卤化银照相纸卷
CN → US| HS Code | Tariff Rate | Origin | Destination | Doc |
|---|---|---|---|---|
| 3703103060 | 38.7% | CN | US | Official Doc |
| 3703103090 | 38.7% | CN | US | Official Doc |
| 4823904000 | 35.0% | CN | US | Official Doc |
| 4823906700 | 35.0% | CN | US | Official Doc |
| 4823906700 | 35.0% | CN | US | Official Doc |
Product Images
AI Analysis
📸 Silver Halide Photographic Paper Rolls
🌐 HS Code Reference & Customs Clearance Guide | 2026 Latest Tariff Analysis | Professional Clearance Strategy
📌 I. Product Definition & Classification: Do You Really Understand "Silver Halide Photographic Paper Rolls"?
Silver halide photographic paper rolls are a specialized type of photosensitive material used primarily in traditional darkroom printing and large-format photography. In international trade, the classification depends heavily on two factors: 1. Material Composition: Does it contain active light-sensitive chemicals (Silver Halides)? 2. Form & Dimensions: Is it a roll? If so, is the width > 610mm?
⚠️ Key Distinction:
- If the paper contains Silver Halide emulsion (photosensitive) AND width > 610mm → Chapter 37 (Photographic/ Cinematographic Goods).
- If the paper is merely Coated Paper (non-photosensitive or general purpose) OR width ≤ 610mm → Chapter 48 (Paper & Paperboard).
- Note: Even if labeled "Photographic Paper," if it lacks active silver halide emulsion or is too narrow, it may be classified under Chapter 48.
📦 II. HS Code Classification Details (2026 Latest Tariff Authority Comparison)
Based on the provided data, here are the five most likely HS Codes for "Silver Halide Photographic Paper Rolls," along with their tax implications.
| HS Code | Product Description | Matching Logic | Total Tax Rate (China to US) |
|---|---|---|---|
3703.10.30.60 |
Silver Halide Paper, Roll, >610mm | High Match: Explicitly mentions "Silver Halide" (卤化银) and "Roll" (卷). Fits Chapter 37 requirements for width > 610mm. | 38.7% |
3703.10.30.90 |
Silver Halide Paper, Roll, >610mm (Other) | High Match: Also identifies "Silver Halide" and "Roll." Similar to 60, but may represent other variations within the same chapter. | 38.7% |
4823.90.40.00 |
Other Paper Articles | Medium Match: Classifies as "Photographic Paper" under general paper products. Assumes it's paper-based but misses the specific "Silver Halide" photosensitive classification. | 35.0% |
4823.90.67.00 |
Coated Paper, Other | Medium-Low Match: Infers "Photographic Paper" = Coated Paper. Based on common sense that photo paper has coatings. However, it ignores the specific photosensitive nature (Silver Halide). | 35.0% |
4823.90.67.00 |
Coated Paper, Other (Silver Salt) | Medium-Low Match: Similar to above, but explicitly mentions "Silver Salt" (银盐). Still classifies under Chapter 48 instead of 37, which may lead to misclassification if the product is truly photosensitive. | 35.0% |
🔍 Critical Insight:
- Chapter 37 vs. Chapter 48: The biggest risk is misclassifying a photosensitive product (Chapter 37) as a non-photosensitive coated paper (Chapter 48).
- Why it matters: While Chapter 48 has a slightly lower base tax (0% vs 3.7%), both carry the same USITC 25% tariff and IEEPA 10% tariff, resulting in similar total rates. However, misclassification can lead to penalties, delays, or confiscation if customs verifies the chemical composition.
- Width Matters: HS3703.10.30.60specifically requires width > 610mm. If the roll is narrower, it may not fit this code.
💰 III. 2026 Latest Tariff Rate Breakdown (Including Surtaxes)
✅ Applicable Country: United States (US)
✅ Country of Origin: China (CN)
✅ Effective Date: From November 10, 2025 (and subsequent imports)
🎯 1. 3703.10.30.60 & 3703.10.30.90 —— Silver Halide Photographic Paper (Roll, >610mm)
| Item | Detail |
|---|---|
| Base Tariff Rate | 3.7% (ad valorem) |
| USITC Surtax (Section 301) | +25.0% (Based on USITC Footnote for Chapter 37 goods) |
| IEEPA Surtax | +10.0% (China/HK products, effective Nov 10, 2025) |
| Total Tax Rate | 38.7% |
| Tax Calculation | CIF Value × 38.7% |
| De Minimis Exemption | ❌ Not Eligible (deny_de_minimis) |
| Legal Basis Path | IEEPA:9903.01.25 → IEEPA:9903.01.24 → USITC:3703.10.30.60/90 → FOOTNOTE:9903.88.01 |
📌 Explanation:
- The 3.7% base rate applies to photographic paper under Chapter 37.
- The 25% Section 301 tariff is added because these are Chinese-origin goods.
- The 10% IEEPA tariff is an additional surcharge for China-origin imports.
- Total: 38.7%. This is a high tariff category. Misclassifying as Chapter 48 to save 3.7% is risky if the product is chemically photosensitive.
🎯 2. 4823.90.40.00 & 4823.90.67.00 —— Paper Products (Coated/Other)
| Item | Detail |
|---|---|
| Base Tariff Rate | 0.0% (ad valorem) |
| USITC Surtax (Section 301) | +25.0% (Based on USITC Footnote for Chapter 48 goods) |
| IEEPA Surtax | +10.0% (China/HK products, effective Nov 10, 2025) |
| Total Tax Rate | 35.0% |
| Tax Calculation | CIF Value × 35.0% |
| De Minimis Exemption | ❌ Not Eligible (deny_de_minimis) |
| Legal Basis Path | IEEPA:9903.01.25 → IEEPA:9903.01.24 → USITC:4823.90.40.00/67.00 → FOOTNOTE:9903.88.01 |
📌 Explanation:
- These codes fall under Chapter 48, which has a 0% base tariff.
- However, the 25% + 10% surcharges still apply, bringing the total to 35.0%.
- Savings: Compared to Chapter 37 (38.7%), this saves 3.7%.
- Risk: If Customs determines the product is silver halide photographic paper, they will reclassify it to Chapter 37, leading to back taxes + penalties. Only use this if the paper is non-photosensitive (e.g., plain photographic printing paper without emulsion) or width ≤ 610mm.
🛠️ IV. Customs Clearance Practical Advice (Avoiding Pitfalls)
✅ 1. Required Documentation (Must-Have)
| Document | Required? | Notes |
|---|---|---|
| ✅ Product Specification Sheet | ✔️ | Must state: Material (Silver Halide/Coated), Emulsion Type, Width, Length, Sensitivity. |
| ✅ Chemical Composition Report | ✔️ | Crucial: Prove whether it contains "Silver Halide" (photosensitive) or is just "Coated Paper" (non-sensitive). |
| ✅ Product Photos | ✔️ | Clear images of the roll, packaging, and any labels indicating "Silver Halide" or "Photographic." |
| ✅ Commercial Invoice | ✔️ | Must match HS Code description. Do not use vague terms like "Paper." |
| ✅ Packing List | ✔️ | Detail dimensions (width/length) to prove >610mm if claiming Chapter 37. |
| ✅ Certificate of Origin (CO) | ✔️ | To determine eligibility for any potential exemptions (rare for China). |
✅ 2. Declaration Tips (Key Mantra)
🔥 "Silver Halide = Ch37, Coated Paper = Ch48, Width Matters, Emulsion is Key!"
| Scenario | Correct HS Code | Wrong Practice | Consequence |
|---|---|---|---|
| Photosensitive Silver Halide Roll, >610mm | 3703.10.30.60 or 90 |
Declare as 4823.90.67.00 |
Audit Risk: Customs may demand chemical proof, leading to delays/fines. |
| Non-Photosensitive Coated Paper Roll | 4823.90.67.00 |
Declare as 3703.10.30.60 |
Overpayment: Pay 38.7% instead of 35.0%. |
| Roll Width ≤ 610mm | 4823.90.40.00 or other Ch48 |
Declare as 3703.10.30.60 |
Misclassification: Code 3703.10.30.60 requires >610mm. |
| Small Sample Rolls (≤10cm) | 4823.90.40.00 |
Declare as industrial roll | Risk: Small rolls may not fit Chapter 37 definitions for industrial photographic paper. |
✅ 3. Special Cases Handling
| Scenario | Handling Advice |
|---|---|
| "Silver Salt" vs. "Digital Paper" | If the paper is digital printing paper (no silver halide), it must go to Chapter 48. Do not use Chapter 37. |
| Width Exactly 610mm | Chapter 37.10 requires >610mm. If width is exactly 610mm, it may not fit 3703.10.30.60. Check other Chapter 37 codes or consider Chapter 48. |
| OEM/Custom Printing | Provide pre-printed samples and design files. If the base paper is unexposed silver halide, it’s still Ch37. |
| Packaging Includes Developer | If the kit includes chemical developers, it may be classified as a kit. Consult a customs broker for kit classification rules. |
🌍 V. Global Customs Comparison (2026 Latest)
| Country/Region | Recommended HS Code | Tax Rate (China Origin) | Certification | Notes |
|---|---|---|---|---|
| 🇺🇸 USA | 3703.10.30.60 |
38.7% | None specific | High tariff due to Section 301 + IEEPA. |
| 🇺🇸 USA | 4823.90.67.00 |
35.0% | None specific | Only if non-photosensitive. |
| 🇨🇳 China | 3703.10.30.60 |
5-10% (Import) | CCC (if applicable) | Low import tax into China. |
| 🇪🇺 EU | 3703.40 |
0-6.5% | REACH Compliance | No Section 301/IEEPA surcharges. |
| 🇯🇵 Japan | 3703.10 |
6-12% | PSE (if electronic) | Standard MFN rates apply. |
📌 Conclusion:
- USA is the most expensive market due to 35-39% total tariffs.
- Misclassification is the biggest risk. If you declare Ch48 for a Ch37 product, you risk penalties.
- Consider Supply Chain Shifts: If possible, source from non-China origins to avoid 25%+10% surcharges.
📌 VI. Common Mistakes & Pitfalls (Blood & Tears Lessons)
❌ Mistake 1: Declaring "Silver Halide Paper" as "Coated Paper" (Ch48) to save 3.7%
👉 Result: Customs audits chemical content. If silver halide is detected, back taxes + 20% penalty apply.
❌ Mistake 2: Ignoring the 610mm width requirement for 3703.10.30.60
👉 Result: Customs rejects the code. Must re-declare, causing shipment delays.
❌ Mistake 3: Vague Description: "Photographic Paper"
👉 Result: Customs cannot determine if it's Ch37 or Ch48. Holds shipment for clarification.
❌ Mistake 4: Assuming De Minimis (Section 321) applies
👉 Result: No exemption for China-origin goods under IEEPA/301. All taxes apply.
✅ Correct Approach:
"Silver Halide Photographic Paper Roll, Width 630mm, Unexposed, Darkroom Printing Use, Model XYZ, Origin China"
🎯 VII. Conclusion: Precise Classification Saves Money & Time!
🎯 Remember the Mantra:
🔹 "Silver Halide = Ch37, Coated Paper = Ch48, >610mm Width is Key for Ch37."
🔹 "38.7% vs 35.0%: The 3.7% Savings is Not Worth the Audit Risk if the Product is Photosensitive."
🔹 "HS Code Determines Tax, Tax Determines Profit, Classification Determines Clearance Speed."
📌 Pro Tip:
- If your product is non-photosensitive (e.g., plain paper for inkjet printing), insist on Chapter 48 (4823.90.67.00) to save 3.7%.
- If it is truly silver halide, use Chapter 37 (3703.10.30.60) to avoid misclassification penalties.
- Pre-Ruling: Consider applying for an Advance Ruling with US Customs if the product is ambiguous.
📣 Take Action Now:
📞 Consult a Licensed Customs Broker + Provide Chemical Composition Report + Apply for Advance Ruling if Needed
🚀 Ensure Smooth Clearance, Maximize Profit, Minimize Risk!
✨ Professional Clearance Starts with Accurate Classification!
💼 Every Percent Saved is Pure Profit!
Customer Reviews
About HS Code Classification
The Harmonized System (HS) is an internationally standardized nomenclature developed by the World Customs Organization (WCO) to classify traded products. Over 200 countries use the HS system as the basis for customs tariffs, trade statistics, and import/export regulations.
Each HS code follows a hierarchical structure:
- Chapter (2 digits) — Broad category of goods (e.g., Chapter 84: Machinery and Mechanical Appliances)
- Heading (4 digits) — More specific grouping within the chapter
- Subheading (6 digits) — Internationally standardized breakdown, used by all WCO member countries
- National subdivisions (8-10 digits) — Country-specific extensions for further classification, such as US HTSUS 10-digit codes
Correct HS code classification is essential for smooth customs clearance, accurate duty payment, and compliance with trade regulations. Misclassification can lead to customs delays, overpayment of duties, or penalties.
When importing from CN to US, the applicable tariff rates may include:
- Most-Favored-Nation (MFN) rate — The standard duty rate applied to WTO members
- General rate — Applied to countries without trade agreements
- Trade remedy duties — Additional tariffs such as Section 301 (anti-dumping), Section 232 (national security), or countervailing duties
The information provided on this page is for reference purposes only. For official classification, please consult with your local customs authority or a licensed customs broker.