医用无缝橡胶手套
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 4014905000 | 14.2% | CN | US | Official Doc |
| 3926201010 | 10.0% | CN | US | Official Doc |
| 3926201020 | 10.0% | CN | US | Official Doc |
| 6116105510 | 30.7% | CN | US | Official Doc |
| 6116104810 | 36.1% | CN | US | Official Doc |
AI Analysis
🧤 Medical Seamless Rubber Gloves (Hygienic/Medical Use)
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Compliance Strategy
📌 I. Product Definition & Classification: Do You Really Know "Seamless Surgical Gloves"?
"Medical Seamless Rubber Gloves" refer to hand-worn protective devices designed for surgical procedures, medical examinations, or hygiene purposes. In international trade, their classification hinges on two critical factors: Material (Natural Rubber/Latex vs. Synthetic Plastic) and Form (Seamless/Latex-dipped vs. Textile-based).
Key Distinction Logic: * Rubber/Latex (Vulcanized): Classified under Chapter 40 (Rubber). Specifically for hygienic/medical use. * Plastic/Synthetic (Non-vulcanized or Coated): Classified under Chapter 39 or 61. "Seamless" often implies dipped molding (Plastic) or specific textile coatings.
⚠️ Critical Classification Point:
- If made of natural rubber (latex) or synthetic rubber (nitrile) and used for hygiene/medicine → Chapter 40 (4014.90.50.00)
- If made of plastic/rubber coating (non-vulcanized specific structure) for surgical use → Chapter 39 (3926.20.10)
- If made of textile fabric coated with rubber/plastic → Chapter 61 (6116.10.)
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
Based on the provided data analysis, here are the five matched HS Codes with their specific rationales and tax implications:
| HS Code | Product Description | Matching Logic & Summary | Total Tax Rate |
|---|---|---|---|
4014.90.50.00 |
Hygienic or Medical Goods, of Rubber (excluding vulcanized hard rubber) | Match Basis: The term "Gloves" implies medical/hygienic use. Common sense dictates the material is vulcanized rubber (Latex/Nitrile). Matches the "hygienic or medical goods" purpose and material characteristics of this code. No obvious conflicts. | 14.2% |
3926.20.10.10 |
Other Articles of Plastics: Gloves, Mittens, etc., for Surgical or Medical Use | Match Success: The item is "Seamless," and the use is "Surgical/Examination" (fits surgical/medical use). Material inferred as plastic/rubber-based artifacts. Fully consistent with the code's characteristics. | 10.0% |
3926.20.10.20 |
Other Articles of Plastics: Gloves, etc. (Other) | Match Basis: "Surgical" corresponds to "Surgical or Medical Use"; "Seamless" corresponds to form; "Gloves" to the name. Although "disposable" isn't explicitly stated, it can be reasonably inferred as a disposable consumable for medical surgery, with plastic material logic. | 10.0% |
6116.10.55.10 |
Gloves, mittens, and mitts, impregnated, coated, covered or laminated with plastics, of knit or crochete | Match Form (No Finger Seam/Seamless) & Use (Gloves); Inferred material is textile fiber or rubber/plastic coating, no conflict with classification material requirements. | 30.7% |
6116.10.48.10 |
Gloves, etc., of knit or crochete, impregnated, coated, covered or laminated with plastics | Match Basis: "Seamless Surgical Examination Gloves" imply medical/examination use and glove form. Common sense suggests surgical gloves are made of latex or synthetic materials (fits impregnated/coated plastic/rubber features). "Seamless" aligns with "no finger seams" logic. No material conflict. | 36.1% |
🔍 Key Reminder:
- Code4014.90.50.00is the most standard for Natural Rubber (Latex) medical gloves. - Codes3926.20.10.10/.20are typically for Plastic/Coated surgical gloves (often nitrile or polyethylene-based coatings). - Codes6116.10.*are for Fabric-based gloves with a rubber/plastic coating (less common for high-grade surgical seamless gloves, but possible for examination gloves).
💰 III. 2026 Latest Tariff Rate Breakdown (Including Surcharges & Policy Add-ons)
✅ Applicable Country: United States (US)
✅ Origin: China (CN)
✅ Effective Date: From November 10, 2025 (including subsequent imports)
🎯 1. 4014.90.50.00 —— Hygienic/Medical Rubber Gloves
| Item | Detail |
|---|---|
| Base Tariff | 4.2% (ad valorem) |
| Section 301 Surcharge (Add-on Tariff) | 0.0% |
| Section 122 Tariff (IEEPA China Add-on) | +10.0% |
| Total Tariff Rate | 14.2% |
| Tax Calculation | CIF Value × 14.2% |
| De Minimis Exemption Available? | ❌ No (Deny De Minimis for Section 122 goods) |
| Legal Basis Path | IEEPA:9903.01.25 (Section 122) → USITC:4014.90.50.00 |
📌 Explanation:
- "Base 4.2%": Standard MFN tariff for rubber hygienic goods. - "Section 122 +10%": This is the key surcharge. Under Section 122 of the Trade Expansion Act (or related IEEPA provisions for specific Chinese goods), an additional 10% applies to these goods originating from China. - "Total 14.2%": This is the final landing cost tariff impact for standard medical rubber gloves from China.
🎯 2. 3926.20.10.10 & .20 —— Plastic/Coated Surgical Gloves
| Item | Detail |
|---|---|
| Base Tariff | 0.0% |
| Section 301 Surcharge | 0.0% |
| Section 122 Tariff (IEEPA China Add-on) | +10.0% |
| Total Tariff Rate | 10.0% |
| Tax Calculation | CIF Value × 10.0% |
| De Minimis Exemption Available? | ❌ No (Deny De Minimis for Section 122 goods) |
| Legal Basis Path | IEEPA:9903.01.25 (Section 122) → USITC:3926.20.10.xx |
📌 Explanation:
- These plastic-based surgical gloves have a lower base rate (0%) compared to rubber. - However, they are still subject to the 10% Section 122 surcharge for Chinese origin. - Total 10%: This is the most cost-effective option if the gloves are indeed classified as plastic/coated rather than vulcanized rubber.
🎯 3. 6116.10.55.10 & .48.10 —— Textile/Coated Gloves
| Item | Detail |
|---|---|
| Base Tariff | 13.2% (for .55) / 18.6% (for .48) |
| Section 301 Surcharge | 7.5% |
| Section 122 Tariff (IEEPA China Add-on) | +10.0% |
| Total Tariff Rate | 30.7% (.55) / 36.1% (.48) |
| Tax Calculation | CIF Value × 30.7% / 36.1% |
| De Minimis Exemption Available? | ❌ No |
| Legal Basis Path | IEEPA:9903.01.25 + USITC:6116.10.xx + Section 301 Footnote |
📌 Explanation:
- These codes apply if the gloves are knitted/crocheted fabric coated with plastic/rubber. - High Tariff Risk: These carry both a Section 301 surcharge (7.5%) AND the Section 122 surcharge (10%), plus a high base rate. - Avoid Classification Error: Do NOT classify standard seamless latex/nitrile surgical gloves under these codes. It is likely incorrect and leads to overpayment or audit risks.
🛠️ IV. Customs Clearance Practical Advice (Field Pitfall Avoidance Guide)
✅ 1. Documentation Checklist (Non-negotiable)
| Document | Must Provide | Description |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Must specify: Material (Natural Rubber/Nitrile/Plastic), Sterile/Non-sterile, Size, Latex Protein Content (if applicable). |
| ✅ Composition Declaration | ✔️ | Explicitly state "100% Vulcanized Natural Rubber" OR "Synthetic Plastic Coating" to justify HS Code. |
| ✅ Photos (Label & Product) | ✔️ | Clear image of the glove, packaging, and any "CE/FDA" marks. |
| ✅ Commercial Invoice | ✔️ | Must state "Medical Use" or "Surgical Examination" to match the sub-heading description. |
| ✅ Certificate of Origin (CO) | ✔️ | To prove Chinese origin (which triggers the 10% Section 122 tax). |
| ✅ FDA Registration (if applicable) | ✔️ | For medical devices, ensure FDA 510(k) or Establishment Registration is valid. |
✅ 2. Declaration Tips (Key Mantras)
🔥 "Material Defines Code, Use Defines Sub-heading, Section 122 Applies to All!"
| Scenario | Correct Declaration | Wrong Approach |
|---|---|---|
| Standard Latex/Nitrile Gloves | 4014.90.50.00 (Hygienic/Medical Rubber) |
Misclassifying as 6116 (Textile) → 30-36% Tax (Overpay) or 3926 (Plastic) → Audit Risk |
| Plastic-Coated Examination Gloves | 3926.20.10.10 or .20 |
Declaring as 4014 (Rubber) → Wrong Material |
| Textile Gloves with Rubber Coating | 6116.10.55.10 |
Only use if actually made of knitted fabric. |
| Origin: China | Expect 10% Section 122 on ALL codes | Assuming "Free Trade" or no surcharge |
📌 Critical Note:
Regardless of whether you choose4014(14.2%) or3926(10.0%), both are subject to the 10% Section 122 surcharge for Chinese origin. The difference is in the base rate.
✅ 3. Special Handling Cases
| Case | Handling Advice |
|---|---|
| "Seamless" vs. "Seamed" | "Seamless" (lathe-formed) is typical for high-quality medical gloves. Ensure description matches 4014.90.50.00 (hygienic goods). |
| Sterile vs. Non-Sterile | Both fall under the same HS Code, but sterile gloves may require additional FDA documentation. |
| Latex Allergy Warning | If labeled "Latex Free" (Nitrile/Neoprene), still classifiable under 4014 if rubber-based, or 3926 if synthetic plastic. |
| Bulk vs. Retail | Bulk packaging does not change the HS Code, but affects duty calculation basis if volume discounts apply. |
🌍 V. Global Market Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Estimated Tariff (China Origin) | Key Requirements | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 4014.90.50.00 (Rubber) 3926.20.10 (Plastic) |
14.2% (Rubber) 10.0% (Plastic) |
FDA Registration, Labeling | Section 122 10% surcharge applies to both. |
| 🇨🇳 China | 4014.90.50.00 |
~5-10% | CCC (if applicable) | Standard import duties apply. |
| 🇪🇺 EU | 4014.90.90 / 3926.20.90 |
0% (Most) | CE Marking, MDR/IVDR Compliance | No Section 122 equivalent. |
| 🇯🇵 Japan | 4014.90.00.0 |
~0-8% | PMDA Notification | Low base tariffs, no major surcharges. |
📌 Conclusion:
- The USA is the most complex market due to the Section 122 10% surcharge on Chinese medical rubber/plastic goods. - European and Asian markets generally have lower or zero tariffs for these items, but stricter Medical Device Regulations (MDR/IVDR).
📌 VI. Common Errors & Pitfalls (Lessons from Experience)
❌ Error 1: Classifying Latex Gloves as 6116 (Textile) to avoid higher taxes.
👉 Consequence: Customs audit for misclassification. Penalties + Back Taxes + Interest.
👉 Correct: Latex/Nitrile = 4014.
❌ Error 2: Ignoring the Section 122 10% Surcharge.
👉 Consequence: Underpayment of duties by 10%. Seizure of Goods.
👉 Correct: Always add 10% to the calculated duty for Chinese-origin medical gloves.
❌ Error 3: Confusing 3926.20.10.10 and .20.
👉 Consequence: Administrative delay.
👉 Correct: .10 is for specific surgical/medical plastic gloves; .20 is general. Use .10 for precision if applicable.
❌ Error 4: Missing "Medical/Hygienic" in the declaration description.
👉 Consequence: May be classified under general-purpose rubber gloves (4014.90.90), which might have different tax treatments or regulatory requirements.
👉 Correct: Explicitly state "Hygienic or Medical Use" in the commercial invoice.
✅ Correct Practice:
"Medical Surgical Gloves, Seamless, Natural Rubber, Sterile, for Hygienic/Medical Use, Origin China, FDA Registered"
→ HS Code:4014.90.50.00
→ Total Tax: 14.2% (4.2% Base + 10% Section 122)
🎯 VII. Conclusion: Precision Classification Saves Money & Time!
🎯 Remember the Mantra:
🔹 "Latex/Nitrile = 4014 (14.2%)"; "Plastic Coating = 3926 (10.0%)"; "Textile = 6116 (30%+)"
🔹 "Section 122 10% Surcharge is Mandatory for China Origin!"
🔹 "Describe 'Medical Use' Clearly to Secure the Right Sub-heading."
📌 Pro Tip:
If your supply chain allows, consider sourcing gloves from Vietnam, Thailand, or India to potentially avoid the Section 122 10% surcharge (depending on specific country exemptions and USITC rules). However, ensure origin is genuinely shifted to avoid "transshipment" penalties.
📣 Immediate Action:
📞 Contact your customs broker with the Product Composition Sheet (Rubber vs. Plastic vs. Textile).
🚀 Pre-apply for an Advance Ruling if your volume is high to lock in the HS Code and tax liability.
✨ Professional Clearance Starts with Accurate Classification!
💼 Every percent of tax saved is pure profit!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.