in industrial or consumer goods (e.g., packaging, wearable) |
3916.90.50.00 |
Other plastic rods, sticks, or profiles (not specified), in strip form | Physical shape: Matches "rod or profile" category under 3916 | - Solid, continuous, non-tubular shape - Cross-section: flat or rectangular |
3916.90.30.00 |
Biobased plastic raw material, in strip form, for single filaments or rods | Material origin + form: Emphasizes bio-based plastic and filament-like structure | - Derived from renewable sources - May be precursor for fibers or monofilaments |
3912.90.00.90 |
Other primary forms of cellulose and derivatives, in strip form | Broad category: Covers any unprocessed cellulose derivative not listed elsewhere | - Generic "other" classification under 3912 - Used when no more specific subheading fits |
🔍 Critical Insight:
The same physical product can fall under 6 different HS codes, depending on intent, material origin, and processing stage.
Choose wisely — the wrong code = 40%+ tax.
💰 三、2026 U.S. Tariff Breakdown (With Full Legal Basis)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: November 10, 2025 (inclusive)
✅ Legal Basis: U.S. Trade Act Section 301, IEEPA, and U.S. Customs Footnotes
🎯 1. 3912.11.00.00 — Regenerated Cellulose, Primary Form (Strip)
| Item | Detail |
|---|---|
| Base Duty | 5.6% (ad valorem) |
| Section 301 (USITC) Additional Duty | +25.0% |
| IEEPA Emergency Tariff (Section 122) | +10.0% |
| Total Effective Rate | 40.6% |
| Tax Calculation | CIF Value × 40.6% |
| De Minimis Exemption? | ❌ No (denied under 19 CFR § 152.73) |
| Legal Pathway | IEEPA:9903.01.25 → USITC:3912.11.00.00 → FOOTNOTE:9903.88.01 |
📌 Why This Applies:
- Regenerated cellulose is a chemical derivative of cellulose, classified under 3912.11 as primary form. - Even in strip form, if not further processed, it remains in this category. - No functional use is implied — purely material-based classification.
🎯 2. 3926.90.99.89 — Other Plastic Articles, Not Specified (Strip)
| Item | Detail |
|---|---|
| Base Duty | 5.3% |
| Section 301 (USITC) Additional Duty | +7.5% |
| IEEPA Emergency Tariff (Section 122) | +10.0% |
| Total Effective Rate | 22.8% |
| Tax Calculation | CIF × 22.8% |
| De Minimis Exemption? | ❌ No |
| Legal Pathway | IEEPA:9903.01.24 → USITC:3926.90.99.89 → FOOTNOTE:9903.88.01 |
📌 Why This Applies:
- Used when the item doesn’t fit into a more specific subheading. - If the intended use is unclear, or it’s not clearly a rod, belt, or filament, this is the fallback. - Lower tariff than 3912.11 — but only if you cannot justify a more specific code.
🎯 3. 3926.90.60.90 — Plastic Strips Used as Belts or Bands
| Item | Detail |
|---|---|
| Base Duty | 4.2% |
| Section 301 (USITC) Additional Duty | +25.0% |
| IEEPA Emergency Tariff (Section 122) | +10.0% |
| Total Effective Rate | 39.2% |
| Tax Calculation | CIF × 39.2% |
| De Minimis Exemption? | ❌ No |
| Legal Pathway | IEEPA:9903.01.25 → USITC:3926.90.60.90 → FOOTNOTE:9903.88.01 |
📌 Why This Applies:
- If the product is used as a belt, strap, or webbing (e.g., in packaging, footwear, industrial machinery), this code applies. - Functional use overrides material origin. - High risk of misclassification — if not truly used as a belt, this code is incorrect.
🎯 4. 3916.90.50.00 — Other Plastic Rods/Profiles (Strip Form)
| Item | Detail |
|---|---|
| Base Duty | 5.8% |
| Section 301 (USITC) Additional Duty | +25.0% |
| IEEPA Emergency Tariff (Section 122) | +10.0% |
| Total Effective Rate | 40.8% |
| Tax Calculation | CIF × 40.8% |
| De Minimis Exemption? | ❌ No |
| Legal Pathway | IEEPA:9903.01.25 → USITC:3916.90.50.00 → FOOTNOTE:9903.88.01 |
📌 Why This Applies:
- If the strip has a solid, rod-like cross-section (e.g., flat, rectangular, or oval), it fits 3916.90.50.00. - Not for use as belt or filament, but as a structural profile. - High tariff, but correct if shape matches.
🎯 5. 3916.90.30.00 — Biobased Plastic Raw Material (Strip, Filament/Bar)
| Item | Detail |
|---|---|
| Base Duty | 6.5% |
| Section 301 (USITC) Additional Duty | +25.0% |
| IEEPA Emergency Tariff (Section 122) | +10.0% |
| Total Effective Rate | 41.5% |
| Tax Calculation | CIF × 41.5% |
| De Minimis Exemption? | ❌ No |
| Legal Pathway | IEEPA:9903.01.25 → USITC:3916.90.30.00 → FOOTNOTE:9903.88.01 |
📌 Why This Applies:
- If the product is marketed as a biobased raw material for filaments, monofilaments, or rods. - Emphasis on renewable origin and use as precursor. - Highest tariff — but only if you can prove it’s a raw material.
🎯 6. 3912.90.00.90 — Other Primary Forms of Cellulose Derivatives (Strip)
| Item | Detail |
|---|---|
| Base Duty | 5.2% |
| Section 301 (USITC) Additional Duty | +25.0% |
| IEEPA Emergency Tariff (Section 122) | +10.0% |
| Total Effective Rate | 40.2% |
| Tax Calculation | CIF × 40.2% |
| De Minimis Exemption? | ❌ No |
| Legal Pathway | IEEPA:9903.01.25 → USITC:3912.90.00.90 → FOOTNOTE:9903.88.01 |
📌 Why This Applies:
- Used when the item is cellulose derivative, but not covered by 3912.11.00.00. - Often used as a fallback when the product is not clearly in primary form. - Slightly lower than 3912.11, but still high.
🛠️ 四、Customs Clearance Best Practices (Pro Tips)
✅ 1. Documentation Checklist (Must-Have)
| Document | Required? | Why It Matters |
|---|---|---|
| ✅ Product Technical Specs | ✔️ | Shows material, dimensions, processing stage |
| ✅ Material Safety Data Sheet (MSDS) | ✔️ | Confirms cellulose origin & bio-based nature |
| ✅ Product Photos (360°, close-up) | ✔️ | Proves shape, surface, and form |
| ✅ Commercial Invoice | ✔️ | Must state “Recycled Cellulose Plastic Strip” |
| ✅ Certificate of Origin (CO) | ✔️ | Critical for tariff eligibility |
| ✅ Third-Party Test Report (e.g., ASTM, ISO) | ✔️ | Validates material composition |
| ✅ Use Case Statement | ✔️ | Explains intended application (e.g., raw material vs. belt) |
✅ 2.申报技巧（Key Rules of Thumb）
🔥 “Shape, Use, and Origin Decide the Code — Not the Name!”
| Scenario | Correct HS Code | Why? |
|---|---|---|
| Strip made from regenerated cellulose, not processed further | 3912.11.00.00 |
Material-based classification |
| Strip used as a belt in packaging | 3926.90.60.90 |
Functional use overrides |
| Strip has solid rod-like cross-section | 3916.90.50.00 |
Shape-based classification |
| Marketed as biobased raw material for filaments | 3916.90.30.00 |
Emphasis on origin & use |
| Unclear use, not covered by others | 3912.90.00.90 |
Fallback category |
✅ 3. Risk Mitigation Strategies
| Risk | Solution |
|---|---|
| Misclassification → 40%+ tax | Apply for Advance Ruling (Pre-Ruling) from U.S. CBP |
| Delayed clearance | Submit detailed use case + technical docs with invoice |
| Audit risk | Keep full chain of custody & test reports for 5+ years |
| High cost in U.S. | Consider Vietnam/Mexico production to avoid IEEPA/301 tariffs |
🌍 五、Global Tariff Comparison (2026)
| Country | Recommended HS Code | Base Duty | Additional Duties | Total Effective Rate | Notes |
|---|---|---|---|---|---|
| 🇺🇸 United States | Depends on use | 4.2%–6.5% | +25% (301) +10% (IEEPA) | 22.8%–41.5% | No de minimis |
| 🇨🇳 China | 3912.11.00.00 |
5% | None | 5% | Domestic trade |
| 🇪🇺 EU | 3912.11.00.00 |
0% | None | 0% | With CE mark |
| 🇦🇺 Australia | 3912.11.00.00 |
5% | None | 5% | No extra tariffs |
| 🇯🇵 Japan | 3912.11.00.00 |
0% | None | 0% | No附加税 |
📌 Insight:
- U.S. is the only market with 301 + IEEPA tariffs on this product. - China, EU, Japan, Australia have no additional tariffs — ideal for export.
📌 六、常见错误 & 避坑指南
❌ Error 1: Using 3926.90.99.89 just because it’s “generic”
👉 Result: Lower rate (22.8%), but only if no better code applies — risk of audit.
❌ Error 2: Claiming 3916.90.30.00 without proof of biobased raw material use
👉 Result: Misclassification → penalties + back duties
❌ Error 3: Not providing use case statement
👉 Result: Customs may default to highest tariff code (e.g., 41.5%)
❌ Error 4: Using “plastic strip” as the only description
👉 Result: No context → misclassification risk
✅ Correct Declaration Example:
"Recycled Cellulose Plastic Strip, 2 mm × 10 mm, 100 m roll, for use as raw material in bioplastic filament production, certified biobased (ASTM D6866), origin: China, CIF: $5,000"
🎯 七、Conclusion: Precision Wins — Avoid Costly Mistakes!
🎯 Remember the Golden Rule:
🔹 "Material + Shape + Use + Origin = Correct HS Code"
🔹 "One wrong code = 40%+ tax, audit, delay, and cost"✅ Pro Tip:
If your product is biobased, raw material, and strip-shaped,3916.90.30.00is often correct — but only if you can prove it.🚀 Action Step:
📞 Contact a U.S. Customs Broker + Request an Advance Ruling (Pre-Ruling)
📄 Submit technical specs, photos, and use case
✅ Get official code confirmation before shipment
📣 Your Product. Your Risk. Your Cost.
🛑 Don’t guess — classify with confidence!
✨ Professional Customs Compliance Starts Here
💼 Every dollar saved begins with the right HS code.
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.