冰球模具
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 8438800000 | 35.0% | CN | US | Official Doc |
| 7323999030 | 88.4% | CN | US | Official Doc |
| 7323999080 | 88.4% | CN | US | Official Doc |
| 3924905650 | 20.9% | CN | US | Official Doc |
| 3924104000 | 13.4% | CN | US | Official Doc |
| 8438909090 | 37.8% | CN | US | Official Doc |
AI Analysis
🧊 Ice Hockey Puck Molds (Molds for Ice Hockey Pucks)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Entry Strategy
📌 I. Product Definition & Classification: Do You Really Know "Ice Puck Molds"?
Ice hockey puck molds are specialized tools used to shape raw materials (rubber, thermoplastic, or composite materials) into the standard dimensions and weight required for ice hockey. In international trade, these items are typically classified based on their primary function (industrial machinery accessories) versus their material and end-use (kitchenware or general metal/plastic goods). Misclassification here can lead to drastic duty differences, especially under US trade policies.
⚠️ Key Distinction:
- If the item is specifically designed as an attachment/accessory for industrial food preparation machinery (e.g., automated ice cream/puck forming machines), it falls under HS 8438.80.00.00.
- If the item is a standalone kitchen tool made of metal (steel/iron) or plastic, it is classified as kitchenware/household articles under HS 7323 or HS 3924.
- The "Food" definition here is critical: If the puck is for sports use only, it is not food. However, many "puck molds" are marketed for ice pops/popsicles (which ARE food). Please verify your product's actual use. The data below reflects scenarios where the mold is either for food items (like ice pops) or generic kitchenware, as per the provided data structure. If strictly for sports pucks, the classification might differ, but we must adhere to the provided data which references "Food Preparation" and "Kitchen Use".
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
| HS Code | Product Description | Scenario | Material/Use |
|---|---|---|---|
8438.80.00.00 |
Parts and accessories for mechanical appliances for the preparation of food (e.g., ice cream/popsicles) | Industrial food processing equipment | N/A (Functional classification) |
7323.99.90.30 |
Kitchenware and household articles of iron or steel | Standalone metal molds for kitchen use | Iron/Steel |
7323.99.90.80 |
Other articles of iron or steel, kitchenware (molds) | General metal molds, other categories | Iron/Steel |
3924.90.56.50 |
Plastic tableware and kitchenware | Plastic molds for kitchen/food use | Plastic |
3924.10.40.00 |
Plastic tableware and kitchenware (cups, plates, etc.) | Plastic molds/forms classified as tableware | Plastic |
🔍 Critical Note:
- The data provided explicitly links HS 8438.80.00.00 to "Food Preparation (Ice Pops/Popsicles)". If your "Ice Hockey Puck Mold" is actually for making ice treats (often shaped like pucks or discs), this is the most accurate functional classification.
- If the product is for sports, it might not fit these "Food" categories perfectly. However, based on the provided data, we must explain the tax burden for these specific codes.
- Warning: The term "Ice Hockey" might be a mistranslation or specific marketing term for "Ice Pop" molds in some contexts. Ensure the actual usage determines the HS Code.
💰 III. 2026 Latest Tariff Rate Breakdown (Including Surtaxes & Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Time: From November 10, 2025 (including subsequent imports)
🎯 1. 8438.80.00.00 – Parts for Food Preparation Machinery
| Item | Content |
|---|---|
| Base Duty Rate | 0% (ad valorem) |
| Section 301 Surtax | +25% (Standard Section 301 tariff) |
| Section 122 Duty | +10% (Specific tariff on certain goods) |
| Total Rate | 35.0% |
| Tax Calculation | CIF Value × 35% |
| De Minimis Eligibility | ❌ No (Subject to de minimis exemption limits) |
| Legal Basis Path | HTSUS:8438.80.00.00 → 301:10% → 122:10% |
📌 Explanation:
- This is the lowest tax burden among the options.
- It applies because the item is considered an accessory to machinery rather than a finished consumer good.
- Crucial: You must prove the mold is used in industrial food processing (e.g., for factories making ice cream/popsicles), not just home kitchen use.
🎯 2. 7323.99.90.30 – Kitchenware of Iron/Steel
| Item | Content |
|---|---|
| Base Duty Rate | 3.4% |
| Section 301 Surtax | +25% |
| Section 122 Duty | +10% |
| Steel/Aluminum/Copper Surcharge | +50% (Specific surcharge on steel products) |
| Total Rate | 88.4% |
| Tax Calculation | CIF Value × 88.4% |
| De Minimis Eligibility | ❌ No |
| Legal Basis Path | HTSUS:7323.99.90.30 → 301:25% → 122:10% → Steel Surcharge: 50% |
📌 Warning:
- Extremely High Tax!
- The 50% additional duty on steel is applied because iron/steel kitchenware is targeted under specific trade measures.
- Avoid this classification if possible, unless the item is purely a finished steel kitchen tool and cannot be reclassified.
🎯 3. 7323.99.90.80 – Other Iron/Steel Articles (Kitchenware)
| Item | Content |
|---|---|
| Base Duty Rate | 3.4% |
| Section 301 Surtax | +25% |
| Section 122 Duty | +10% |
| Steel/Aluminum/Copper Surcharge | +50% |
| Total Rate | 88.4% |
| Tax Calculation | CIF Value × 88.4% |
| De Minimis Eligibility | ❌ No |
| Legal Basis Path | HTSUS:7323.99.90.80 → 301:25% → 122:10% → Steel Surcharge: 50% |
📌 Note:
- Same as above. The 50% steel surcharge is the killer here.
- Even if classified as "Other," if it's steel, the 50% surcharge applies.
🎯 4. 3924.90.56.50 – Plastic Tableware/Kitchenware
| Item | Content |
|---|---|
| Base Duty Rate | 3.4% |
| Section 301 Surtax | +7.5% |
| Section 122 Duty | +10% |
| Total Rate | 20.9% |
| Tax Calculation | CIF Value × 20.9% |
| De Minimis Eligibility | ❌ No |
| Legal Basis Path | HTSUS:3924.90.56.50 → 301:7.5% → 122:10% |
📌 Advantage:
- Plastic products are not subject to the 50% steel surcharge.
- The Section 301 rate is lower (7.5% vs 25%) for some plastic categories, or at least the base structure is more favorable than steel.
- Recommendation: If the mold is plastic, this is a better option than steel.
🎯 5. 3924.10.40.00 – Plastic Tableware (Cups, Plates, etc.)
| Item | Content |
|---|---|
| Base Duty Rate | 3.4% |
| Section 301 Surtax | 0% |
| Section 122 Duty | +10% |
| Total Rate | 13.4% |
| Tax Calculation | CIF Value × 13.4% |
| De Minimis Eligibility | ❌ No |
| Legal Basis Path | HTSUS:3924.10.40.00 → 301:0% → 122:10% |
📌 Best Option for Plastic:
- Lowest Tax Burden among the plastic categories.
- 0% Section 301 Surtax is a huge advantage.
- Strategy: If the product is a plastic mold, try to argue it falls under 3924.10 (Tableware/Form) rather than "Other" (3924.90). This can save you 7.5% in Section 301 duties.
🛠️ IV. Customs Clearance Practical Advice (Battle-Tested Pitfall Guide)
✅ 1. Documentation Checklist (Absolutely Required)
| Document | Must Provide | Explanation |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Dimensions, material (Steel/Plastic), intended use (Food/Machinery Accessory) |
| ✅ Product Photos (Clear Label) | ✔️ | Show the mold shape, any branding, and material texture |
| ✅ Commercial Invoice | ✔️ | Clearly state "Mold for Ice Pops/Food Preparation" or "Plastic Kitchen Mold" |
| ✅ Packing List | ✔️ | Show if molds are packed with machinery accessories or as standalone goods |
| ✅ Letter of Guarantee | ✔️ | Confirm the product is not for sports use if claiming "Food" classification |
| ✅ Third-Party Test Report | ✔️ | FDA, LFGB, or Food Safety compliance reports (if claiming food use) |
✅ 2. Declaration Strategy (Key Mantra)
🔥 "Machinery Accessory, 35%; Plastic Tableware, 13.4%; Steel Kitchen, 88.4%!"
| Scenario | Correct Declaration | Wrong Practice |
|---|---|---|
| Industrial Food Mold | 8438.80.00.00 |
Misdeclare as "Kitchenware" → 88.4% |
| Plastic Mold (General) | 3924.10.40.00 |
Misdeclare as "Other Plastic" → 20.9% |
| Steel Mold | 7323.99.90.30 |
Hope for exemption → 88.4% |
| Sports Puck Mold | Not in Data | Use Food HS Code → Risk of Misdeclaration Penalty |
📌 Important:
- If your product is strictly for sports (Ice Hockey Pucks), none of these HS codes are technically correct. You may need to find a different HS Code (e.g., 9506.99.00 for sports goods) which might have different tax rates.
- However, if you are forced to use the provided data, you must misrepresent the product as "Food/Kitchen" to use these codes, which is illegal and risks fraud penalties.
- Recommendation: Verify if the "Ice Hockey Puck Mold" is actually a marketing term for Ice Pop Molds. If it is for sports, contact a customs broker to find the correct Sports Goods HS Code.
✅ 3. Special Case Handling
| Case | Handling Advice |
|---|---|
| Material Change | If you can switch from Steel to Plastic, huge savings (88.4% → 13.4-20.9%) |
| OEM Orders | Provide design files to prove "Accessory" status for 8438.80 |
| Composite Materials | If steel + plastic, classify based on essential character |
| Set Packages | If mold comes with a machine, declare as machine accessory (8438.80) |
🌍 V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Estimated Tax | Remarks |
|---|---|---|---|
| 🇺🇸 USA | 8438.80.00.00 |
35% | Best for food machinery accessories |
| 🇺🇸 USA | 3924.10.40.00 |
13.4% | Best for plastic tableware/molds |
| 🇺🇸 USA | 7323.99.90.30 |
88.4% | Avoid if possible (Steel) |
| 🇨🇳 China | 8438.80.00.00 |
~5-10% | Lower base rates, no Section 301 |
| 🇪🇺 EU | 8438.80.00.00 |
~5-10% | No Section 301, no 122 |
📌 Conclusion:
- USA is the most expensive market due to Section 301 and 122 tariffs.
- Plastic molds are significantly cheaper than steel molds in the US.
- Machinery accessories offer a middle ground (35%) if the product is truly for food processing.
📌 VI. Common Mistakes & Pitfall Guide (Blood-Tears Lessons)
❌ Mistake 1: Classifying a Steel Mold as "Plastic"
👉 Consequence: Fraud Detection, Seizure, Heavy Fines!
❌ Mistake 2: Declaring a Sports Puck Mold as "Food Mold"
👉 Consequence: Customs Audit, Product Seizure, Potential Legal Action!
👉 Solution: Find the correct Sports Goods HS Code (e.g., 9506).
❌ Mistake 3: Ignoring the 50% Steel Surcharge
👉 Consequence: Unexpected $8,840 duty on $10,000 cargo!
👉 Solution: Use plastic or machinery accessory classification if possible.
❌ Mistake 4: Splitting "Mold + Machine" Shipment
👉 Consequence: If the mold is an accessory, declare together to get 35% instead of higher rates for separate parts.
✅ Correct Approach:
"Plastic Ice Pop Mold, Food Grade, Model XYZ, FDA Compliant" →
3924.10.40.00→ 13.4%
"Industrial Ice Cream Mold Attachment" →8438.80.00.00→ 35.0%
🎯 VII. Conclusion: Professional Declaration, Save Costs!
🎯 Remember the Mantra:
🔹 "Plastic First, 13.4%! Steel Last, 88.4%! Machinery Middle, 35%!"
🔹 "Sports? Not Food! Find the Right Code!"
📌 Pro Tip:
If your product is strictly for sports (Ice Hockey Pucks), do not use the Food HS Codes. Contact a customs broker to classify under 9506.99.00 (Other sports equipment) or similar. The tax rate for sports goods may be different (often lower for Section 301, but check current rules).
If you must use the provided data, ensure the product is actually for food/kitchen use.
📣 Immediate Action:
📞 Contact a Customs Broker + Provide Product Photos + Apply for Advance Ruling
🚀 Let your products Clear Customs Smoothly, High Efficiency, Profit Maximized!
✨ Professional Customs Clearance Starts with Accurate Classification!
💼 Every Penny of Cost Deserves to be Calculated Precisely!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.